openwrt/target/linux/qualcommax/image/ipq807x.mk
Robert Marko 3d7cb14211 qualcommax: ipq807x: add Asus RT-AX89X BX revision
This commit adds support for Asus RT-AX89X BX revision.

WARNING: Only the BX revision boards (So B1, B2 etc) are supported because
AX revision boards use IPQ8074 v1 SoC which is unsupported.

Specifications:
---------------
* CPU: Qualcomm IPQ8074A Quad core Cortex-A53 @ 2.2GHz
* RAM: 1024MB
* Storage: 256MB SLC NAND (Macronix MX30UF2G18AC)
* Ethernet:
	* 5x 1G RJ45 ports via QCA8337 switch
	* 3x 1G RJ45 ports via internal switch (QCA8075 PHY)
	* 1x 10G RJ45 via internal switch (AQR113C PHY)
	* 1x 10G SFP+ slot via internal switch
* WLAN:
	* 2.4GHz 4x4
	* 5GHz 8x8
	* 8 external antennas
* USB: 2x USB 3.0 Type-A
* Buttons:
	* Power switch
	* WPS
	* Reset
	* Wireless ON/OFF
	* LED ON/OFF
LED-s:
	* Power
	* Wi-Fi
	* WAN
	* 10G
	* SFP+
Power:
	* 19.5V via DC jack

Installation instructions:
--------------------------
1. Flash temporary OpenWrt initramfs:
* Flash openwrt-qualcommax-ipq807x-asus_rt-ax89x-initramfs-factory.trx
via the stock firmware.
Administration -> Firmware Upgrade -> Manual Firmware update (Upload)

After flashing the device will reboot with OpenWrt initramfs and it can
be accesed via any of the LAN ports via SSH with the usual OpenWrt
default credentials.

2. Sysupgrade from OpenWrt initramfs:
* Copy openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin to
/tmp/openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin of
the running initramfs image.
* Simply sysupgrade -n /tmp/openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin

After flashing the device will reboot with OpenWrt initramfs and it can
be accesed via any of the LAN ports via SSH with the usual OpenWrt
default credentials.

Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-07-09 12:33:17 +02:00

439 lines
12 KiB
Makefile

define Build/asus-fake-ramdisk
rm -rf $(KDIR)/tmp/fakerd
dd if=/dev/zero bs=32 count=1 > $(KDIR)/tmp/fakerd
$(info KERNEL_INITRAMFS is $(KERNEL_INITRAMFS))
endef
define Build/asus-fake-rootfs
$(eval comp=$(word 1,$(1)))
$(eval filepath=$(word 2,$(1)))
$(eval filecont=$(word 3,$(1)))
rm -rf $(KDIR)/tmp/fakefs $(KDIR)/tmp/fakehsqs
mkdir -p $(KDIR)/tmp/fakefs/$$(dirname $(filepath))
echo '$(filecont)' > $(KDIR)/tmp/fakefs/$(filepath)
$(STAGING_DIR_HOST)/bin/mksquashfs4 $(KDIR)/tmp/fakefs $(KDIR)/tmp/fakehsqs -comp $(comp) \
-b 4096 -no-exports -no-sparse -no-xattrs -all-root -noappend \
$(wordlist 4,$(words $(1)),$(1))
endef
define Build/asus-trx
$(STAGING_DIR_HOST)/bin/asusuimage $(wordlist 1,$(words $(1)),$(1)) -i $@ -o $@.new
mv $@.new $@
endef
define Build/wax6xx-netgear-tar
mkdir $@.tmp
mv $@ $@.tmp/nand-ipq807x-apps.img
md5sum $@.tmp/nand-ipq807x-apps.img | cut -c 1-32 > $@.tmp/nand-ipq807x-apps.md5sum
echo $(DEVICE_MODEL) > $@.tmp/metadata.txt
echo $(DEVICE_MODEL)"_V9.9.9.9" > $@.tmp/version
tar -C $@.tmp/ -cf $@ .
rm -rf $@.tmp
endef
define Device/arcadyan_aw1000
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := AW1000
BLOCKSIZE := 256k
PAGESIZE := 4096
DEVICE_DTS_CONFIG := config@hk09
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-arcadyan_aw1000 kmod-spi-gpio \
kmod-gpio-nxp-74hc164 kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += arcadyan_aw1000
define Device/asus_rt-ax89x
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-AX89X
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk01
SOC := ipq8074
DEVICE_PACKAGES := kmod-hwmon-gpiofan ipq-wifi-asus_rt-ax89x
KERNEL_NAME := vmlinux
KERNEL := kernel-bin | libdeflate-gzip
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin/squashfs := \
append-kernel | asus-fake-ramdisk |\
multiImage gzip $$(KDIR)/tmp/fakerd $$(KDIR)/image-$$(DEVICE_DTS).dtb |\
sysupgrade-tar kernel=$$$$@ | append-metadata
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.trx initramfs-uImage.itb
ARTIFACT/initramfs-uImage.itb := \
append-image-stage initramfs-kernel.bin | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
ARTIFACT/initramfs-factory.trx := \
append-image-stage initramfs-kernel.bin |\
asus-fake-rootfs xz /lib/firmware/IPQ8074A/fw_version.txt "fake" -no-compression |\
multiImage gzip $$(KDIR)/tmp/fakehsqs $$(KDIR)/image-$$(DEVICE_DTS).dtb |\
asus-trx -v 2 -n RT-AX89U -b 388 -e 49000
endif
endef
TARGET_DEVICES += asus_rt-ax89x
define Device/buffalo_wxr-5950ax12
$(call Device/FitImage)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WXR-5950AX12
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk01
SOC := ipq8074
DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
endef
TARGET_DEVICES += buffalo_wxr-5950ax12
define Device/cmcc_rm2-6
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := CMCC
DEVICE_MODEL := RM2-6
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac02
SOC := ipq8070
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
DEVICE_PACKAGES := ipq-wifi-cmcc_rm2-6 kmod-hwmon-gpiofan
endef
TARGET_DEVICES += cmcc_rm2-6
define Device/compex_wpq873
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPQ873
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk09.wpq873
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-compex_wpq873
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += compex_wpq873
define Device/dynalink_dl-wrx36
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Dynalink
DEVICE_MODEL := DL-WRX36
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
endef
TARGET_DEVICES += dynalink_dl-wrx36
define Device/edgecore_eap102
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := EAP102
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac02
SOC := ipq8071
DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += edgecore_eap102
define Device/edimax_cax1800
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edimax
DEVICE_MODEL := CAX1800
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac03
SOC := ipq8070
DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
endef
TARGET_DEVICES += edimax_cax1800
define Device/linksys_mx
$(call Device/FitImage)
DEVICE_VENDOR := Linksys
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 147456k
NAND_SIZE := 512m
SOC := ipq8072
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=$$$$(DEVICE_MODEL)
DEVICE_PACKAGES := kmod-leds-pca963x
endef
define Device/linksys_mx4200v1
$(call Device/linksys_mx)
DEVICE_MODEL := MX4200
DEVICE_VARIANT := v1
SOC := ipq8174
DEVICE_PACKAGES += ipq-wifi-linksys_mx4200 kmod-bluetooth
endef
TARGET_DEVICES += linksys_mx4200v1
define Device/linksys_mx4200v2
$(call Device/linksys_mx4200v1)
DEVICE_VARIANT := v2
endef
TARGET_DEVICES += linksys_mx4200v2
define Device/linksys_mx5300
$(call Device/linksys_mx)
DEVICE_MODEL := MX5300
DEVICE_PACKAGES += kmod-rtc-ds1307 ipq-wifi-linksys_mx5300 \
kmod-ath10k-ct ath10k-firmware-qca9984-ct
endef
TARGET_DEVICES += linksys_mx5300
define Device/linksys_mx8500
$(call Device/linksys_mx)
DEVICE_MODEL := MX8500
DEVICE_PACKAGES += ipq-wifi-linksys_mx8500 kmod-ath11k-pci \
ath11k-firmware-qcn9074 kmod-bluetooth
endef
TARGET_DEVICES += linksys_mx8500
define Device/netgear_rax120v2
