mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
4070e2a64c
This target adds support for the StarFive JH7100 and JH7110 SoCs, based on 6.1, as well as a couple boards equipped with these. Specifications: SoCs: JH7100: - StarFive JH7100 dual-core RISC-V (U74, RC64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache JH7110: - StarFive JH7110 quad-core RISC-V (U74, RV64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache Boards: VisionFive1: - JH7100 @ 1GHz - Memory: 8Gb LPDDR4 - 4x USB3.0 - 1x GBit ethernet - AMPak 6236 wifi / bluetooth - audio - powered via USB-C VisionFive2: - JH7110 @ 1.5GHz - Memory: 2/4/8Gb DDR4 - 2x Gbit ethernet - 2x USB3.0 / 2x USB2.0 - eMMC / SDIO - various multimedia input/outputs (MIPI CSI, HDMI, audio) - M.2 key M slot - PoE support - powered via USB-C Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
676 lines
19 KiB
Diff
676 lines
19 KiB
Diff
From e835861823130ae47665db5e8039a7097ede14e4 Mon Sep 17 00:00:00 2001
|
|
From: Xingyu Wu <xingyu.wu@starfivetech.com>
|
|
Date: Tue, 14 Mar 2023 21:24:36 +0800
|
|
Subject: [PATCH 105/122] drivers: watchdog: Add StarFive Watchdog driver
|
|
|
|
Add watchdog driver for the StarFive JH7100 and JH7110 SoC.
|
|
|
|
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
|
|
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
|
|
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
---
|
|
MAINTAINERS | 7 +
|
|
drivers/watchdog/Kconfig | 11 +
|
|
drivers/watchdog/Makefile | 3 +
|
|
drivers/watchdog/starfive-wdt.c | 606 ++++++++++++++++++++++++++++++++
|
|
4 files changed, 627 insertions(+)
|
|
create mode 100644 drivers/watchdog/starfive-wdt.c
|
|
|
|
--- a/MAINTAINERS
|
|
+++ b/MAINTAINERS
|
|
@@ -19715,6 +19715,13 @@ S: Supported
|
|
F: Documentation/devicetree/bindings/rng/starfive*
|
|
F: drivers/char/hw_random/starfive-trng.c
|
|
|
|
+STARFIVE WATCHDOG DRIVER
|
|
+M: Xingyu Wu <xingyu.wu@starfivetech.com>
|
|
+M: Samin Guo <samin.guo@starfivetech.com>
|
|
+S: Supported
|
|
+F: Documentation/devicetree/bindings/watchdog/starfive*
|
|
+F: drivers/watchdog/starfive-wdt.c
|
|
+
|
|
STATIC BRANCH/CALL
|
|
M: Peter Zijlstra <peterz@infradead.org>
|
|
M: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
--- a/drivers/watchdog/Kconfig
|
|
+++ b/drivers/watchdog/Kconfig
|
|
@@ -1991,6 +1991,17 @@ config WATCHDOG_RTAS
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called wdrtas.
|
|
|
|
+# RISC-V Architecture
|
|
+
|
|
+config STARFIVE_WATCHDOG
|
|
+ tristate "StarFive Watchdog support"
|
|
+ depends on ARCH_STARFIVE || COMPILE_TEST
|
|
+ select WATCHDOG_CORE
|
|
+ default ARCH_STARFIVE
|
|
+ help
|
|
+ Say Y here to support the watchdog of StarFive JH7100 and JH7110
|
|
+ SoC. This driver can also be built as a module if choose M.
|
|
+
|
|
# S390 Architecture
|
|
|
|
config DIAG288_WATCHDOG
|
|
--- a/drivers/watchdog/Makefile
|
|
+++ b/drivers/watchdog/Makefile
|
|
@@ -191,6 +191,9 @@ obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.
