openwrt/package/boot/uboot-d1/patches/0087-sunxi-Add-temporary-RISC-V-version-of-board-code.patch

From e3152c690732fb141500379f32fbe2203fa47059 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 6 Aug 2022 00:48:38 -0500
Subject: [PATCH 87/90] sunxi: Add temporary RISC-V version of board code

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 board/sunxi/Makefile           |   3 +-
 board/sunxi/board-riscv.c      | 687 +++++++++++++++++++++++++++++++++
 include/configs/sunxi-common.h |   1 -
 3 files changed, 689 insertions(+), 2 deletions(-)
 create mode 100644 board/sunxi/board-riscv.c

--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -6,7 +6,8 @@
 #
 # (C) Copyright 2000-2003
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-obj-y	+= board.o
+obj-$(CONFIG_ARM)		+= board.o
+obj-$(CONFIG_RISCV)		+= board-riscv.o
 obj-$(CONFIG_SUN7I_GMAC)	+= gmac.o
 obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i_auto.o
 obj-$(CONFIG_MACH_SUN5I)	+= dram_sun5i_auto.o
--- /dev/null
+++ b/board/sunxi/board-riscv.c
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some board init for the Allwinner A10-evb board.
+ */
+
+#include <dm.h>
+#include <cpu.h>
+#include <env.h>
+#include <env_internal.h>
+#include <fdt_support.h>
+#include <generic-phy.h>
+#include <image.h>
+#include <init.h>
+#include <net.h>
+#include <phy-sun4i-usb.h>
+#include <ram.h>
+#include <remoteproc.h>
+#include <spl.h>
+#include <status_led.h>
+#include <sunxi_image.h>
+#include <u-boot/crc.h>
+#include <asm/csr.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_RISCV
+int board_init(void)
+{
+	/* https://lore.kernel.org/u-boot/31587574-4cd1-02da-9761-0134ac82b94b@sholland.org/ */
+	return cpu_probe_all();
+}
+
+int sunxi_get_sid(unsigned int *sid)
+{
+	return -ENODEV;
+}
+
+#define SPL_ADDR		CONFIG_SUNXI_SRAM_ADDRESS
+
+/* The low 8-bits of the 'boot_media' field in the SPL header */
+#define SUNXI_BOOTED_FROM_MMC0	0
+#define SUNXI_BOOTED_FROM_NAND	1
+#define SUNXI_BOOTED_FROM_MMC2	2
+#define SUNXI_BOOTED_FROM_SPI	3
+#define SUNXI_BOOTED_FROM_MMC0_HIGH	0x10
+#define SUNXI_BOOTED_FROM_MMC2_HIGH	0x12
+
+#define SUNXI_INVALID_BOOT_SOURCE	-1
+
+static int sunxi_egon_valid(struct boot_file_head *egon_head)
+{
+	return !memcmp(egon_head->magic, BOOT0_MAGIC, 8); /* eGON.BT0 */
+}
+
+static int sunxi_toc0_valid(struct toc0_main_info *toc0_info)
+{
+	return !memcmp(toc0_info->name, TOC0_MAIN_INFO_NAME, 8); /* TOC0.GLH */
+}
+
+static int sunxi_get_boot_source(void)
+{
+	struct boot_file_head *egon_head = (void *)SPL_ADDR;
+	struct toc0_main_info *toc0_info = (void *)SPL_ADDR;
+
+	/*
+	 * On the ARMv5 SoCs, the SPL header in SRAM is overwritten by the
+	 * exception vectors in U-Boot proper, so we won't find any
+	 * information there. Also the FEL stash is only valid in the SPL,
+	 * so we can't use that either. So if this is called from U-Boot
+	 * proper, just return MMC0 as a placeholder, for now.
