mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
fce21ae4cc
Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
64 lines
3.5 KiB
Diff
64 lines
3.5 KiB
Diff
From e4edca57f8db4d03ad4dc82dd6761c0142ab310d Mon Sep 17 00:00:00 2001
|
|
From: popcornmix <popcornmix@gmail.com>
|
|
Date: Mon, 25 Jan 2016 17:25:12 +0000
|
|
Subject: [PATCH] firmware: Updated mailbox header
|
|
|
|
---
|
|
include/soc/bcm2835/raspberrypi-firmware.h | 11 +++++++++++
|
|
1 file changed, 11 insertions(+)
|
|
|
|
--- a/include/soc/bcm2835/raspberrypi-firmware.h
|
|
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
|
|
@@ -63,6 +63,7 @@ enum rpi_firmware_property_tag {
|
|
RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008,
|
|
RPI_FIRMWARE_GET_TURBO = 0x00030009,
|
|
RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a,
|
|
+ RPI_FIRMWARE_GET_STC = 0x0003000b,
|
|
RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c,
|
|
RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d,
|
|
RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e,
|
|
@@ -72,12 +73,15 @@ enum rpi_firmware_property_tag {
|
|
RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012,
|
|
RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
|
|
RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020,
|
|
+ RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021,
|
|
RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030,
|
|
RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
|
|
RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
|
|
RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
|
|
RPI_FIRMWARE_SET_TURBO = 0x00038009,
|
|
+ RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021,
|
|
RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030,
|
|
+ RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042,
|
|
|
|
/* Dispmanx TAGS */
|
|
RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,
|
|
@@ -91,6 +95,8 @@ enum rpi_firmware_property_tag {
|
|
RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009,
|
|
RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a,
|
|
RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b,
|
|
+ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f,
|
|
+ RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010,
|
|
RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001,
|
|
RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
|
|
RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
|
|
@@ -100,6 +106,7 @@ enum rpi_firmware_property_tag {
|
|
RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009,
|
|
RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a,
|
|
RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b,
|
|
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e,
|
|
RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003,
|
|
RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004,
|
|
RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005,
|
|
@@ -108,6 +115,10 @@ enum rpi_firmware_property_tag {
|
|
RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009,
|
|
RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a,
|
|
RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b,
|
|
+ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e,
|
|
+ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f,
|
|
+
|
|
+ RPI_FIRMWARE_VCHIQ_INIT = 0x00048010,
|
|
|
|
RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001,
|
|
RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001,
|