|
|
obj-$(CONFIG_PSERIES_WDT) += pseries-wdt.o
|
|
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
|
|
|
|
+# RISC-V Architecture
|
|
+obj-$(CONFIG_STARFIVE_WATCHDOG) += starfive-wdt.o
|
|
+
|
|
# S390 Architecture
|
|
obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
|
|
|
|
--- /dev/null
|
|
+++ b/drivers/watchdog/starfive-wdt.c
|
|
@@ -0,0 +1,606 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Starfive Watchdog driver
|
|
+ *
|
|
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
|
|
+ */
|
|
+
|
|
+#include <linux/clk.h>
|
|
+#include <linux/iopoll.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of_device.h>
|
|
+#include <linux/pm_runtime.h>
|
|
+#include <linux/reset.h>
|
|
+#include <linux/watchdog.h>
|
|
+
|
|
+/* JH7100 Watchdog register define */
|
|
+#define STARFIVE_WDT_JH7100_INTSTAUS 0x000
|
|
+#define STARFIVE_WDT_JH7100_CONTROL 0x104
|
|
+#define STARFIVE_WDT_JH7100_LOAD 0x108
|
|
+#define STARFIVE_WDT_JH7100_EN 0x110
|
|
+#define STARFIVE_WDT_JH7100_RELOAD 0x114 /* Write 0 or 1 to reload preset value */
|
|
+#define STARFIVE_WDT_JH7100_VALUE 0x118
|
|
+#define STARFIVE_WDT_JH7100_INTCLR 0x120 /*
|
|
+ * [0]: Write 1 to clear interrupt
|
|
+ * [1]: 1 mean clearing and 0 mean complete
|
|
+ * [31:2]: reserved.
|
|
+ */
|
|
+#define STARFIVE_WDT_JH7100_LOCK 0x13c /* write 0x378f0765 to unlock */
|
|
+
|
|
+/* JH7110 Watchdog register define */
|
|
+#define STARFIVE_WDT_JH7110_LOAD 0x000
|
|
+#define STARFIVE_WDT_JH7110_VALUE 0x004
|
|
+#define STARFIVE_WDT_JH7110_CONTROL 0x008 /*
|
|
+ * [0]: reset enable;
|
|
+ * [1]: interrupt enable && watchdog enable
|
|
+ * [31:2]: reserved.
|
|
+ */
|
|
+#define STARFIVE_WDT_JH7110_INTCLR 0x00c /* clear intterupt and reload the counter */
|
|
+#define STARFIVE_WDT_JH7110_IMS 0x014
|
|
+#define STARFIVE_WDT_JH7110_LOCK 0xc00 /* write 0x1ACCE551 to unlock */
|
|
+
|
|
+/* WDOGCONTROL */
|
|
+#define STARFIVE_WDT_ENABLE 0x1
|
|
+#define STARFIVE_WDT_EN_SHIFT 0
|
|
+#define STARFIVE_WDT_RESET_EN 0x1
|
|
+#define STARFIVE_WDT_JH7100_RST_EN_SHIFT 0
|
|
+#define STARFIVE_WDT_JH7110_RST_EN_SHIFT 1
|
|
+
|
|
+/* WDOGLOCK */
|
|
+#define STARFIVE_WDT_JH7100_UNLOCK_KEY 0x378f0765
|
|
+#define STARFIVE_WDT_JH7110_UNLOCK_KEY 0x1acce551
|
|
+
|
|
+/* WDOGINTCLR */
|
|
+#define STARFIVE_WDT_INTCLR 0x1
|
|
+#define STARFIVE_WDT_JH7100_INTCLR_AVA_SHIFT 1 /* Watchdog can clear interrupt when 0 */
|
|
+
|
|
+#define STARFIVE_WDT_MAXCNT 0xffffffff
|
|
+#define STARFIVE_WDT_DEFAULT_TIME (15)
|
|
+#define STARFIVE_WDT_DELAY_US 0
|
|
+#define STARFIVE_WDT_TIMEOUT_US 10000
|
|
+
|
|
+/* module parameter */
|
|
+#define STARFIVE_WDT_EARLY_ENA 0
|
|
+
|
|
+static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
+static int heartbeat;
|
|
+static bool early_enable = STARFIVE_WDT_EARLY_ENA;
|
|
+
|
|
+module_param(heartbeat, int, 0);
|
|
+module_param(early_enable, bool, 0);
|
|
+module_param(nowayout, bool, 0);
|
|
+
|
|
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default="
|
|
+ __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");
|
|
+MODULE_PARM_DESC(early_enable,
|
|
+ "Watchdog is started at boot time if set to 1, default="
|
|
+ __MODULE_STRING(STARFIVE_WDT_EARLY_ENA));
|
|
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
+
|
|
+struct starfive_wdt_variant {
|
|
+ unsigned int control; /* Watchdog Control Resgister for reset enable */
