openwrt/target/linux/bcm63xx/dts/bcm63169-comtrend-vg-8050.dts
Adrian Schmutzler 5a7d11fb78 bcm63xx: replace further "ok" with "okay" in DTS files
While "ok" is recognized in DT parsing, only "okay" is actually
mentioned as valid value. Replace it accordingly.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-22 18:26:29 +02:00

199 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
/dts-v1/;
#include "bcm63268.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend VG-8050";
compatible = "comtrend,vg-8050", "brcm,bcm63268";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "rootfstype=squashfs,ubifs noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 33 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
};
&leds {
status = "okay";
brcm,serial-leds;
brcm,serial-dat-low;
brcm,serial-shift-inv;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial_led>;
led@2 {
reg = <2>;
active-low;
label = "vg-8050:red:internet";
};
led@3 {
reg = <3>;
active-low;
label = "vg-8050:red:power";
};
led_power_green: led@6 {
reg = <6>;
active-low;
label = "vg-8050:green:power";
default-state = "on";
};
led@7 {
reg = <7>;
active-low;
label = "vg-8050:green:wps";
};
led@8 {
reg = <8>;
active-low;
label = "vg-8050:green:internet";
};
led@10 {
reg = <10>;
active-low;
label = "vg-8050:green:voip";
};
led@12 {
reg = <12>;
active-low;
label = "vg-8050:red:voip";
};
led@14 {
reg = <14>;
active-low;
label = "vg-8050:red:wps";
};
};
&hsspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hsspi_cs5>;
switch@0 {
compatible = "brcm,bcm53125";
reg = <5>;
spi-max-frequency = <781000>;
spi-cpha;
spi-cpol;
lede,alias = "eth0";
ports {
#address-cells = <1>;
#size-cells = <0>;
lan@0 {
reg = <0>;
label = "lan4";
};
lan@1 {
reg = <1>;
label = "lan3";
};
lan@2 {
reg = <2>;
label = "lan2";
};
lan@3 {
reg = <3>;
label = "lan1";
};
wan@4 {
reg = <4>;
label = "wan";
};
cpu@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
asym-pause;
pause;
};
};
};
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
#size-cells = <1>;
#address-cells = <1>;
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <15>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cferom@0 {
label = "cferom";
reg = <0x0000000 0x0020000>;
read-only;
};
wfi@20000 {
compatible = "brcm,wfi";
label = "wfi";
reg = <0x0020000 0x7ee0000>;
};
};
};
};
&uart0 {
status = "okay";
};