+	 */
+	if (IS_ENABLED(CONFIG_MACH_SUNIV) &&
+	    !IS_ENABLED(CONFIG_SPL_BUILD))
+		return SUNXI_BOOTED_FROM_MMC0;
+
+	if (sunxi_egon_valid(egon_head))
+		return readb(&egon_head->boot_media);
+	if (sunxi_toc0_valid(toc0_info))
+		return readb(&toc0_info->platform[0]);
+
+	/* Not a valid image, so we must have been booted via FEL. */
+	return SUNXI_INVALID_BOOT_SOURCE;
+}
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ */
+uint32_t sunxi_get_boot_device(void)
+{
+	int boot_source = sunxi_get_boot_source();
+
+	/*
+	 * When booting from the SD card or NAND memory, the "eGON.BT0"
+	 * signature is expected to be found in memory at the address 0x0004
+	 * (see the "mksunxiboot" tool, which generates this header).
+	 *
+	 * When booting in the FEL mode over USB, this signature is patched in
+	 * memory and replaced with something else by the 'fel' tool. This other
+	 * signature is selected in such a way, that it can't be present in a
+	 * valid bootable SD card image (because the BROM would refuse to
+	 * execute the SPL in this case).
+	 *
+	 * This checks for the signature and if it is not found returns to
+	 * the FEL code in the BROM to wait and receive the main u-boot
+	 * binary over USB. If it is found, it determines where SPL was
+	 * read from.
+	 */
+	switch (boot_source) {
+	case SUNXI_INVALID_BOOT_SOURCE:
+		return BOOT_DEVICE_BOARD;
+	case SUNXI_BOOTED_FROM_MMC0:
+	case SUNXI_BOOTED_FROM_MMC0_HIGH:
+		return BOOT_DEVICE_MMC1;
+	case SUNXI_BOOTED_FROM_NAND:
+		return BOOT_DEVICE_NAND;
+	case SUNXI_BOOTED_FROM_MMC2:
+	case SUNXI_BOOTED_FROM_MMC2_HIGH:
+		return BOOT_DEVICE_MMC2;
+	case SUNXI_BOOTED_FROM_SPI:
+		return BOOT_DEVICE_SPI;
+	}
+
+	panic("Unknown boot source %d\n", boot_source);
+	return -1;		/* Never reached */
+}
+
+uint32_t sunxi_get_spl_size(void)
+{
+	struct boot_file_head *egon_head = (void *)SPL_ADDR;
+	struct toc0_main_info *toc0_info = (void *)SPL_ADDR;
+
+	if (sunxi_egon_valid(egon_head))
+		return readl(&egon_head->length);
+	if (sunxi_toc0_valid(toc0_info))
+		return readl(&toc0_info->length);
+
+	/* Not a valid image, so use the default U-Boot offset. */
+	return 0;
+}
+
+/*
+ * The eGON SPL image can be located at 8KB or at 128KB into an SD card or
+ * an eMMC device. The boot source has bit 4 set in the latter case.
+ * By adding 120KB to the normal offset when booting from a "high" location
+ * we can support both cases.
+ * Also U-Boot proper is located at least 32KB after the SPL, but will
+ * immediately follow the SPL if that is bigger than that.
+ */
+unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
+					   unsigned long raw_sect)
+{
+	unsigned long spl_size = sunxi_get_spl_size();
+	unsigned long sector;
+
+	sector = max(raw_sect, spl_size / 512);
+
+	switch (sunxi_get_boot_source()) {
+	case SUNXI_BOOTED_FROM_MMC0_HIGH:
+	case SUNXI_BOOTED_FROM_MMC2_HIGH:
+		sector += (128 - 8) * 2;
+		break;
+	}
+
+	printf("SPL size = %lu, sector = %lu\n", spl_size, sector);
+
+	return sector;
+}
+
+u32 spl_boot_device(void)
+{
+	return sunxi_get_boot_device();
+}
+
+#define CSR_MXSTATUS		0x7c0
+#define CSR_MHCR		0x7c1
+#define CSR_MCOR		0x7c2
+#define CSR_MHINT		0x7c5
+
+int spl_board_init_f(void)
+{
+	int ret;
+	struct udevice *dev;
+
+	/* DDR init */
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM init failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Initialize extension CSRs. */
+	printf("mxstatus=0x%08lx mhcr=0x%08lx mcor=0x%08lx mhint=0x%08lx\n",
+	       csr_read(CSR_MXSTATUS),
+	       csr_read(CSR_MHCR),
+	       csr_read(CSR_MCOR),
+	       csr_read(CSR_MHINT));
+
+	csr_set(CSR_MXSTATUS, 0x638000);
+	csr_write(CSR_MCOR, 0x70013);
+	csr_write(CSR_MHCR, 0x11ff);
+	csr_write(CSR_MHINT, 0x16e30c);
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+void spl_perform_fixups(struct spl_image_info *spl_image)
+{
+	struct ram_info info;
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret)
+		panic("No RAM device");
+
+	ret = ram_get_info(dev, &info);
+	if (ret)
+		panic("No RAM info");
+
+	ret = fdt_fixup_memory(spl_image->fdt_addr, info.base, info.size);
+	if (ret)
+		panic("Failed to update DTB");
+}
+#endif
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Try to use the environment from the boot source first.
