openwrt/target/linux/ramips/image
Luis Mita 7be58ccacc ramips: mt76x8: add support for Cudy TR1200 v1
Hardware:
 - SoC: MediaTek MT7628AN (MIPS 580MHz)
 - Flash: 16 MiB XMC 25QH128CH10
 - RAM: 128 MiB ESMT M14D1G1664A
 - WLAN: 2.4 GHz (MT7628), 5 GHz (MT7613BEN 802.11ac)
 - Ethernet: 1x 10/100 Mbps WAN, 1x 10/100 LAN (MT7628)
 - USB 2.0 port
 - Buttons: 1 Reset button, 1 slider button
 - LEDs: 1x Red, 1x White
 - Serial console: unpopulated header, 115200 8n1
 - Power: 5 VDC, 2 A

MAC addresses:
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| WAN     | 80:af:ca:xx:xx:x0 | label     |
| LAN     | 80:af:ca:xx:xx:x0 | label     |
| WLAN 2g | 80:af:ca:xx:xx:x0 | label     |
| WLAN 5g | 80:af:ca:xx:xx:x2 | label+2   |
+---------+-------------------+-----------+

Installation:
The installation must be done via TFTP by disassembling the router.
On other occasions Cudy has distributed intermediate firmware to make
installation easier, and so I recommend checking the Wiki for this
device if there is a more convenient solution than the one below.

To install using TFTP:
1. Upgrade to a beta firmware (signed by Cudy) that can be downloaded
from the wiki. This is required in order to use an unlocked u-boot.
2. Connect to UART.
3. While the router is turning on, press 1.
4. Connect to LAN and set your IP to 192.168.1.88/24. Configure a TFTP
server and an OpenWrt initramfs-kernel.bin firmware file as recovery.bin.
5. Press Enter three times. Verify the filename.
6. If you can reach LuCI or SSH now, just use the sysupgrade image with
the 'Keep settings' option turned off.

If you don't want to use the beta firmware nor the unlocked u-boot, you
can install the firmware writing the sysupgrade image on the firmware
partition of the SPI flash.

Signed-off-by: Luis Mita <luis@luismita.com>
(cherry picked from commit f1091ef7ac)
Link: https://github.com/openwrt/openwrt/pull/15875
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-07 23:53:30 +02:00
..
lzma-loader ramips: lzma-loader: use default uart for rt305x 2024-01-05 23:32:59 +01:00
common-sercomm.mk ramips: add support for Sercomm CPJ routers 2023-11-27 02:02:35 +01:00
common-tp-link.mk ramips: add basic support for TP-Link EC330-G5u v1 2023-01-14 18:36:33 +01:00
Makefile image: add additional fields to Netgear encrypted image 2023-07-13 12:05:28 +01:00
mt76x8.mk ramips: mt76x8: add support for Cudy TR1200 v1 2024-07-07 23:53:30 +02:00
mt7620.mk ramips: add support for Sercomm CPJ routers 2023-11-27 02:02:35 +01:00
mt7621.mk ramips: add support for Z-ROUTER ZR-2660 2024-03-15 23:24:13 +01:00
rt288x.mk treewide: Disable building 32M RAM devices 2023-05-21 01:08:22 +02:00
rt305x.mk treewide: Disable building 32M RAM devices 2023-05-21 01:08:22 +02:00
rt3883.mk treewide: Disable building 32M RAM devices 2023-05-21 01:08:22 +02:00