mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
3da861ccca
Refreshed all patches. The following patches were manually changed: * 610-netfilter_match_bypass_default_checks.patch * 611-netfilter_match_bypass_default_table.patch * 802-can-0002-can-rx-offload-fix-long-lines.patch * 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch * 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch * 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch * 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch * 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch The can-dev.ko model was moved in the upstream kernel. Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
146 lines
4.4 KiB
Diff
146 lines
4.4 KiB
Diff
From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
|
|
Date: Fri, 27 Mar 2020 15:44:12 +0100
|
|
Subject: [PATCH] net: dsa: mt7530: use resolved link config in mac_link_up()
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Convert the mt7530 switch driver to use the finalised link
|
|
parameters in mac_link_up() rather than the parameters in mac_config().
|
|
|
|
Signed-off-by: René van Dorst <opensource@vdorst.com>
|
|
Tested-by: Sean Wang <sean.wang@mediatek.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
|
|
--- a/drivers/net/dsa/mt7530.c
|
|
+++ b/drivers/net/dsa/mt7530.c
|
|
@@ -488,17 +488,6 @@ mt7530_mib_reset(struct dsa_switch *ds)
|
|
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
|
|
}
|
|
|
|
-static void
|
|
-mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable)
|
|
-{
|
|
- u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK;
|
|
-
|
|
- if (enable)
|
|
- mt7530_set(priv, MT7530_PMCR_P(port), mask);
|
|
- else
|
|
- mt7530_clear(priv, MT7530_PMCR_P(port), mask);
|
|
-}
|
|
-
|
|
static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
@@ -672,7 +661,7 @@ mt7530_port_enable(struct dsa_switch *ds
|
|
priv->ports[port].enable = true;
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
priv->ports[port].pm);
|
|
- mt7530_port_set_status(priv, port, 0);
|
|
+ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
@@ -695,7 +684,7 @@ mt7530_port_disable(struct dsa_switch *d
|
|
priv->ports[port].enable = false;
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
PCR_MATRIX_CLR);
|
|
- mt7530_port_set_status(priv, port, 0);
|
|
+ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
@@ -1405,8 +1394,7 @@ static void mt7530_phylink_mac_config(st
|
|
|
|
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
|
|
mcr_new = mcr_cur;
|
|
- mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 |
|
|
- PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN);
|
|
+ mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
|
|
mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
|
|
PMCR_BACKPR_EN | PMCR_FORCE_MODE;
|
|
|
|
@@ -1414,26 +1402,6 @@ static void mt7530_phylink_mac_config(st
|
|
if (port == 5 && dsa_is_user_port(ds, 5))
|
|
mcr_new |= PMCR_EXT_PHY;
|
|
|
|
- switch (state->speed) {
|
|
- case SPEED_1000:
|
|
- mcr_new |= PMCR_FORCE_SPEED_1000;
|
|
- if (priv->eee_enable & BIT(port))
|
|
- mcr_new |= PMCR_FORCE_EEE1G;
|
|
- break;
|
|
- case SPEED_100:
|
|
- mcr_new |= PMCR_FORCE_SPEED_100;
|
|
- if (priv->eee_enable & BIT(port))
|
|
- mcr_new |= PMCR_FORCE_EEE100;
|
|
- break;
|
|
- }
|
|
- if (state->duplex == DUPLEX_FULL) {
|
|
- mcr_new |= PMCR_FORCE_FDX;
|
|
- if (state->pause & MLO_PAUSE_TX)
|
|
- mcr_new |= PMCR_TX_FC_EN;
|
|
- if (state->pause & MLO_PAUSE_RX)
|
|
- mcr_new |= PMCR_RX_FC_EN;
|
|
- }
|
|
-
|
|
if (mcr_new != mcr_cur)
|
|
mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
|
|
}
|
|
@@ -1444,7 +1412,7 @@ static void mt7530_phylink_mac_link_down
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
- mt7530_port_set_status(priv, port, 0);
|
|
+ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
|
|
}
|
|
|
|
static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
|
|
@@ -1455,8 +1423,31 @@ static void mt7530_phylink_mac_link_up(s
|
|
bool tx_pause, bool rx_pause)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
+ u32 mcr;
|
|
+
|
|
+ mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
|
|
+
|
|
+ switch (speed) {
|
|
+ case SPEED_1000:
|
|
+ mcr |= PMCR_FORCE_SPEED_1000;
|
|
+ if (priv->eee_enable & BIT(port))
|
|
+ mcr_new |= PMCR_FORCE_EEE1G;
|
|
+ break;
|
|
+ case SPEED_100:
|
|
+ mcr |= PMCR_FORCE_SPEED_100;
|
|
+ if (priv->eee_enable & BIT(port))
|
|
+ mcr_new |= PMCR_FORCE_EEE100;
|
|
+ break;
|
|
+ }
|
|
+ if (duplex == DUPLEX_FULL) {
|
|
+ mcr |= PMCR_FORCE_FDX;
|
|
+ if (tx_pause)
|
|
+ mcr |= PMCR_TX_FC_EN;
|
|
+ if (rx_pause)
|
|
+ mcr |= PMCR_RX_FC_EN;
|
|
+ }
|
|
|
|
- mt7530_port_set_status(priv, port, 1);
|
|
+ mt7530_set(priv, MT7530_PMCR_P(port), mcr);
|
|
}
|
|
|
|
static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
|
|
--- a/drivers/net/dsa/mt7530.h
|
|
+++ b/drivers/net/dsa/mt7530.h
|
|
@@ -222,6 +222,10 @@ enum mt7530_vlan_port_attr {
|
|
#define PMCR_FORCE_LNK BIT(0)
|
|
#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
|
|
PMCR_FORCE_SPEED_1000)
|
|
+#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
|
|
+ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
|
|
+ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
|
|
+ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
|
|
|
|
#define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
|
|
#define PMSR_EEE1G BIT(7)
|