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Netgear
DEVICE_MODEL := RAX120v2
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk01
SOC := ipq8074
KERNEL_SIZE := 29696k
NETGEAR_BOARD_ID := RAX120
NETGEAR_HW_ID := 29765589+0+512+1024+4x4+8x8
DEVICE_PACKAGES := ipq-wifi-netgear_rax120v2 kmod-spi-gpio \
kmod-spi-bitbang kmod-gpio-nxp-74hc164 kmod-hwmon-g762
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
IMAGES += web-ui-factory.img
IMAGE/web-ui-factory.img := append-image initramfs-uImage.itb | \
pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | \
netgear-dni
endif
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
append-metadata
endef
TARGET_DEVICES += netgear_rax120v2
define Device/netgear_sxk80
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_PACKAGES += ipq-wifi-netgear_sxk80
DEVICE_VENDOR := Netgear
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk01
SOC := ipq8074
KERNEL_SIZE := 6272k
NETGEAR_HW_ID := 29766265+0+512+1024+4x4+4x4+4x4
endef
define Device/netgear_sxr80
$(call Device/netgear_sxk80)
DEVICE_MODEL := SXR80
NETGEAR_BOARD_ID := SXR80
endef
TARGET_DEVICES += netgear_sxr80
define Device/netgear_sxs80
$(call Device/netgear_sxk80)
DEVICE_MODEL := SXS80
NETGEAR_BOARD_ID := SXS80
endef
TARGET_DEVICES += netgear_sxs80
define Device/netgear_wax218
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Netgear
DEVICE_MODEL := WAX218
DEVICE_DTS_CONFIG := config@hk07
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := ipq8072
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := web-ui-factory.fit
ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
ubinize-kernel | qsdk-ipq-factory-nand
endif
DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
ipq-wifi-netgear_wax218
endef
TARGET_DEVICES += netgear_wax218
define Device/netgear_wax620
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Netgear
DEVICE_MODEL := WAX620
DEVICE_DTS_CONFIG := config@hk07
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := ipq8072
DEVICE_PACKAGES := kmod-spi-gpio kmod-gpio-nxp-74hc164 \
ipq-wifi-netgear_wax620
endef
TARGET_DEVICES += netgear_wax620
define Device/netgear_wax630
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Netgear
DEVICE_MODEL := WAX630
DEVICE_DTS_CONFIG := config@hk01
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := ipq8074
IMAGES += ui-factory.tar
IMAGE/ui-factory.tar := append-ubi | wax6xx-netgear-tar
DEVICE_PACKAGES := kmod-spi-gpio ipq-wifi-netgear_wax630
endef
TARGET_DEVICES += netgear_wax630
define Device/prpl_haze
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := prpl Foundation
DEVICE_MODEL := Haze
DEVICE_DTS_CONFIG := config@hk09
SOC := ipq8072
DEVICE_PACKAGES := ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci \
mkf2fs f2fsck kmod-fs-f2fs kmod-leds-lp5562
endef
TARGET_DEVICES += prpl_haze
define Device/qnap_301w
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := QNAP
DEVICE_MODEL := 301w
DEVICE_DTS_CONFIG := config@hk01
KERNEL_SIZE := 16384k
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-qnap_301w
endef
TARGET_DEVICES += qnap_301w
define Device/redmi_ax6
$(call Device/xiaomi_ax3600)
DEVICE_VENDOR := Redmi
DEVICE_MODEL := AX6
DEVICE_PACKAGES := ipq-wifi-redmi_ax6
endef
TARGET_DEVICES += redmi_ax6
define Device/spectrum_sax1v1k
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := Spectrum
DEVICE_MODEL := SAX1V1K
DEVICE_DTS_CONFIG := config@rt5010w-d187-rev6
SOC := ipq8072
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := ipq-wifi-spectrum_sax1v1k
endef
TARGET_DEVICES += spectrum_sax1v1k
define Device/xiaomi_ax3600
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := AX3600
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac04
SOC := ipq8071
KERNEL_SIZE := 36608k
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_ax3600
define Device/xiaomi_ax9000
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := AX9000
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk14
SOC := ipq8072
KERNEL_SIZE := 57344k
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
kmod-ath10k-ct ath10k-firmware-qca9887-ct
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_ax9000
define Device/yuncore_ax880
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Yuncore
DEVICE_MODEL := AX880
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk09
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-yuncore_ax880
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += yuncore_ax880
define Device/zbtlink_zbt-z800ax
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-Z800AX
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk09
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-zbtlink_zbt-z800ax
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += zbtlink_zbt-z800ax
define Device/zte_mf269
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := ZTE
DEVICE_MODEL := MF269
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac04
SOC := ipq8071
KERNEL_SIZE := 53248k
DEVICE_PACKAGES := ipq-wifi-zte_mf269
endef
TARGET_DEVICES += zte_mf269
define Device/zyxel_nbg7815
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := ZYXEL
DEVICE_MODEL := NBG7815
DEVICE_DTS_CONFIG := config@nbg7815
SOC := ipq8074
DEVICE_PACKAGES := ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci \
kmod-bluetooth kmod-hwmon-tmp103
endef
TARGET_DEVICES += zyxel_nbg7815