+ * For MMC, this means a FAT partition on the boot device (SD or eMMC).
+ * If the raw MMC environment is also enabled, this is tried next.
+ * When booting from NAND we try UBI first, then NAND directly.
+ * SPI flash falls back to FAT (on SD card).
+ */
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	if (prio > 1)
+		return ENVL_UNKNOWN;
+
+	/* NOWHERE is exclusive, no other option can be defined. */
+	if (IS_ENABLED(CONFIG_ENV_IS_NOWHERE))
+		return ENVL_NOWHERE;
+
+	switch (sunxi_get_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
+		if (prio == 0 && IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
+			return ENVL_FAT;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC))
+			return ENVL_MMC;
+		break;
+	case BOOT_DEVICE_NAND:
+		if (prio == 0 && IS_ENABLED(CONFIG_ENV_IS_IN_UBI))
+			return ENVL_UBI;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
+			return ENVL_NAND;
+		break;
+	case BOOT_DEVICE_SPI:
+		if (prio == 0 && IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
+			return ENVL_SPI_FLASH;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
+			return ENVL_FAT;
+		break;
+	case BOOT_DEVICE_BOARD:
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * If we come here for the first time, we *must* return a valid
+	 * environment location other than ENVL_UNKNOWN, or the setup sequence
+	 * in board_f() will silently hang. This is arguably a bug in
+	 * env_init(), but for now pick one environment for which we know for
+	 * sure to have a driver for. For all defconfigs this is either FAT
+	 * or UBI, or NOWHERE, which is already handled above.
+	 */
+	if (prio == 0) {
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
+			return ENVL_FAT;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI))
+			return ENVL_UBI;
+	}
+
+	return ENVL_UNKNOWN;
+}
+
+/*
+ * On older SoCs the SPL is actually at address zero, so using NULL as
+ * an error value does not work.
