Eros Brigmann ba30cbef41 ramips: add support for Wavlink WL-WN531G3-A2 ... This device is exactly the same as WL-WN531G3 but with different partition layout and different MAC layout. Labeled as Quantum D4G Rev.: A2. Hardware -------- SoC: Mediatek MT7620A RAM: 64MB FLASH: 8MB NOR (GigaDevice GD25Q64CS) ETH: - 2x 10/100/1000 Mbps Ethernet (RTL8211F) - 3x 10/100 Mbps Ethernet (integrated in SOC) WIFI: - 2.4GHz: 1x (integrated in SOC) (2x2:2) - 5GHz: 1x MT7612E (2x2:2) - 4 external antennas BTN: - 1x Reset button - 1x Touchlink button - 1x Turbo button - 1x Wps button - 1x ON/OFF switch LEDS: - 1x Red led (system status) - 1x Blue led (system status) - 5x Blue leds (ethernet ports) - 1x Power led - 1x Wifi led UART: - 57600-8-N-1 Everything works correctly. Installation ------------ Flash the initramfs image in the OEM firmware interface When Openwrt boots, flash the sysupgrade image otherwise you won't be able to keep configuration between reboots. Notes ----- 1) Router mac addresses: LAN XX:XX:XX:XX:XX:0F (factory @ 0x28) WAN XX:XX:XX:XX:XX:10 (factory @ 0x2e) WIFI 2G XX:XX:XX:XX:XX:11 (factory @ 0x04) WIFI 5G XX:XX:XX:XX:XX:12 (factory @ 0x8004) LABEL XX:XX:XX:XX:XX:11 Signed-off-by: Eros Brigmann <erosbrigmann@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15876 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2024-07-21 18:47:37 +02:00
..
base-files	ramips: add support for Wavlink WL-WN531G3-A2	2024-07-21 18:47:37 +02:00
config-6.6	ramips: make SoC dtsi compatible with upstream mmc-mtk driver	2024-07-11 18:57:41 +02:00
target.mk	treewide: replace wpad-basic-wolfssl default	2023-02-04 02:35:03 +01:00