mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
97f542238a
Backporting upstream patches to improve RTL8188F support. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
99 lines
3.8 KiB
Diff
99 lines
3.8 KiB
Diff
From 9475cc7ac31503521af95e38151e9d856e8ff30b Mon Sep 17 00:00:00 2001
|
|
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
|
|
Date: Sun, 31 Dec 2023 00:45:54 +0200
|
|
Subject: [PATCH 1/2] wifi: rtl8xxxu: Fix LED control code of RTL8192FU
|
|
|
|
Some devices, like the Comfast CF-826F, use LED1, which already works.
|
|
Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly.
|
|
|
|
Write the right values to the LED control registers to make LED0 work
|
|
as well.
|
|
|
|
This is unfortunately tested only with the Comfast CF-826F.
|
|
|
|
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
|
|
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
|
|
Signed-off-by: Kalle Valo <kvalo@kernel.org>
|
|
Link: https://msgid.link/7a2c3158-3a45-4466-b11e-fc09802b20e2@gmail.com
|
|
---
|
|
.../realtek/rtl8xxxu/rtl8xxxu_8192f.c | 32 +++++++++++++------
|
|
.../wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 15 +++++++++
|
|
2 files changed, 38 insertions(+), 9 deletions(-)
|
|
|
|
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192f.c
|
|
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192f.c
|
|
@@ -2014,26 +2014,40 @@ static int rtl8192fu_led_brightness_set(
|
|
struct rtl8xxxu_priv *priv = container_of(led_cdev,
|
|
struct rtl8xxxu_priv,
|
|
led_cdev);
|
|
- u16 ledcfg;
|
|
+ u32 ledcfg;
|
|
|
|
/* Values obtained by observing the USB traffic from the Windows driver. */
|
|
rtl8xxxu_write32(priv, REG_SW_GPIO_SHARE_CTRL_0, 0x20080);
|
|
rtl8xxxu_write32(priv, REG_SW_GPIO_SHARE_CTRL_1, 0x1b0000);
|
|
|
|
- ledcfg = rtl8xxxu_read16(priv, REG_LEDCFG0);
|
|
+ ledcfg = rtl8xxxu_read32(priv, REG_LEDCFG0);
|
|
+
|
|
+ /* Comfast CF-826F uses LED1. Asus USB-N13 C1 uses LED0. Set both. */
|
|
+
|
|
+ u32p_replace_bits(&ledcfg, LED_GPIO_ENABLE, LEDCFG0_LED2EN);
|
|
+ u32p_replace_bits(&ledcfg, LED_IO_MODE_OUTPUT, LEDCFG0_LED0_IO_MODE);
|
|
+ u32p_replace_bits(&ledcfg, LED_IO_MODE_OUTPUT, LEDCFG0_LED1_IO_MODE);
|
|
|
|
if (brightness == LED_OFF) {
|
|
- /* Value obtained like above. */
|
|
- ledcfg = BIT(1) | BIT(7);
|
|
+ u32p_replace_bits(&ledcfg, LED_MODE_SW_CTRL, LEDCFG0_LED0CM);
|
|
+ u32p_replace_bits(&ledcfg, LED_SW_OFF, LEDCFG0_LED0SV);
|
|
+ u32p_replace_bits(&ledcfg, LED_MODE_SW_CTRL, LEDCFG0_LED1CM);
|
|
+ u32p_replace_bits(&ledcfg, LED_SW_OFF, LEDCFG0_LED1SV);
|
|
} else if (brightness == LED_ON) {
|
|
- /* Value obtained like above. */
|
|
- ledcfg = BIT(1) | BIT(7) | BIT(11);
|
|
+ u32p_replace_bits(&ledcfg, LED_MODE_SW_CTRL, LEDCFG0_LED0CM);
|
|
+ u32p_replace_bits(&ledcfg, LED_SW_ON, LEDCFG0_LED0SV);
|
|
+ u32p_replace_bits(&ledcfg, LED_MODE_SW_CTRL, LEDCFG0_LED1CM);
|
|
+ u32p_replace_bits(&ledcfg, LED_SW_ON, LEDCFG0_LED1SV);
|
|
} else if (brightness == RTL8XXXU_HW_LED_CONTROL) {
|
|
- /* Value obtained by brute force. */
|
|
- ledcfg = BIT(8) | BIT(9);
|
|
+ u32p_replace_bits(&ledcfg, LED_MODE_TX_OR_RX_EVENTS,
|
|
+ LEDCFG0_LED0CM);
|
|
+ u32p_replace_bits(&ledcfg, LED_SW_OFF, LEDCFG0_LED0SV);
|
|
+ u32p_replace_bits(&ledcfg, LED_MODE_TX_OR_RX_EVENTS,
|
|
+ LEDCFG0_LED1CM);
|
|
+ u32p_replace_bits(&ledcfg, LED_SW_OFF, LEDCFG0_LED1SV);
|
|
}
|
|
|
|
- rtl8xxxu_write16(priv, REG_LEDCFG0, ledcfg);
|
|
+ rtl8xxxu_write32(priv, REG_LEDCFG0, ledcfg);
|
|
|
|
return 0;
|
|
}
|
|
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
|
|
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
|
|
@@ -146,6 +146,21 @@
|
|
#define GPIO_INTM_EDGE_TRIG_IRQ BIT(9)
|
|
|
|
#define REG_LEDCFG0 0x004c
|
|
+#define LEDCFG0_LED0CM GENMASK(2, 0)
|
|
+#define LEDCFG0_LED1CM GENMASK(10, 8)
|
|
+#define LED_MODE_SW_CTRL 0x0
|
|
+#define LED_MODE_TX_OR_RX_EVENTS 0x3
|
|
+#define LEDCFG0_LED0SV BIT(3)
|
|
+#define LEDCFG0_LED1SV BIT(11)
|
|
+#define LED_SW_OFF 0x0
|
|
+#define LED_SW_ON 0x1
|
|
+#define LEDCFG0_LED0_IO_MODE BIT(7)
|
|
+#define LEDCFG0_LED1_IO_MODE BIT(15)
|
|
+#define LED_IO_MODE_OUTPUT 0x0
|
|
+#define LED_IO_MODE_INPUT 0x1
|
|
+#define LEDCFG0_LED2EN BIT(21)
|
|
+#define LED_GPIO_DISABLE 0x0
|
|
+#define LED_GPIO_ENABLE 0x1
|
|
#define LEDCFG0_DPDT_SELECT BIT(23)
|
|
#define REG_LEDCFG1 0x004d
|
|
#define LEDCFG1_HW_LED_CONTROL BIT(1)
|