|
|
+ unsigned int load; /* Watchdog Load register */
|
|
+ unsigned int reload; /* Watchdog Reload Control register */
|
|
+ unsigned int enable; /* Watchdog Enable Register */
|
|
+ unsigned int value; /* Watchdog Counter Value Register */
|
|
+ unsigned int int_clr; /* Watchdog Interrupt Clear Register */
|
|
+ unsigned int unlock; /* Watchdog Lock Register */
|
|
+ unsigned int int_status; /* Watchdog Interrupt Status Register */
|
|
+
|
|
+ u32 unlock_key;
|
|
+ char enrst_shift;
|
|
+ char en_shift;
|
|
+ bool intclr_check; /* whether need to check it before clearing interrupt */
|
|
+ char intclr_ava_shift;
|
|
+ bool double_timeout; /* The watchdog need twice timeout to reboot */
|
|
+};
|
|
+
|
|
+struct starfive_wdt {
|
|
+ struct watchdog_device wdd;
|
|
+ spinlock_t lock; /* spinlock for register handling */
|
|
+ void __iomem *base;
|
|
+ struct clk *core_clk;
|
|
+ struct clk *apb_clk;
|
|
+ const struct starfive_wdt_variant *variant;
|
|
+ unsigned long freq;
|
|
+ u32 count; /* count of timeout */
|
|
+ u32 reload; /* restore the count */
|
|
+};
|
|
+
|
|
+/* Register layout and configuration for the JH7100 */
|
|
+static const struct starfive_wdt_variant starfive_wdt_jh7100_variant = {
|
|
+ .control = STARFIVE_WDT_JH7100_CONTROL,
|
|
+ .load = STARFIVE_WDT_JH7100_LOAD,
|
|
+ .reload = STARFIVE_WDT_JH7100_RELOAD,
|
|
+ .enable = STARFIVE_WDT_JH7100_EN,
|
|
+ .value = STARFIVE_WDT_JH7100_VALUE,
|
|
+ .int_clr = STARFIVE_WDT_JH7100_INTCLR,
|
|
+ .unlock = STARFIVE_WDT_JH7100_LOCK,
|
|
+ .unlock_key = STARFIVE_WDT_JH7100_UNLOCK_KEY,
|
|
+ .int_status = STARFIVE_WDT_JH7100_INTSTAUS,
|
|
+ .enrst_shift = STARFIVE_WDT_JH7100_RST_EN_SHIFT,
|
|
+ .en_shift = STARFIVE_WDT_EN_SHIFT,
|
|
+ .intclr_check = true,
|
|
+ .intclr_ava_shift = STARFIVE_WDT_JH7100_INTCLR_AVA_SHIFT,
|
|
+ .double_timeout = false,
|
|
+};
|
|
+
|
|
+/* Register layout and configuration for the JH7110 */
|
|
+static const struct starfive_wdt_variant starfive_wdt_jh7110_variant = {
|
|
+ .control = STARFIVE_WDT_JH7110_CONTROL,
|
|
+ .load = STARFIVE_WDT_JH7110_LOAD,
|
|
+ .enable = STARFIVE_WDT_JH7110_CONTROL,
|
|
+ .value = STARFIVE_WDT_JH7110_VALUE,
|
|
+ .int_clr = STARFIVE_WDT_JH7110_INTCLR,
|
|
+ .unlock = STARFIVE_WDT_JH7110_LOCK,
|
|
+ .unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
|
|
+ .int_status = STARFIVE_WDT_JH7110_IMS,
|
|
+ .enrst_shift = STARFIVE_WDT_JH7110_RST_EN_SHIFT,
|
|
+ .en_shift = STARFIVE_WDT_EN_SHIFT,
|
|
+ .intclr_check = false,
|
|
+ .double_timeout = true,
|
|
+};
|
|
+
|
|
+static int starfive_wdt_enable_clock(struct starfive_wdt *wdt)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = clk_prepare_enable(wdt->apb_clk);
|
|
+ if (ret)
|
|
+ return dev_err_probe(wdt->wdd.parent, ret, "failed to enable apb clock\n");
|
|
+
|
|
+ ret = clk_prepare_enable(wdt->core_clk);
|
|
+ if (ret)
|
|
+ return dev_err_probe(wdt->wdd.parent, ret, "failed to enable core clock\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void starfive_wdt_disable_clock(struct starfive_wdt *wdt)
|
|
+{
|
|
+ clk_disable_unprepare(wdt->core_clk);
|
|
+ clk_disable_unprepare(wdt->apb_clk);
|
|
+}
|
|
+
|
|
+static inline int starfive_wdt_get_clock(struct starfive_wdt *wdt)
|
|
+{
|
|
+ struct device *dev = wdt->wdd.parent;
|
|
+
|
|
+ wdt->apb_clk = devm_clk_get(dev, "apb");