+ */
+#define INVALID_SPL_HEADER ((void *)~0UL)
+
+static struct boot_file_head * get_spl_header(uint8_t req_version)
+{
+	struct boot_file_head *spl = (void *)(ulong)SPL_ADDR;
+	uint8_t spl_header_version = spl->spl_signature[3];
+
+	/* Is there really the SPL header (still) there? */
+	if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) != 0)
+		return INVALID_SPL_HEADER;
+
+	if (spl_header_version < req_version) {
+		printf("sunxi SPL version mismatch: expected %u, got %u\n",
+		       req_version, spl_header_version);
+		return INVALID_SPL_HEADER;
+	}
+
+	return spl;
+}
+
+static const char *get_spl_dt_name(void)
+{
+	struct boot_file_head *spl = get_spl_header(SPL_DT_HEADER_VERSION);
+
+	/* Check if there is a DT name stored in the SPL header. */
+	if (spl != INVALID_SPL_HEADER && spl->dt_name_offset)
+		return (char *)spl + spl->dt_name_offset;
+
+	return NULL;
+}
+
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
+int mmc_get_env_dev(void)
+{
+	switch (sunxi_get_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+		return 0;
+	case BOOT_DEVICE_MMC2:
+		return 1;
+	default:
+		return CONFIG_SYS_MMC_ENV_DEV;
+	}
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+void sunxi_board_init(void)
+{
+#ifdef CONFIG_LED_STATUS
+	if (IS_ENABLED(CONFIG_SPL_DRIVERS_MISC))
+		status_led_init();
+#endif
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET
+int g_dnl_board_usb_cable_connected(void)
+{
+	struct udevice *dev;
+	struct phy phy;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
+	if (ret) {
+		pr_err("%s: Cannot find USB device\n", __func__);
+		return ret;
+	}
+
+	ret = generic_phy_get_by_name(dev, "usb", &phy);
+	if (ret) {
+		pr_err("failed to get %s USB PHY\n", dev->name);
+		return ret;
+	}
+
+	ret = generic_phy_init(&phy);
+	if (ret) {
+		pr_debug("failed to init %s USB PHY\n", dev->name);
+		return ret;
+	}
+
+	return sun4i_usb_phy_vbus_detect(&phy);
+}
+#endif
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+	char *serial_string;
+	unsigned long long serial;
+
+	serial_string = env_get("serial#");
+
+	if (serial_string) {
+		serial = simple_strtoull(serial_string, NULL, 16);
+
+		serialnr->high = (unsigned int) (serial >> 32);
+		serialnr->low = (unsigned int) (serial & 0xffffffff);
+	} else {
+		serialnr->high = 0;
+		serialnr->low = 0;
+	}
+}
+#endif
+
+/*
+ * Check the SPL header for the "sunxi" variant. If found: parse values
+ * that might have been passed by the loader ("fel" utility), and update
+ * the environment accordingly.
+ */
+static void parse_spl_header(const uint32_t spl_addr)
+{
+	struct boot_file_head *spl = get_spl_header(SPL_ENV_HEADER_VERSION);
+
+	if (spl == INVALID_SPL_HEADER)
+		return;
+
+	if (!spl->fel_script_address)
+		return;
+
+	if (spl->fel_uEnv_length != 0) {
+		/*
+		 * data is expected in uEnv.txt compatible format, so "env
+		 * import -t" the string(s) at fel_script_address right away.
+		 */
+		himport_r(&env_htab, (char *)(uintptr_t)spl->fel_script_address,
+			  spl->fel_uEnv_length, '\n', H_NOCLEAR, 0, 0, NULL);
+		return;
+	}
+	/* otherwise assume .scr format (mkimage-type script) */
+	env_set_hex("fel_scriptaddr", spl->fel_script_address);
+}
+
+static bool get_unique_sid(unsigned int *sid)
+{
+	if (sunxi_get_sid(sid) != 0)
+		return false;
+
+	if (!sid[0])
+		return false;
+
+	/*
+	 * The single words 1 - 3 of the SID have quite a few bits
+	 * which are the same on many models, so we take a crc32
+	 * of all 3 words, to get a more unique value.
+	 *
+	 * Note we only do this on newer SoCs as we cannot change
+	 * the algorithm on older SoCs since those have been using
+	 * fixed mac-addresses based on only using word 3 for a
+	 * long time and changing a fixed mac-address with an
+	 * u-boot update is not good.
+	 */
+#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
+    !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
+    !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
+	sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
+#endif
+
+	/* Ensure the NIC specific bytes of the mac are not all 0 */
+	if ((sid[3] & 0xffffff) == 0)
+		sid[3] |= 0x800000;
+
+	return true;
+}
+
+/*
+ * Note this function gets called multiple times.
+ * It must not make any changes to env variables which already exist.
