openwrt/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts
Shiji Yang 6cbcc34f50 ramips: disable unsupported background radar detection
Background radar detection is not supported on devices that
using MT7905, so disable this feature in the following devices:
  asus,rt-ax53u
  jcg,q20
  tplink,eap615-wall-v1
  xiaomi,mi-router-cr6606
  xiaomi,mi-router-cr6608
  xiaomi,mi-router-cr6609
  yuncore,ax820

Devices with MT7915 lacking a DFS antenna also do not support
background DFS:
  totolink,x5000r
  cudy,x6

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2022-09-12 00:14:02 +01:00

204 lines
3.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,eap615-wall-v1", "mediatek,mt7621-soc";
model = "TP-Link EAP615-Wall v1";
aliases {
label-mac-device = &gmac0;
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "white:status";
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
led {
label = "led";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
reset {
label = "reset";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-export {
compatible = "gpio-export";
poe_passthrough {
gpio-export,name = "poe-passthrough";
gpio-export,output = <0>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
};
};
&ethernet {
reg = <0x1e100000 0xe000>;
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "partition-table";
reg = <0x80000 0x10000>;
read-only;
};
info: partition@90000 {
label = "product-info";
reg = <0x90000 0x10000>;
read-only;
};
partition@a0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0xa0000 0xcf0000>;
};
partition@d90000 {
label = "user-config";
reg = <0xd90000 0x60000>;
read-only;
};
partition@f30000 {
label = "mutil-log";
reg = <0xf30000 0x80000>;
read-only;
};
partition@fb0000 {
label = "oops";
reg = <0xfb0000 0x40000>;
read-only;
};
radio: partition@ff0000 {
label = "radio";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&state_default {
gpio {
groups = "uart2", "uart3";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x0>;
mediatek,disable-radar-background;
};
};
&pcie2 {
status = "disabled";
};
&gmac0 {
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "lan0";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
compatible = "mediatek,mt7530";
ports {
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&info {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
reg = <0x8 0x6>;
};
};