|
|
+ if (IS_ERR(wdt->apb_clk))
|
|
+ return dev_err_probe(dev, PTR_ERR(wdt->apb_clk), "failed to get apb clock\n");
|
|
+
|
|
+ wdt->core_clk = devm_clk_get(dev, "core");
|
|
+ if (IS_ERR(wdt->core_clk))
|
|
+ return dev_err_probe(dev, PTR_ERR(wdt->core_clk), "failed to get core clock\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static inline int starfive_wdt_reset_init(struct device *dev)
|
|
+{
|
|
+ struct reset_control *rsts;
|
|
+ int ret;
|
|
+
|
|
+ rsts = devm_reset_control_array_get_exclusive(dev);
|
|
+ if (IS_ERR(rsts))
|
|
+ return dev_err_probe(dev, PTR_ERR(rsts), "failed to get resets\n");
|
|
+
|
|
+ ret = reset_control_deassert(rsts);
|
|
+ if (ret)
|
|
+ return dev_err_probe(dev, ret, "failed to deassert resets\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static u32 starfive_wdt_ticks_to_sec(struct starfive_wdt *wdt, u32 ticks)
|
|
+{
|
|
+ return DIV_ROUND_CLOSEST(ticks, wdt->freq);
|
|
+}
|
|
+
|
|
+/* Write unlock-key to unlock. Write other value to lock. */
|
|
+static void starfive_wdt_unlock(struct starfive_wdt *wdt)
|
|
+{
|
|
+ spin_lock(&wdt->lock);
|
|
+ writel(wdt->variant->unlock_key, wdt->base + wdt->variant->unlock);
|
|
+}
|
|
+
|
|
+static void starfive_wdt_lock(struct starfive_wdt *wdt)
|
|
+{
|
|
+ writel(~wdt->variant->unlock_key, wdt->base + wdt->variant->unlock);
|
|
+ spin_unlock(&wdt->lock);
|
|
+}
|
|
+
|
|
+/* enable watchdog interrupt to reset/reboot */
|
|
+static void starfive_wdt_enable_reset(struct starfive_wdt *wdt)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ val = readl(wdt->base + wdt->variant->control);
|
|
+ val |= STARFIVE_WDT_RESET_EN << wdt->variant->enrst_shift;
|
|
+ writel(val, wdt->base + wdt->variant->control);
|
|
+}
|
|
+
|
|
+/* interrupt status whether has been raised from the counter */
|
|
+static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
|
|
+{
|
|
+ return !!readl(wdt->base + wdt->variant->int_status);
|
|
+}
|
|
+
|
|
+/* waiting interrupt can be free to clear */
|
|
+static int starfive_wdt_wait_int_free(struct starfive_wdt *wdt)
|
|
+{
|
|
+ u32 value;
|
|
+
|
|
+ return readl_poll_timeout_atomic(wdt->base + wdt->variant->int_clr, value,
|
|
+ !(value & BIT(wdt->variant->intclr_ava_shift)),
|
|
+ STARFIVE_WDT_DELAY_US, STARFIVE_WDT_TIMEOUT_US);
|
|
+}
|
|
+
|
|
+/* clear interrupt signal before initialization or reload */
|
|
+static int starfive_wdt_int_clr(struct starfive_wdt *wdt)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ if (wdt->variant->intclr_check) {
|
|
+ ret = starfive_wdt_wait_int_free(wdt);
|
|
+ if (ret)
|
|
+ return dev_err_probe(wdt->wdd.parent, ret,
|
|
+ "watchdog is not ready to clear interrupt.\n");
|
|
+ }
|
|
+ writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->variant->int_clr);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static inline void starfive_wdt_set_count(struct starfive_wdt *wdt, u32 val)
|
|
+{
|
|
+ writel(val, wdt->base + wdt->variant->load);
|
|
+}
|
|
+
|
|
+static inline u32 starfive_wdt_get_count(struct starfive_wdt *wdt)
|
|
+{
|
|
+ return readl(wdt->base + wdt->variant->value);
|
|
+}
|
|
+
|
|
+/* enable watchdog */
|
|
+static inline void starfive_wdt_enable(struct starfive_wdt *wdt)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ val = readl(wdt->base + wdt->variant->enable);
|
|
