mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
5c142aad7b
After the kernel has switched version to 5.10, JA76PF2 and RouterStations lost the capability to sysupgrade the OpenWrt version. The cause is the lack of porting the patches responsible for partial flash erase block writing and these boards FIS directory and RedBoot config partitions share the same erase block. Because of that the FIS directory can't be updated to accommodate kernel/rootfs partition size changes. This could be remedied by bootloader update, but it is very intrusive and could potentially lead to non-trivial recovery procedure, if something went wrong. The less difficult option is to use OpenWrt kernel loader, which will let us use static partition sizes and employ mtd splitter to dynamically adjust kernel and rootfs partition sizes. On sysupgrade from ath79 19.07 or 21.02 image, which still let to modify FIS directory, the loader will be written to kernel partition, while the kernel+rootfs to rootfs partition. The caveats are: * image format changes, no possible upgrade from ar71xx target images * downgrade to any older OpenWrt version will require TFTP recovery or usage of bootloader command line interface To downgrade to 19.07 or 21.02, or to upgrade if one is already on OpenWrt with kernel 5.10, for RouterStations use TFTP recovery procedure. For JA76PF2 use instructions from this commit message: commit0cc87b3bac("ath79: image: disable sysupgrade images for routerstations and ja76pf2"), replacing kernel image with loader (loader.bin suffix) and rootfs image with firmware (firmware.bin suffix). Fixes:b10d604459("kernel: add linux 5.10 support") Fixes:15aa53d7ee("ath79: switch to Kernel 5.10") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (mkubntimage was moved to generic-ubnt.mk) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
143 lines
3.6 KiB
Makefile
143 lines
3.6 KiB
Makefile
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
|
|
|
|
# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
|
|
# VERSION_DIST being on the place of major(?) version number, so we need to
|
|
# use some number.
|
|
UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
|
|
|
|
# mkubntimage is using the kernel image direct
|
|
# routerboard creates partitions out of the ubnt header
|
|
define Build/mkubntimage
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-k $(if $(1),$(1),$(IMAGE_KERNEL)) -r $@ -o $@
|
|
endef
|
|
|
|
define Build/mkubntimage2
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-p jffs2:0x50000:0xf60000:0:0:$@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
|
|
# booting the image, the size doesn't matter.
|
|
define Build/mkubntimage-split
|
|
-[ -f $@ ] && ( \
|
|
dd if=$@ of=$@.old1 bs=1024k count=1; \
|
|
dd if=$@ of=$@.old2 bs=1024k skip=1; \
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
|
|
-k $@.old1 -r $@.old2 -o $@; \
|
|
rm $@.old1 $@.old2 )
|
|
endef
|
|
|
|
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
|
|
# UBNT_TYPE e.g. one of (BZ, XM, XW)
|
|
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
|
|
# UBNT_VERSION e.g. one of (6.0.0, 8.5.3)
|
|
define Device/ubnt
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | mkubntimage-split
|
|
endef
|
|
|
|
define Device/ubnt-bz
|
|
$(Device/ubnt)
|
|
SOC := ar7241
|
|
IMAGE_SIZE := 7448k
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar7240
|
|
UBNT_TYPE := BZ
|
|
UBNT_VERSION := 6.0.0
|
|
endef
|
|
|
|
define Device/ubnt-sw
|
|
$(Device/ubnt)
|
|
SOC := ar7242
|
|
DEVICE_PACKAGES += kmod-usb-ohci
|
|
IMAGE_SIZE := 7552k
|
|
UBNT_BOARD := SW
|
|
UBNT_CHIP := ar7240
|
|
UBNT_TYPE := SW
|
|
UBNT_VERSION := 1.4.1
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
|
|
endef
|
|
|
|
define Device/ubnt-2wa
|
|
$(Device/ubnt)
|
|
SOC := ar9342
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := WA
|
|
UBNT_CHIP := ar934x
|
|
UBNT_TYPE := 2WA
|
|
UBNT_VERSION := 8.5.3
|
|
endef
|
|
|
|
define Device/ubnt-wa
|
|
$(Device/ubnt)
|
|
SOC := ar9342
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := WA
|
|
UBNT_CHIP := ar934x
|
|
UBNT_TYPE := WA
|
|
UBNT_VERSION := 8.5.3
|
|
endef
|
|
|
|
define Device/ubnt-xc
|
|
$(Device/ubnt)
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := XC
|
|
UBNT_CHIP := qca955x
|
|
UBNT_TYPE := XC
|
|
UBNT_VERSION := 8.5.3
|
|
endef
|
|
|
|
define Device/ubnt-xm
|
|
$(Device/ubnt)
|
|
DEVICE_VARIANT := XM
|
|
DEVICE_PACKAGES += kmod-usb-ohci
|
|
IMAGE_SIZE := 7448k
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar7240
|
|
UBNT_REVISION := 42.$(UBNT_REVISION)
|
|
UBNT_TYPE := XM
|
|
UBNT_VERSION := 6.0.0
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
|
|
endef
|
|
|
|
define Device/ubnt-xw
|
|
$(Device/ubnt)
|
|
SOC := ar9342
|
|
DEVICE_VARIANT := XW
|
|
IMAGE_SIZE := 7552k
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar934x
|
|
UBNT_REVISION := 42.$(UBNT_REVISION)
|
|
UBNT_TYPE := XW
|
|
UBNT_VERSION := 6.0.4
|
|
endef
|
|
|
|
define Device/ubnt-unifi-jffs2
|
|
$(Device/ubnt)
|
|
KERNEL_SIZE := 3072k
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_TYPE := BZ
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\
|
|
pad-rootfs | check-size | append-metadata
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
|
|
endef
|
|
|
|
define Device/ubnt-acb
|
|
$(Device/ubnt)
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := ACB
|
|
UBNT_TYPE := ACB
|
|
UBNT_VERSION := 2.5.0
|
|
endef
|