openwrt/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts
Yen-Ting-Shen 3f61e5e1b9 ipq40xx: add support for EnGenius EMR3500
SOC:     IPQ4018 / QCA Dakota
CPU:     Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:    256 MiB
NOR:     32 MiB
ETH:     Qualcomm Atheros QCA8072 (2 ports)
USB:     1 x 2.0 (Host controller in the SoC)
WLAN1:   Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:   Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:   RESET Button
LEDS:    White, Blue, Red, Orange

Flash instruction:

From EnGenius firmware to OpenWrt firmware:

In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emr3500-squashfs-factory.bin directly.

From OpenWrt firmware to EnGenius firmware:

1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8
   Put the EnGenius firmware in the TFTP server directory on your computer.
2. Power up EMR3500. Press 4 and then press any key to enter u-boot.
3. Download EnGenius firmware
   (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emr3500-nor-fw-s.img
4. Flash the firmware
   (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script
5. Reboot
   (IPQ40xx) # reset

Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com>
[squashed update patch, updated to 5.4, dropped BOARD_NAME,
migrated to SOC]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-06-13 14:38:03 +02:00
..
qcom-ipq4018-a42.dts
qcom-ipq4018-ap120c-ac.dts
qcom-ipq4018-cs-w3-wd1200g-eup.dts
qcom-ipq4018-dap-2610.dts ipq40xx: replace "ok" with "okay" for status in DTS files 2020-05-12 19:16:41 +02:00
qcom-ipq4018-ea6350v3.dts
qcom-ipq4018-eap1300.dts
qcom-ipq4018-emd1.dts
qcom-ipq4018-emr3500.dts ipq40xx: add support for EnGenius EMR3500 2020-06-13 14:38:03 +02:00
qcom-ipq4018-ens620ext.dts
qcom-ipq4018-ex61x0v2.dtsi
qcom-ipq4018-ex6100v2.dts
qcom-ipq4018-ex6150v2.dts
qcom-ipq4018-fritzbox-4040.dts
qcom-ipq4018-jalapeno.dts
qcom-ipq4018-jalapeno.dtsi
qcom-ipq4018-meshpoint-one.dts
qcom-ipq4018-nbg6617.dts
qcom-ipq4018-rt-ac58u.dts
qcom-ipq4018-wre6606.dts
qcom-ipq4019-a62.dts
qcom-ipq4019-ap.dk04.1-c1.dts
qcom-ipq4019-ap.dk04.1.dtsi
qcom-ipq4019-cm520-79f.dts ipq40xx: add support for MobiPromo CM520-79F 2020-04-10 15:22:26 +02:00
qcom-ipq4019-e2600ac-c1.dts
qcom-ipq4019-e2600ac-c2.dts
qcom-ipq4019-e2600ac.dtsi
qcom-ipq4019-ea8300.dts
qcom-ipq4019-eap2200.dts ipq40xx: fix support of EnGenius EAP2200 2020-03-05 12:53:06 +01:00
qcom-ipq4019-fritzbox-7530.dts
qcom-ipq4019-fritzrepeater-1200.dts
qcom-ipq4019-fritzrepeater-3000.dts
qcom-ipq4019-habanero-dvk.dts ipq40xx: add support for 8devices Habanero DVK 2020-03-09 00:53:50 +01:00
qcom-ipq4019-map-ac2200.dts
qcom-ipq4019-rtl30vw.dts ipq40xx: add support for Cell C RTL30VW 2020-04-10 15:22:26 +02:00
qcom-ipq4019-u4019-32m.dts
qcom-ipq4019-u4019.dtsi
qcom-ipq4019-wpj419.dts ipq40xx: replace "ok" with "okay" for status in DTS files 2020-05-12 19:16:41 +02:00
qcom-ipq4028-wpj428.dts ipq40xx: wpj428: fix missing MDIO GPIO reset and pinmux 2020-03-28 13:03:02 +01:00
qcom-ipq4029-ap-303.dts ipq40xx: add support for Aruba AP-365 2020-05-11 01:05:16 +02:00
qcom-ipq4029-ap-303h.dts ipq40xx: replace "ok" with "okay" for status in DTS files 2020-05-12 19:16:41 +02:00
qcom-ipq4029-ap-365.dts ipq40xx: add support for Aruba AP-365 2020-05-11 01:05:16 +02:00
qcom-ipq4029-aruba-glenmorangie.dtsi ipq40xx: replace "ok" with "okay" for status in DTS files 2020-05-12 19:16:41 +02:00
qcom-ipq4029-gl-b1300.dts
qcom-ipq4029-mr33.dts