mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
3f889418a5
There are two types of swapping the EEPROM data in the ath9k driver.
Before this series one type of swapping could not be used without the
other.
The first type of swapping looks at the "magic bytes" at the start of
the EEPROM data and performs swab16 on the EEPROM contents if needed.
The second type of swapping is EEPROM format specific and swaps
specific fields within the EEPROM itself (swab16, swab32 - depends on
the EEPROM format).
With this series the second part now looks at the EEPMISC register
inside the EEPROM, which uses a bit to indicate if the EEPROM data
is Big Endian (this is also done by the FreeBSD kernel).
This has a nice advantage: currently there are some out-of-tree hacks
(in OpenWrt and LEDE) where the EEPROM has a Big Endian header on a
Big Endian system (= no swab16 is performed) but the EEPROM itself
indicates that it's data is Little Endian. Until now the out-of-tree
code simply did a swab16 before passing the data to ath9k, so ath9k
first did the swab16 - this also enabled the format specific swapping.
These out-of-tree hacks are still working with the new logic, but it
is recommended to remove them. This implementation is based on a
discussion with Arnd Bergmann who raised concerns about the
robustness and portability of the swapping logic in the original OF
support patch review, see [0].
After a second round of patches (= v1 of this series) neither Arnd
Bergmann nor I were really happy with the complexity of the EEPROM
swapping logic. Based on a discussion (see [1] and [2]) we decided
that ath9k should use a defined format (specifying the endianness
of the data - I went with __le16 and __le32) when accessing the
EEPROM fields. A benefit of this is that we enable the EEPMISC based
swapping logic by default, just like the FreeBSD driver, see [3]. On
the devices which I have tested (see below) ath9k now works without
having to specify the "endian_check" field in ath9k_platform_data (or
a similar logic which could provide this via devicetree) as ath9k now
detects the endianness automatically. Only EEPROMs which are mangled
by some out-of-tree code still need the endian_check flag (or one can
simply remove that mangling from the out-of-tree code).
[0] http://www.spinics.net/lists/linux-wireless/msg152634.html
[1] https://marc.info/?l=linux-wireless&m=147250597503174&w=2
[2] https://marc.info/?l=linux-wireless&m=147254388611344&w=2
[3] 50719b56d9/sys/dev/ath/ath_hal/ah_eeprom_9287.c (L351)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
118 lines
4.5 KiB
Diff
118 lines
4.5 KiB
Diff
From e8f60fa28e619ad238457ac84fb292541be180d3 Mon Sep 17 00:00:00 2001
|
|
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
Date: Mon, 3 Oct 2016 00:29:09 +0200
|
|
Subject: [v2 PATCH 3/7] ath9k: Add an eeprom_ops callback for retrieving the
|
|
eepmisc value
|
|
|
|
This allows deciding if we have to swap the EEPROM data (so it matches
|
|
the system's native endianness) even if no byte-swapping (swab16, based on
|
|
the first two bytes in the EEPROM) is needed.
|
|
|
|
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
---
|
|
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 +++++++-
|
|
drivers/net/wireless/ath/ath9k/eeprom.h | 1 +
|
|
drivers/net/wireless/ath/ath9k/eeprom_4k.c | 8 +++++++-
|
|
drivers/net/wireless/ath/ath9k/eeprom_9287.c | 8 +++++++-
|
|
drivers/net/wireless/ath/ath9k/eeprom_def.c | 8 +++++++-
|
|
5 files changed, 29 insertions(+), 4 deletions(-)
|
|
|
|
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
|
|
@@ -5498,6 +5498,11 @@ unsigned int ar9003_get_paprd_scale_fact
|
|
}
|