+ val |= STARFIVE_WDT_ENABLE << wdt->variant->en_shift;
|
|
+ writel(val, wdt->base + wdt->variant->enable);
|
|
+}
|
|
+
|
|
+/* disable watchdog */
|
|
+static inline void starfive_wdt_disable(struct starfive_wdt *wdt)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ val = readl(wdt->base + wdt->variant->enable);
|
|
+ val &= ~(STARFIVE_WDT_ENABLE << wdt->variant->en_shift);
|
|
+ writel(val, wdt->base + wdt->variant->enable);
|
|
+}
|
|
+
|
|
+static inline void starfive_wdt_set_reload_count(struct starfive_wdt *wdt, u32 count)
|
|
+{
|
|
+ starfive_wdt_set_count(wdt, count);
|
|
+
|
|
+ /* 7100 need set any value to reload register and could reload value to counter */
|
|
+ if (wdt->variant->reload)
|
|
+ writel(0x1, wdt->base + wdt->variant->reload);
|
|
+}
|
|
+
|
|
+static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
|
|
+{
|
|
+ if (wdt->variant->double_timeout)
|
|
+ return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, (wdt->freq / 2)) - 1;
|
|
+
|
|
+ return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, wdt->freq) - 1;
|
|
+}
|
|
+
|
|
+static unsigned int starfive_wdt_get_timeleft(struct watchdog_device *wdd)
|
|
+{
|
|
+ struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
+ u32 count;
|
|
+
|
|
+ /*
|
|
+ * If the watchdog takes twice timeout and set half count value,
|
|
+ * timeleft value should add the count value before first timeout.
|
|
+ */
|
|
+ count = starfive_wdt_get_count(wdt);
|
|
+ if (wdt->variant->double_timeout && !starfive_wdt_raise_irq_status(wdt))
|
|
+ count += wdt->count;
|
|
+
|
|
+ return starfive_wdt_ticks_to_sec(wdt, count);
|
|
+}
|
|
+
|
|
+static int starfive_wdt_keepalive(struct watchdog_device *wdd)
|
|
+{
|
|
+ struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
+ int ret;
|
|
+
|
|
+ starfive_wdt_unlock(wdt);
|
|
+ ret = starfive_wdt_int_clr(wdt);
|
|
+ if (ret)
|
|
+ goto exit;
|
|
+
|
|
+ starfive_wdt_set_reload_count(wdt, wdt->count);
|
|
+
|
|
+exit:
|
|
+ /* exit with releasing spinlock and locking registers */
|
|
+ starfive_wdt_lock(wdt);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int starfive_wdt_start(struct starfive_wdt *wdt)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ starfive_wdt_unlock(wdt);
|
|
+ /* disable watchdog, to be safe */
|
|
+ starfive_wdt_disable(wdt);
|
|
+
|
|
+ starfive_wdt_enable_reset(wdt);
|
|
+ ret = starfive_wdt_int_clr(wdt);
|
|
+ if (ret)
|
|
+ goto exit;
|
|
+
|
|
+ starfive_wdt_set_count(wdt, wdt->count);
|
|
+ starfive_wdt_enable(wdt);
|
|
+
|
|
+exit:
|
|
+ starfive_wdt_lock(wdt);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void starfive_wdt_stop(struct starfive_wdt *wdt)
|
|
+{
|
|
+ starfive_wdt_unlock(wdt);
|
|
+ starfive_wdt_disable(wdt);
|
|
+ starfive_wdt_lock(wdt);
|
|
+}
|
|
+
|
|
+static int starfive_wdt_pm_start(struct watchdog_device *wdd)
|
|
+{
|
|
+ struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
+ int ret = pm_runtime_get_sync(wdd->parent);
|
|
+
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ return starfive_wdt_start(wdt);
|
|
+}
|
|
+
|
|
+static int starfive_wdt_pm_stop(struct watchdog_device *wdd)
|
|
+{
|
|
+ struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
+
|
|
+ starfive_wdt_stop(wdt);
|
|
+ return pm_runtime_put_sync(wdd->parent);
|
|
+}
|
|
+
|
|
+static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
