openwrt/target/linux/ath79/dts/ar7242_tl-wr2543-v1.dts
Chuanhong Guo c463320812 ath79: Remove all memory nodes defined in dts
This target can automatically detect the correct memory size and we've
been using it for long in ar71xx.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-06-28 18:39:57 +02:00

182 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
model = "TP-LINK TL-WR2543N/ND";
aliases {
led-status = &system;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
gpio-keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: wps {
label = "tplink:green:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
usb {
label = "tplink:green:usb";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "tplink:green:wlan2g";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "tplink:green:wlan5g";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
rtl8367 {
compatible = "realtek,rtl8367";
gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7d0000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&usb {
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0 {
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
mtd-mac-address = <&uboot 0x1fc00>;
phy-handle = <&phy0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};