openwrt/target/linux
J. Scott Heppler 24b74fd3f9 ramips: add support for Linksys EA7300 v2
This submission relied heavily on the work of
Santiago Rodriguez-Papa <contact at rodsan.dev>

Specifications:

*  SoC:            MediaTek  MT7621A            (880  MHz  2c/4t)
*  RAM:            Winbond W632GG6MB-12         (256M  DDR3-1600)
*  Flash:          Winbond W29N01HVSINA         (128M  NAND)
*  Eth:            MediaTek  MT7621A            (10/100/1000  Mbps  x5)
*  Radio:          MT7603E/MT7615N              (2.4  GHz  &  5  GHz)
                     4  antennae:  1  internal  and  3  non-deatachable
*  USB:            3.0  (x1)
*  LEDs:
          White    (x1  logo)
          Green    (x6  eth  +  wps)
          Orange   (x5,  hardware-bound)
*  Buttons:
          Reset    (x1)
          WPS      (x1)

Installation:

Flash factory image through GUI.

This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.

Reverting to factory firmware:

Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.

Signed-off-by: J. Scott Heppler <shep971@centurylink.net>
Signed-off-by: maurerr <mariusd84@gmail.com>
2021-09-01 08:07:01 +00:00
..
apm821xx treewide: remove empty default cases 2021-09-01 08:07:00 +00:00
arc770 arc770: drop support for kernel 4.14 2021-09-01 08:06:56 +00:00
archs38 treewide: use wpad-basic-wolfssl as default 2021-09-01 08:06:52 +00:00
armvirt kernel: set WATCHDOG_CORE dependency in kmod-hwmon-sch5627 2021-09-01 08:06:53 +00:00
at91 at91: explicitly set CONFIG_USB_SUPPORT for sam9x subtarget 2021-09-01 08:06:54 +00:00
ath25 ath25: fix preinit Ethernet port configuration 2021-09-01 08:06:58 +00:00
ath79 target: update SPDX license names 2021-09-01 08:07:01 +00:00
bcm27xx kernel: bump 5.4 to 5.4.66 2021-09-01 08:07:00 +00:00
bcm47xx kernel: bump 5.4 to 5.4.64 2021-09-01 08:06:58 +00:00
bcm53xx treewide: use wpad-basic-wolfssl as default 2021-09-01 08:06:52 +00:00
bcm63xx target: update SPDX license names 2021-09-01 08:07:01 +00:00
gemini gemini: Add swap partition to DNS-313 2020-07-31 18:34:40 +02:00
generic kernel: fix mtd partition erase < parent_erasesize writes 2021-09-01 08:07:00 +00:00
imx6 kernel: unify CONFIG_GPIO_SYSFS in kernel configs 2020-08-06 12:37:04 +02:00
ipq40xx target: update SPDX license names 2021-09-01 08:07:01 +00:00
ipq806x ipq806x: fix support of Edgecore ECW5410 support 2021-09-01 08:07:00 +00:00
ipq807x kernel: unify CONFIG_GPIO_SYSFS in kernel configs 2020-08-06 12:37:04 +02:00
kirkwood target: update SPDX license names 2021-09-01 08:07:01 +00:00
lantiq lantiq: use uniform "u-boot-env" mtd label 2021-09-01 08:07:00 +00:00
layerscape kernel: bump 5.4 to 5.4.66 2021-09-01 08:07:00 +00:00
malta kernel: set WATCHDOG_CORE dependency in kmod-hwmon-sch5627 2021-09-01 08:06:53 +00:00
mediatek target: update SPDX license names 2021-09-01 08:07:01 +00:00
mpc85xx target: update SPDX license names 2021-09-01 08:07:01 +00:00
mvebu target: update SPDX license names 2021-09-01 08:07:01 +00:00
mxs treewide: make dependency on kmod-usb-net selective 2021-09-01 08:06:49 +00:00
octeon octeon: add support for Itus Shield Router 2021-09-01 08:06:51 +00:00
octeontx kernel: bump 5.4 to 5.4.60 2021-09-01 08:06:53 +00:00
omap treewide: use wpad-basic-wolfssl as default 2021-09-01 08:06:52 +00:00
oxnas target: update SPDX license names 2021-09-01 08:07:01 +00:00
pistachio pistachio: drop support for kernel 4.14 2021-09-01 08:06:56 +00:00
ramips ramips: add support for Linksys EA7300 v2 2021-09-01 08:07:01 +00:00
rockchip kernel: bump 5.4 to 5.4.58 2021-09-01 08:06:51 +00:00
rtl838x target: update SPDX license names 2021-09-01 08:07:01 +00:00
sunxi treewide: use wpad-basic-wolfssl as default 2021-09-01 08:06:52 +00:00
tegra treewide: use wpad-basic-wolfssl as default 2021-09-01 08:06:52 +00:00
uml uml: update to linux 5.4 2021-09-01 08:06:52 +00:00
x86 kernel: bump 5.4 to 5.4.63 2021-09-01 08:06:57 +00:00
zynq kernel: unify CONFIG_GPIO_SYSFS in kernel configs 2020-08-06 12:37:04 +02:00
Makefile build: add 'make kernel_xconfig' command 2020-07-08 16:07:05 +02:00