mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
77e97abf12
Also removes random module and switches to new bcm2711 thermal driver. Boot tested on RPi 4B v1.1 4G. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
46 lines
1.9 KiB
Diff
46 lines
1.9 KiB
Diff
From e253d03936265dc4ab8ae9ae89d2a885e80a45a6 Mon Sep 17 00:00:00 2001
|
|
From: Matthias Reichl <hias@horus.com>
|
|
Date: Fri, 6 Mar 2020 11:08:10 +0100
|
|
Subject: [PATCH] gpio-ir-overlay: add parameter to configure signal
|
|
polarity (#3490)
|
|
|
|
Standard IR receivers use inverted / active-low signalling
|
|
and the gpio-ir overlay configures the GPIO appropriately
|
|
as GPIO_ACTIVE_LOW (1).
|
|
|
|
In order to support (rather rare) non-inverted / active-high
|
|
signalling the GPIO needs to be configured as GPIO_ACTIVE_HIGH (0).
|
|
|
|
Add an "invert" parameter to override this like in the gpio-ir-tx
|
|
overlay.
|
|
|
|
Signed-off-by: Matthias Reichl <hias@horus.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 4 ++++
|
|
arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 1 +
|
|
2 files changed, 5 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -754,6 +754,10 @@ Params: gpio_pin Input pi
|
|
gpio_pull Desired pull-up/down state (off, down, up)
|
|
Default is "up".
|
|
|
|
+ invert "1" = invert the input (active-low signalling).
|
|
+ "0" = non-inverted input (active-high
|
|
+ signalling). Default is "1".
|
|
+
|
|
rc-map-name Default rc keymap (can also be changed by
|
|
ir-keytable), defaults to "rc-rc6-mce"
|
|
|
|
--- a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts
|
|
@@ -42,6 +42,7 @@
|
|
<&gpio_ir_pins>,"brcm,pins:0",
|
|
<&gpio_ir_pins>,"reg:0";
|
|
gpio_pull = <&gpio_ir_pins>,"brcm,pull:0"; // pull-up/down state
|
|
+ invert = <&gpio_ir>,"gpios:8"; // 0 = active high input
|
|
|
|
rc-map-name = <&gpio_ir>,"linux,rc-map-name"; // default rc map
|
|
};
|