Claudiu Beznea 3e53eec589 at91: add support for sama7g5-ek board ... Add support for SAMA7G5-EK board. Hardware: - SoC: SAMA7G5 - RAM: Aliance Memory AS4C256M16D3LC (4 Gbit DDR3L) - SD/MMC: 1 standard 4bit SD Card interface - USB: 1 Micro-AB host/device, 1 Type-A host, 1 Type-C host - CAN: 2 interfaces - Ethernet: 10/100 port, 1Gbps port - Wi-Fi/BT: 1 optional interface - Audio: 1 SPDIF RX port, 1 SPDIF TX port, 4 digital microphones - Camera: 1 RPi CSI camera interface - Debug: 1 J-Link-OB + CDC, 1 JTAG - LEDs: 1 RGB - Buttons: 4 push buttons - Expansions: 1 RPi Expansion connector, 2 mikroBUS connectors - Power management: 1 power management IC, 1 power consumption measurement device Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>		2022-02-24 19:05:29 +01:00
..
base-files/etc	at91: add support for sama7g5-ek board	2022-02-24 19:05:29 +01:00
files/arch/arm/boot/dts	at91: kernel: bump to 5.10	2021-10-24 18:52:06 +02:00
image	at91: add support for sama7g5-ek board	2022-02-24 19:05:29 +01:00
patches-5.10	at91: add kernel support for sama7g5 soc	2022-02-24 19:05:28 +01:00
sam9x	at91: add kernel support for sama7g5 soc	2022-02-24 19:05:28 +01:00
sama5	at91: add kernel support for sama7g5 soc	2022-02-24 19:05:28 +01:00
sama7	at91: add kernel support for sama7g5 soc	2022-02-24 19:05:28 +01:00
Makefile	at91: add kernel support for sama7g5 soc	2022-02-24 19:05:28 +01:00
modules.mk	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00