Felix Fietkau 3f8a426056 lantiq: Configure the PCIe reset GPIO using OF ... After the latest pinctrl backports there are only 50 (instead of 56 as before) GPIOs/pins exported (thus the first GPIO on VRX200 SoCs is now 462, before it was 456). This means that any hardcoded GPIOs have to be adjusted. This broke the PCIe driver (which seems to be the only driver which uses hardcoded GPIO numbers), it only reports: ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout pcie_rc_initialize link up failed!!!!! To prevent more of these issues in the future we remove the hardcoded PCIe reset GPIO definition and simply pass it via device-tree (like the PCI driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48285		2016-01-17 19:55:10 +00:00
..
base-files	lantiq: match default xdsl mode and default wan interface	2016-01-01 21:19:32 +00:00
dts	lantiq: Configure the PCIe reset GPIO using OF	2016-01-17 19:55:10 +00:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: Fixed brnImage signature for the VGV7510KW22BRN images	2016-01-17 10:47:10 +00:00
patches-4.1	lantiq: Configure the PCIe reset GPIO using OF	2016-01-17 19:55:10 +00:00
xrx200	lantiq: get rid of ltq-vdsl-fw	2015-12-11 15:05:40 +00:00
xway	lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. loading vr9 drivers	2015-12-04 17:42:51 +00:00
base-files.mk	lantiq: add runtime generation of /etc/config/network	2011-11-15 18:21:00 +00:00
config-4.1	lantiq: Switch to the generic mtdsplit parser implementations	2016-01-17 10:41:46 +00:00
Makefile	lantiq: make v4.1 the default kernel	2015-10-05 10:28:26 +00:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00