|
}
|
|
|
|
+static u8 ar9003_get_eepmisc(struct ath_hw *ah)
|
|
+{
|
|
+ return ah->eeprom.map4k.baseEepHeader.eepMisc;
|
|
+}
|
|
+
|
|
const struct eeprom_ops eep_ar9300_ops = {
|
|
.check_eeprom = ath9k_hw_ar9300_check_eeprom,
|
|
.get_eeprom = ath9k_hw_ar9300_get_eeprom,
|
|
@@ -5508,5 +5513,6 @@ const struct eeprom_ops eep_ar9300_ops =
|
|
.set_board_values = ath9k_hw_ar9300_set_board_values,
|
|
.set_addac = ath9k_hw_ar9300_set_addac,
|
|
.set_txpower = ath9k_hw_ar9300_set_txpower,
|
|
- .get_spur_channel = ath9k_hw_ar9300_get_spur_channel
|
|
+ .get_spur_channel = ath9k_hw_ar9300_get_spur_channel,
|
|
+ .get_eepmisc = ar9003_get_eepmisc
|
|
};
|
|
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
|
|
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
|
|
@@ -655,6 +655,7 @@ struct eeprom_ops {
|
|
u16 cfgCtl, u8 twiceAntennaReduction,
|
|
u8 powerLimit, bool test);
|
|
u16 (*get_spur_channel)(struct ath_hw *ah, u16 i, bool is2GHz);
|
|
+ u8 (*get_eepmisc)(struct ath_hw *ah);
|
|
};
|
|
|
|
void ath9k_hw_analog_shift_regwrite(struct ath_hw *ah, u32 reg, u32 val);
|
|
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
|
@@ -1064,6 +1064,11 @@ static u16 ath9k_hw_4k_get_spur_channel(
|
|
return ah->eeprom.map4k.modalHeader.spurChans[i].spurChan;
|
|
}
|
|
|
|
+static u8 ath9k_hw_4k_get_eepmisc(struct ath_hw *ah)
|
|
+{
|
|
+ return ah->eeprom.map4k.baseEepHeader.eepMisc;
|
|
+}
|
|
+
|
|
const struct eeprom_ops eep_4k_ops = {
|
|
.check_eeprom = ath9k_hw_4k_check_eeprom,
|
|
.get_eeprom = ath9k_hw_4k_get_eeprom,
|
|
@@ -1073,5 +1078,6 @@ const struct eeprom_ops eep_4k_ops = {
|
|
.get_eeprom_rev = ath9k_hw_4k_get_eeprom_rev,
|
|
.set_board_values = ath9k_hw_4k_set_board_values,
|
|
.set_txpower = ath9k_hw_4k_set_txpower,
|
|
- .get_spur_channel = ath9k_hw_4k_get_spur_channel
|
|
+ .get_spur_channel = ath9k_hw_4k_get_spur_channel,
|
|
+ .get_eepmisc = ath9k_hw_4k_get_eepmisc
|
|
};
|
|
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
|
|
@@ -986,6 +986,11 @@ static u16 ath9k_hw_ar9287_get_spur_chan
|
|
return ah->eeprom.map9287.modalHeader.spurChans[i].spurChan;
|
|
}
|
|
|
|
+static u8 ath9k_hw_ar9287_get_eepmisc(struct ath_hw *ah)
|
|
+{
|
|
+ return ah->eeprom.map9287.baseEepHeader.eepMisc;
|
|
+}
|
|
+
|
|
const struct eeprom_ops eep_ar9287_ops = {
|
|
.check_eeprom = ath9k_hw_ar9287_check_eeprom,
|
|
.get_eeprom = ath9k_hw_ar9287_get_eeprom,
|
|
@@ -995,5 +1000,6 @@ const struct eeprom_ops eep_ar9287_ops =
|
|
.get_eeprom_rev = ath9k_hw_ar9287_get_eeprom_rev,
|
|
.set_board_values = ath9k_hw_ar9287_set_board_values,
|
|
.set_txpower = ath9k_hw_ar9287_set_txpower,
|
|
- .get_spur_channel = ath9k_hw_ar9287_get_spur_channel
|
|
+ .get_spur_channel = ath9k_hw_ar9287_get_spur_channel,
|
|
+ .get_eepmisc = ath9k_hw_ar9287_get_eepmisc
|
|
};
|
|
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
|
|
@@ -1317,6 +1317,11 @@ static u16 ath9k_hw_def_get_spur_channel
|
|
return ah->eeprom.def.modalHeader[is2GHz].spurChans[i].spurChan;
|
|
}
|
|
|
|
+static u8 ath9k_hw_def_get_eepmisc(struct ath_hw *ah)
|
|
+{
|
|
+ return ah->eeprom.def.baseEepHeader.eepMisc;
|
|
+}
|
|
+
|
|
const struct eeprom_ops eep_def_ops = {
|
|
.check_eeprom = ath9k_hw_def_check_eeprom,
|
|
.get_eeprom = ath9k_hw_def_get_eeprom,
|
|
@@ -1327,5 +1332,6 @@ const struct eeprom_ops eep_def_ops = {
|
|
.set_board_values = ath9k_hw_def_set_board_values,
|
|
.set_addac = ath9k_hw_def_set_addac,
|
|
.set_txpower = ath9k_hw_def_set_txpower,
|
|
- .get_spur_channel = ath9k_hw_def_get_spur_channel
|
|
+ .get_spur_channel = ath9k_hw_def_get_spur_channel,
|
|
+ .get_eepmisc = ath9k_hw_def_get_eepmisc
|
|
};
|