|
|
+ unsigned int timeout)
|
|
+{
|
|
+ struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
+ unsigned long count = timeout * wdt->freq;
|
|
+
|
|
+ /* some watchdogs take two timeouts to reset */
|
|
+ if (wdt->variant->double_timeout)
|
|
+ count /= 2;
|
|
+
|
|
+ wdt->count = count;
|
|
+ wdd->timeout = timeout;
|
|
+
|
|
+ starfive_wdt_unlock(wdt);
|
|
+ starfive_wdt_disable(wdt);
|
|
+ starfive_wdt_set_reload_count(wdt, wdt->count);
|
|
+ starfive_wdt_enable(wdt);
|
|
+ starfive_wdt_lock(wdt);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#define STARFIVE_WDT_OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
|
|
+
|
|
+static const struct watchdog_info starfive_wdt_info = {
|
|
+ .options = STARFIVE_WDT_OPTIONS,
|
|
+ .identity = "StarFive Watchdog",
|
|
+};
|
|
+
|
|
+static const struct watchdog_ops starfive_wdt_ops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .start = starfive_wdt_pm_start,
|
|
+ .stop = starfive_wdt_pm_stop,
|
|
+ .ping = starfive_wdt_keepalive,
|
|
+ .set_timeout = starfive_wdt_set_timeout,
|
|
+ .get_timeleft = starfive_wdt_get_timeleft,
|
|
+};
|
|
+
|
|
+static int starfive_wdt_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct starfive_wdt *wdt;
|
|
+ int ret;
|
|
+
|
|
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
|
|
+ if (!wdt)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ wdt->base = devm_platform_ioremap_resource(pdev, 0);
|
|
+ if (IS_ERR(wdt->base))
|
|
+ return dev_err_probe(&pdev->dev, PTR_ERR(wdt->base), "error mapping registers\n");
|
|
+
|
|
+ wdt->wdd.parent = &pdev->dev;
|
|
+ ret = starfive_wdt_get_clock(wdt);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ platform_set_drvdata(pdev, wdt);
|
|
+ pm_runtime_enable(&pdev->dev);
|
|
+ if (pm_runtime_enabled(&pdev->dev)) {
|
|
+ ret = pm_runtime_get_sync(&pdev->dev);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ } else {
|
|
+ /* runtime PM is disabled but clocks need to be enabled */
|
|
+ ret = starfive_wdt_enable_clock(wdt);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ ret = starfive_wdt_reset_init(&pdev->dev);
|
|
+ if (ret)
|
|
+ goto err_exit;
|
|
+
|
|
+ watchdog_set_drvdata(&wdt->wdd, wdt);
|
|
+ wdt->wdd.info = &starfive_wdt_info;
|
|
+ wdt->wdd.ops = &starfive_wdt_ops;
|
|
+ wdt->variant = of_device_get_match_data(&pdev->dev);
|
|
+ spin_lock_init(&wdt->lock);
|
|
+
|
|
+ wdt->freq = clk_get_rate(wdt->core_clk);
|
|
+ if (!wdt->freq) {
|
|
+ dev_err(&pdev->dev, "get clock rate failed.\n");
|
|
+ ret = -EINVAL;
|
|
+ goto err_exit;
|
|
+ }
|
|
+
|
|
+ wdt->wdd.min_timeout = 1;
|
|
+ wdt->wdd.max_timeout = starfive_wdt_max_timeout(wdt);
|
|
+ wdt->wdd.timeout = STARFIVE_WDT_DEFAULT_TIME;
|
|
+ watchdog_init_timeout(&wdt->wdd, heartbeat, &pdev->dev);
|
|
+ starfive_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout);
|
|
+
|
|
+ watchdog_set_nowayout(&wdt->wdd, nowayout);
|
|
+ watchdog_stop_on_reboot(&wdt->wdd);
|
|
+ watchdog_stop_on_unregister(&wdt->wdd);
|
|
+
|
|
+ if (early_enable) {
|
|
+ ret = starfive_wdt_start(wdt);
|
|
+ if (ret)
|
|
+ goto err_exit;
|
|
+ set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
|
|
+ } else {
|
|
+ starfive_wdt_stop(wdt);
|
|
+ }
|
|
+
|
|
+ ret = watchdog_register_device(&wdt->wdd);
|
|
+ if (ret)
|
|
+ goto err_exit;
|
|
+
|
|
+ if (!early_enable)
|
|
