mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
77e97abf12
Also removes random module and switches to new bcm2711 thermal driver. Boot tested on RPi 4B v1.1 4G. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
163 lines
3.5 KiB
Diff
163 lines
3.5 KiB
Diff
From 3c099a50b3d609206a86896405cfdc8a94cd7aa4 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Wed, 29 Jan 2020 11:29:06 +0000
|
|
Subject: [PATCH] ARM: dts: Remove bcm2838-rpi-4-b.dts
|
|
|
|
Upstream are not going to use the bcm2838 identifier, so begin the
|
|
cleanup by removing the suggested upstream Pi 4 .dts file.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 -
|
|
arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 134 --------------------------
|
|
2 files changed, 135 deletions(-)
|
|
delete mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -97,7 +97,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
|
|
bcm2837-rpi-3-b.dtb \
|
|
bcm2837-rpi-3-b-plus.dtb \
|
|
bcm2837-rpi-cm3-io3.dtb \
|
|
- bcm2838-rpi-4-b.dtb \
|
|
bcm2835-rpi-zero.dtb \
|
|
bcm2835-rpi-zero-w.dtb
|
|
dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
|
--- a/arch/arm/boot/dts/bcm2838-rpi-4-b.dts
|
|
+++ /dev/null
|
|
@@ -1,134 +0,0 @@
|
|
-// SPDX-License-Identifier: GPL-2.0
|
|
-/dts-v1/;
|
|
-#include "bcm2838.dtsi"
|
|
-#include "bcm2835-rpi.dtsi"
|
|
-#include "bcm2838-rpi.dtsi"
|
|
-
|
|
-/ {
|
|
- compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
|
|
- model = "Raspberry Pi 4 Model B";
|
|
-
|
|
- chosen {
|
|
- /* 8250 auxiliary UART instead of pl011 */
|
|
- stdout-path = "serial1:115200n8";
|
|
- };
|
|
-
|
|
- memory@0 {
|
|
- device_type = "memory";
|
|
- reg = <0x0 0x0 0x0>;
|
|
- };
|
|
-
|
|
- leds {
|
|
- act {
|
|
- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
|
- };
|
|
-
|
|
- pwr {
|
|
- label = "PWR";
|
|
- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
|
- };
|
|
- };
|
|
-
|
|
- wifi_pwrseq: wifi-pwrseq {
|
|
- compatible = "mmc-pwrseq-simple";
|
|
- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
|
|
- };
|
|
-
|
|
- sd_io_1v8_reg: sd_io_1v8_reg {
|
|
- status = "okay";
|
|
- compatible = "regulator-gpio";
|
|
- vin-supply = <&vdd_5v0_reg>;
|
|
- regulator-name = "vdd-sd-io";
|
|
- regulator-min-microvolt = <1800000>;
|
|
- regulator-max-microvolt = <3300000>;
|
|
- regulator-boot-on;
|
|
- regulator-always-on;
|
|
- regulator-settling-time-us = <5000>;
|
|
-
|
|
- gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
|
|
- states = <1800000 0x1
|
|
- 3300000 0x0>;
|
|
- };
|
|
-};
|
|
-
|
|
-&firmware {
|
|
- expgpio: gpio {
|
|
- compatible = "raspberrypi,firmware-gpio";
|
|
- gpio-controller;
|
|
- #gpio-cells = <2>;
|
|
- gpio-line-names = "BT_ON",
|
|
- "WL_ON",
|
|
- "PWR_LED_OFF",
|
|
- "GLOBAL_RESET",
|
|
- "VDD_SD_IO_SEL",
|
|
- "CAM_GPIO",
|
|
- "",
|
|
- "";
|
|
- status = "okay";
|
|
- };
|
|
-};
|
|
-
|
|
-&pwm1 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-/* SDHCI is used to control the SDIO for wireless */
|
|
-&sdhci {
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&emmc_gpio34>;
|
|
- status = "okay";
|
|
- bus-width = <4>;
|
|
- non-removable;
|
|
- mmc-pwrseq = <&wifi_pwrseq>;
|
|
-
|
|
- brcmf: wifi@1 {
|
|
- reg = <1>;
|
|
- compatible = "brcm,bcm4329-fmac";
|
|
- };
|
|
-};
|
|
-
|
|
-/* EMMC2 is used to drive the SD card */
|
|
-&emmc2 {
|
|
- status = "okay";
|
|
- broken-cd;
|
|
- vqmmc-supply = <&sd_io_1v8_reg>;
|
|
-};
|
|
-
|
|
-&genet {
|
|
- phy-handle = <&phy1>;
|
|
- phy-mode = "rgmii-rxid";
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&genet_mdio {
|
|
- phy1: ethernet-phy@1 {
|
|
- /* No PHY interrupt */
|
|
- reg = <0x1>;
|
|
- led-modes = <0x00 0x08>; /* link/activity link */
|
|
- };
|
|
-};
|
|
-
|
|
-/* uart0 communicates with the BT module */
|
|
-&uart0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
|
|
- uart-has-rtscts;
|
|
- status = "okay";
|
|
-
|
|
- bluetooth {
|
|
- compatible = "brcm,bcm43438-bt";
|
|
- max-speed = <2000000>;
|
|
- shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
|
- };
|
|
-};
|
|
-
|
|
-/* uart1 is mapped to the pin header */
|
|
-&uart1 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&uart1_gpio14>;
|
|
- status = "okay";
|
|
-};
|