+ */
+static void setup_environment(const void *fdt)
+{
+	char serial_string[17] = { 0 };
+	unsigned int sid[4];
+	uint8_t mac_addr[6];
+	char ethaddr[16];
+	int i;
+
+	if (!get_unique_sid(sid))
+		return;
+
+	for (i = 0; i < 4; i++) {
+		sprintf(ethaddr, "ethernet%d", i);
+		if (!fdt_get_alias(fdt, ethaddr))
+			continue;
+
+		if (i == 0)
+			strcpy(ethaddr, "ethaddr");
+		else
+			sprintf(ethaddr, "eth%daddr", i);
+
+		if (env_get(ethaddr))
+			continue;
+
+		/* Non OUI / registered MAC address */
+		mac_addr[0] = (i << 4) | 0x02;
+		mac_addr[1] = (sid[0] >>  0) & 0xff;
+		mac_addr[2] = (sid[3] >> 24) & 0xff;
+		mac_addr[3] = (sid[3] >> 16) & 0xff;
+		mac_addr[4] = (sid[3] >>  8) & 0xff;
+		mac_addr[5] = (sid[3] >>  0) & 0xff;
+
+		eth_env_set_enetaddr(ethaddr, mac_addr);
+	}
+
+	if (!env_get("serial#")) {
+		snprintf(serial_string, sizeof(serial_string),
+			"%08x%08x", sid[0], sid[3]);
+
+		env_set("serial#", serial_string);
+	}
+}
+
+int misc_init_r(void)
+{
+	const char *spl_dt_name;
+	uint boot;
+
+	env_set("fel_booted", NULL);
+	env_set("fel_scriptaddr", NULL);
+	env_set("mmc_bootdev", NULL);
+
+	boot = sunxi_get_boot_device();
+	/* determine if we are running in FEL mode */
+	if (boot == BOOT_DEVICE_BOARD) {
+		env_set("fel_booted", "1");
+		parse_spl_header(SPL_ADDR);
+	/* or if we booted from MMC, and which one */
+	} else if (boot == BOOT_DEVICE_MMC1) {
+		env_set("mmc_bootdev", "0");
+	} else if (boot == BOOT_DEVICE_MMC2) {
+		env_set("mmc_bootdev", "1");
+	}
+
+	/* Set fdtfile to match the FIT configuration chosen in SPL. */
+	spl_dt_name = get_spl_dt_name();
+	if (spl_dt_name) {
+		char *prefix = IS_ENABLED(CONFIG_ARM64) ? "allwinner/" : "";
+		char str[64];
+
+		snprintf(str, sizeof(str), "%s%s.dtb", prefix, spl_dt_name);
+		env_set("fdtfile", str);
+	}
+
+	setup_environment(gd->fdt_blob);
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_USB_ETHER
+	usb_ether_init();
+#endif
+
+#ifdef SUNXI_SCP_BASE
+	if (!rproc_load(0, SUNXI_SCP_BASE, SUNXI_SCP_MAX_SIZE)) {
+		puts("Starting SCP...\n");
+		rproc_start(0);
+	}
+#endif
+
+	return 0;
+}
+
+static void bluetooth_dt_fixup(void *blob)
+{
+	/* Some devices ship with a Bluetooth controller default address.
+	 * Set a valid address through the device tree.
+	 */
+	uchar tmp[ETH_ALEN], bdaddr[ETH_ALEN];
+	unsigned int sid[4];
+	int i;
+
+	if (!CONFIG_BLUETOOTH_DT_DEVICE_FIXUP[0])
+		return;
+
+	if (eth_env_get_enetaddr("bdaddr", tmp)) {
+		/* Convert between the binary formats of the corresponding stacks */
+		for (i = 0; i < ETH_ALEN; ++i)
+			bdaddr[i] = tmp[ETH_ALEN - i - 1];
+	} else {
+		if (!get_unique_sid(sid))
+			return;
+
+		bdaddr[0] = ((sid[3] >>  0) & 0xff) ^ 1;
+		bdaddr[1] = (sid[3] >>  8) & 0xff;
+		bdaddr[2] = (sid[3] >> 16) & 0xff;
+		bdaddr[3] = (sid[3] >> 24) & 0xff;
+		bdaddr[4] = (sid[0] >>  0) & 0xff;
+		bdaddr[5] = 0x02;
+	}
+
+	do_fixup_by_compat(blob, CONFIG_BLUETOOTH_DT_DEVICE_FIXUP,
+			   "local-bd-address", bdaddr, ETH_ALEN, 1);
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	int __maybe_unused r;
+
+	/*
+	 * Call setup_environment and fdt_fixup_ethernet again
+	 * in case the boot fdt has ethernet aliases the u-boot
+	 * copy does not have.
