openwrt/target/linux/bcm27xx/patches-5.4/950-0560-drm-vc4-crtc-Enable-and-disable-the-PV-in-atomic_ena.patch
Álvaro Fernández Rojas 77e97abf12 bcm27xx: update to latest patches from RPi foundation
Also removes random module and switches to new bcm2711 thermal driver.
Boot tested on RPi 4B v1.1 4G.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-28 19:12:43 +02:00

56 lines
2.0 KiB
Diff

From 7bbbfef1c98e832cbd55e66ac2d7f13ec0a2b11e Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Fri, 21 Feb 2020 14:34:31 +0100
Subject: [PATCH] drm/vc4: crtc: Enable and disable the PV in
atomic_enable / disable
The VIDEN bit in the pixelvalve currently being used to enable or disable
the pixelvalve seems to not be enough in some situations, which whill end
up with the pixelvalve stalling.
In such a case, even re-enabling VIDEN doesn't bring it back and we need to
clear the FIFO. This can only be done if the pixelvalve is disabled though.
In order to overcome this, we can configure the pixelvalve during
mode_set_no_fb, but only enable it in atomic_enable and flush the FIFO
there, and in atomic_disable disable the pixelvalve again.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -374,9 +374,7 @@ static void vc4_crtc_config_pv(struct dr
PV_CONTROL_TRIGGER_UNDERFLOW |
PV_CONTROL_WAIT_HSTART |
VC4_SET_FIELD(vc4_encoder->clock_select,
- PV_CONTROL_CLK_SELECT) |
- PV_CONTROL_FIFO_CLR |
- PV_CONTROL_EN);
+ PV_CONTROL_CLK_SELECT));
}
static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
@@ -467,6 +465,8 @@ static void vc4_crtc_atomic_disable(stru
ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1);
WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n");
+ CRTC_WRITE(PV_CONTROL, CRTC_READ(PV_CONTROL) & ~PV_CONTROL_EN);
+
if (HVS_READ(SCALER_DISPCTRLX(chan)) &
SCALER_DISPCTRLX_ENABLE) {
HVS_WRITE(SCALER_DISPCTRLX(chan),
@@ -554,6 +554,10 @@ static void vc4_crtc_atomic_enable(struc
require_hvs_enabled(dev);
+ /* Reset the PV fifo. */
+ CRTC_WRITE(PV_CONTROL, CRTC_READ(PV_CONTROL) |
+ PV_CONTROL_FIFO_CLR | PV_CONTROL_EN);
+
/* Enable vblank irq handling before crtc is started otherwise
* drm_crtc_get_vblank() fails in vc4_crtc_update_dlist().
*/