+ return pm_runtime_put_sync(&pdev->dev);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_exit:
|
|
+ starfive_wdt_disable_clock(wdt);
|
|
+ pm_runtime_disable(&pdev->dev);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int starfive_wdt_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct starfive_wdt *wdt = platform_get_drvdata(pdev);
|
|
+
|
|
+ starfive_wdt_stop(wdt);
|
|
+ watchdog_unregister_device(&wdt->wdd);
|
|
+
|
|
+ if (pm_runtime_enabled(&pdev->dev))
|
|
+ pm_runtime_disable(&pdev->dev);
|
|
+ else
|
|
+ /* disable clock without PM */
|
|
+ starfive_wdt_disable_clock(wdt);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void starfive_wdt_shutdown(struct platform_device *pdev)
|
|
+{
|
|
+ struct starfive_wdt *wdt = platform_get_drvdata(pdev);
|
|
+
|
|
+ starfive_wdt_pm_stop(&wdt->wdd);
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM_SLEEP
|
|
+static int starfive_wdt_suspend(struct device *dev)
|
|
+{
|
|
+ struct starfive_wdt *wdt = dev_get_drvdata(dev);
|
|
+
|
|
+ /* Save watchdog state, and turn it off. */
|
|
+ wdt->reload = starfive_wdt_get_count(wdt);
|
|
+
|
|
+ /* Note that WTCNT doesn't need to be saved. */
|
|
+ starfive_wdt_stop(wdt);
|
|
+
|
|
+ return pm_runtime_force_suspend(dev);
|
|
+}
|
|
+
|
|
+static int starfive_wdt_resume(struct device *dev)
|
|
+{
|
|
+ struct starfive_wdt *wdt = dev_get_drvdata(dev);
|
|
+ int ret;
|
|
+
|
|
+ ret = pm_runtime_force_resume(dev);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ starfive_wdt_unlock(wdt);
|
|
+ /* Restore watchdog state. */
|
|
+ starfive_wdt_set_reload_count(wdt, wdt->reload);
|
|
+ starfive_wdt_lock(wdt);
|
|
+
|
|
+ return starfive_wdt_start(wdt);
|
|
+}
|
|
+#endif /* CONFIG_PM_SLEEP */
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+static int starfive_wdt_runtime_suspend(struct device *dev)
|
|
+{
|
|
+ struct starfive_wdt *wdt = dev_get_drvdata(dev);
|
|
+
|
|
+ starfive_wdt_disable_clock(wdt);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int starfive_wdt_runtime_resume(struct device *dev)
|
|
+{
|
|
+ struct starfive_wdt *wdt = dev_get_drvdata(dev);
|
|
+
|
|
+ return starfive_wdt_enable_clock(wdt);
|
|
+}
|
|
+#endif /* CONFIG_PM */
|
|
+
|
|
+static const struct dev_pm_ops starfive_wdt_pm_ops = {
|
|
+ SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
|
|
+ SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
|
|
+};
|
|
+
|
|
+static const struct of_device_id starfive_wdt_match[] = {
|
|
+ { .compatible = "starfive,jh7100-wdt", .data = &starfive_wdt_jh7100_variant },
|
|
+ { .compatible = "starfive,jh7110-wdt", .data = &starfive_wdt_jh7110_variant },
|
|
+ { /* sentinel */ }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, starfive_wdt_match);
|
|
+
|
|
+static struct platform_driver starfive_wdt_driver = {
|
|
+ .probe = starfive_wdt_probe,
|
|
+ .remove = starfive_wdt_remove,
|
|
+ .shutdown = starfive_wdt_shutdown,
|
|
+ .driver = {
|
|
+ .name = "starfive-wdt",
|
|
+ .pm = &starfive_wdt_pm_ops,
|
|
+ .of_match_table = of_match_ptr(starfive_wdt_match),
|
|
+ },
|
|
+};
|
|
+module_platform_driver(starfive_wdt_driver);
|
|
+
|
|
+MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
|
|
+MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");
|
|
+MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
|
|
+MODULE_LICENSE("GPL");
|