+	 */
+	setup_environment(blob);
+	fdt_fixup_ethernet(blob);
+
+	bluetooth_dt_fixup(blob);
+
+#ifdef CONFIG_VIDEO_DT_SIMPLEFB
+	r = sunxi_simplefb_setup(blob);
+	if (r)
+		return r;
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+
+static void set_spl_dt_name(const char *name)
+{
+	struct boot_file_head *spl = get_spl_header(SPL_ENV_HEADER_VERSION);
+
+	if (spl == INVALID_SPL_HEADER)
+		return;
+
+	/* Promote the header version for U-Boot proper, if needed. */
+	if (spl->spl_signature[3] < SPL_DT_HEADER_VERSION)
+		spl->spl_signature[3] = SPL_DT_HEADER_VERSION;
+
+	strcpy((char *)&spl->string_pool, name);
+	spl->dt_name_offset = offsetof(struct boot_file_head, string_pool);
+}
+
+int board_fit_config_name_match(const char *name)
+{
+	const char *best_dt_name = get_spl_dt_name();
+	int ret;
+
+#ifdef CONFIG_DEFAULT_DEVICE_TREE
+	if (best_dt_name == NULL)
+		best_dt_name = CONFIG_DEFAULT_DEVICE_TREE;
+#endif
+
+	if (best_dt_name == NULL) {
+		/* No DT name was provided, so accept the first config. */
+		return 0;
+	}
+#ifdef CONFIG_PINE64_DT_SELECTION
+	if (strstr(best_dt_name, "-pine64-plus")) {
+		/* Differentiate the Pine A64 boards by their DRAM size. */
+		if ((gd->ram_size == 512 * 1024 * 1024))
+			best_dt_name = "sun50i-a64-pine64";
+	}
+#endif
+#ifdef CONFIG_PINEPHONE_DT_SELECTION
+	if (strstr(best_dt_name, "-pinephone")) {
+		/* Differentiate the PinePhone revisions by GPIO inputs. */
+		prcm_apb0_enable(PRCM_APB0_GATE_PIO);
+		sunxi_gpio_set_pull(SUNXI_GPL(6), SUNXI_GPIO_PULL_UP);
+		sunxi_gpio_set_cfgpin(SUNXI_GPL(6), SUNXI_GPIO_INPUT);
+		udelay(100);
+
+		/* PL6 is pulled low by the modem on v1.2. */
+		if (gpio_get_value(SUNXI_GPL(6)) == 0)
+			best_dt_name = "sun50i-a64-pinephone-1.2";
+		else
+			best_dt_name = "sun50i-a64-pinephone-1.1";
+
+		sunxi_gpio_set_cfgpin(SUNXI_GPL(6), SUNXI_GPIO_DISABLE);
+		sunxi_gpio_set_pull(SUNXI_GPL(6), SUNXI_GPIO_PULL_DISABLE);
+		prcm_apb0_disable(PRCM_APB0_GATE_PIO);
+	}
+#endif
+
+	ret = strcmp(name, best_dt_name);
+
+	/*
+	 * If one of the FIT configurations matches the most accurate DT name,
+	 * update the SPL header to provide that DT name to U-Boot proper.
+	 */
+	if (ret == 0)
+		set_spl_dt_name(best_dt_name);
+
+	return ret;
+}
+#endif
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -12,7 +12,6 @@
 #ifndef _SUNXI_COMMON_CONFIG_H
 #define _SUNXI_COMMON_CONFIG_H
 
-#include <asm/arch/cpu.h>
 #include <linux/stringify.h>
 
 /* Serial & console */