mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
7e85c30938
Drop kmod-ledtrig-default-on and kmod-ledtrig-netdev as the kmod were dropped and are now enabled by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
574 lines
16 KiB
Makefile
574 lines
16 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2013 OpenWrt.org
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Image/Prepare
|
|
rm -f $(KDIR)/fs_mark
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
|
|
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
|
|
|
|
# For UBI we want only one extra block
|
|
rm -f $(KDIR)/ubi_mark
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
|
|
endef
|
|
|
|
define Build/lzma-d16
|
|
$(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# Similar to Build/tplink-safeloader but uses TRX instead of clean kernel
|
|
define Build/bcm53xx-tplink-safeloader
|
|
$(STAGING_DIR_HOST)/bin/trx \
|
|
-o $@.trx \
|
|
-m 33554432 \
|
|
-f $(IMAGE_KERNEL) -a 1024
|
|
$(STAGING_DIR_HOST)/bin/tplink-safeloader \
|
|
-B $(TPLINK_BOARD) \
|
|
-k $@.trx \
|
|
-r $@ \
|
|
-j \
|
|
-o $@.new
|
|
mv $@.new $@
|
|
rm $@.trx
|
|
endef
|
|
|
|
define Build/buffalo-wzr-header
|
|
$(eval product=$(word 1,$(1)))
|
|
$(eval region=$(word 2,$(1)))
|
|
( \
|
|
echo $(product)_$(BUFFALO_TAG_VERSION)_$(BUFFALO_TAG_MINOR)_$(region)_$(BUFFALO_TAG_PLATFORM); \
|
|
echo filelen=$$(stat -c%s $@); \
|
|
cat $@ \
|
|
) > $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# TRX with only one (kernel) partition
|
|
define Build/trx
|
|
$(STAGING_DIR_HOST)/bin/trx \
|
|
-o $@.new \
|
|
-m 33554432 \
|
|
-f $@
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/trx-serial
|
|
$(STAGING_DIR_HOST)/bin/otrx create $@.new \
|
|
-f $(IMAGE_KERNEL) -a 1024 \
|
|
-f $@ -a 0x10000 -A $(KDIR)/fs_mark
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/trx-nand
|
|
# kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
|
|
# if it grows up between releases
|
|
# root: UBI with one extra block containing UBI mark to trigger erasing
|
|
# rest of partition
|
|
$(STAGING_DIR_HOST)/bin/otrx create $@.new \
|
|
-f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
|
|
-f $@ \
|
|
-A $(KDIR)/ubi_mark -a 0x20000
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/asus-trx
|
|
$(STAGING_DIR_HOST)/bin/asustrx \
|
|
-p $(ASUS_PRODUCTID) -i $@ -o $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/luxul-lxl
|
|
$(STAGING_DIR_HOST)/bin/lxlfw create $@.new \
|
|
-i $@ \
|
|
-b $(LUXUL_BOARD)
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# Outputs a lzma compressed U-Boot that start at 0x00008000
|
|
# just like the D-Link boot loaders expect
|
|
define Build/dlink-uboot-bin
|
|
$(STAGING_DIR_HOST)/bin/lzma e $(STAGING_DIR_IMAGE)/$(DEVICE_NAME)-u-boot.bin -d16 $@
|
|
endef
|
|
|
|
define Build/seama-nand
|
|
# Seama entity
|
|
$(STAGING_DIR_HOST)/bin/oseama \
|
|
entity $@.entity \
|
|
-m "dev=/dev/mtdblock/7" \
|
|
-m "type=firmware" \
|
|
-f $(IMAGE_KERNEL) \
|
|
-b 0x400000 \
|
|
-f $@ \
|
|
-f $(KDIR)/ubi_mark
|
|
# Seama container
|
|
$(STAGING_DIR_HOST)/bin/seama \
|
|
-s $@ \
|
|
-m "signature=$(SIGNATURE)" \
|
|
-i $@.entity
|
|
endef
|
|
|
|
define Build/dwl8610ap-image
|
|
mkdir -p $@.tmptar
|
|
# The DWL8610AP pretends to be a Broadcom reference design
|
|
echo "bcm953012er" > $@.tmptar/board
|
|
echo "LVL7" > $@.tmptar/model
|
|
# Something high beyond what D-Link has put out
|
|
echo "5.0.0.0" > $@.tmptar/version
|
|
# Create rootfs.bin, this is just a NAND image including everything
|
|
cp $@ $@.tmptar/rootfs.bin
|
|
# Hash the rootfs.bin
|
|
cat $@.tmptar/rootfs.bin | md5sum > $@.tmptar/rootfs.md5
|
|
cd $@.tmptar && tar -c -f $@.new *
|
|
rm -rf $@.tmptar
|
|
mv $@.new $@
|
|
endef
|
|
|
|
DTS_DIR := $(DTS_DIR)/broadcom
|
|
|
|
DEVICE_VARS += ASUS_PRODUCTID
|
|
DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
|
|
DEVICE_VARS += SIGNATURE
|
|
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD
|
|
DEVICE_VARS += LUXUL_BOARD
|
|
|
|
IEEE8021X := wpad-basic-mbedtls
|
|
B43 := $(IEEE8021X) kmod-b43
|
|
BRCMFMAC_43602A1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-43602a1-pcie
|
|
BRCMFMAC_4366B1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366b1-pcie
|
|
BRCMFMAC_4366C0 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366c0-pcie
|
|
USB2_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2
|
|
USB2_PACKAGES += kmod-usb-ledtrig-usbport
|
|
USB3_PACKAGES := $(USB2_PACKAGES) kmod-usb3 kmod-phy-bcm-ns-usb3
|
|
|
|
define Device/Default
|
|
PROFILES = Generic $$(DEVICE_NAME)
|
|
# .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
|
|
# extract the full dtb name based on the device info
|
|
DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(subst _,-,$(1)).dtb)))
|
|
KERNEL := kernel-bin | append-dtb | lzma-d16
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_SUFFIX := .trx
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16 | trx
|
|
FILESYSTEMS := squashfs
|
|
KERNEL_NAME := zImage
|
|
DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(1).$$(2)
|
|
IMAGES := trx
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE/trx := append-ubi | trx-nand
|
|
endef
|
|
|
|
define Device/asus
|
|
DEVICE_VENDOR := ASUS
|
|
IMAGES := trx
|
|
IMAGE/trx := append-ubi | trx-nand | asus-trx
|
|
endef
|
|
|
|
define Device/asus_rt-ac3100
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC3100
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC3100
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac3100
|
|
|
|
define Device/asus_rt-ac56u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC56U
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC56U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac56u
|
|
|
|
define Device/asus_rt-ac68u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC68U
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC68U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac68u
|
|
|
|
define Device/asus_rt-ac87u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC87U
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC87U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac87u
|
|
|
|
define Device/asus_rt-ac88u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC88U
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC88U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac88u
|
|
|
|
define Device/asus_rt-n18u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-N18U
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-N18U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-n18u
|
|
|
|
# Buffalo devices have TFTP recovery mode which can work nicely with initramfs
|
|
# kernels.
|
|
# We should have two initramfs images for Buffalo: plain initramfs kernel and
|
|
# TRX with initramfs kernel. It's not possible right now so let's just build
|
|
# plain initramfs kernel as it may be more useful.
|
|
define Device/buffalo/Default
|
|
DEVICE_VENDOR := Buffalo
|
|
KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX)
|
|
KERNEL_INITRAMFS = $$(KERNEL)
|
|
endef
|
|
|
|
define Device/buffalo_wxr-1900dhp
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WXR-1900DHP
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-1900dhp
|
|
|
|
define Device/buffalo_wzr-600dhp2
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WZR-600DHP2
|
|
DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-600dhp2
|
|
|
|
define Device/buffalo_wzr-900dhp
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WZR-900DHP
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
BUFFALO_TAG_PLATFORM := bcm
|
|
BUFFALO_TAG_VERSION := 9.99
|
|
BUFFALO_TAG_MINOR := 9.99
|
|
IMAGES += factory-DHP-EU.bin factory-DHP2-JP.bin
|
|
IMAGE/factory-DHP-EU.bin := \
|
|
append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP EU | \
|
|
buffalo-enc WZR-900DHP $$(BUFFALO_TAG_VERSION) | \
|
|
buffalo-tag-dhp WZR-900DHP EU mlang20 | buffalo-enc-tag | \
|
|
buffalo-dhp-image
|
|
IMAGE/factory-DHP2-JP.bin := \
|
|
append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP2 JP | \
|
|
buffalo-enc WZR-900DHP2 $$(BUFFALO_TAG_VERSION) | \
|
|
buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \
|
|
buffalo-dhp-image
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-900dhp
|
|
|
|
define Device/buffalo_wzr-1750dhp
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WZR-1750DHP
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-1750dhp
|
|
|
|
define Device/dlink
|
|
DEVICE_VENDOR := D-Link
|
|
IMAGES := bin
|
|
IMAGE/bin := append-ubi | seama-nand
|
|
endef
|
|
|
|
define Device/dlink_dir-885l
|
|
DEVICE_MODEL := DIR-885L
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
|
|
$(Device/dlink)
|
|
SIGNATURE := wrgac42_dlink.2015_dir885l
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-885l
|
|
|
|
define Device/dlink_dir-890l
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-890L
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB2_PACKAGES) $(USB3_PACKAGES)
|
|
# Layout: U-boot (128kb max) followed by kernel and appended DTB.
|
|
# This is done because the boot loader will only read the first 2 MB
|
|
# from the flash and decompress the LZMA it finds there after the
|
|
# SEAMA header. Since the compressed kernel will not fit in 2 MB,
|
|
# we put U-Boot there and let U-Boot read and execute the kernel.
|
|
KERNEL := dlink-uboot-bin | pad-to 128k | append-kernel | append-dtb
|
|
$(Device/dlink)
|
|
SIGNATURE := wrgac36_dlink.2013gui_dir890
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-890l
|
|
|
|
define Device/dlink_dwl-8610ap
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWL-8610AP
|
|
DEVICE_PACKAGES := $(B43)
|
|
IMAGES := factory.tar
|
|
IMAGE/factory.tar := append-ubi | trx-nand | dwl8610ap-image
|
|
endef
|
|
TARGET_DEVICES += dlink_dwl-8610ap
|
|
|
|
define Device/linksys_ea6300-v1
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA6300
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += linksys_ea6300-v1
|
|
|
|
define Device/linksys_ea6500-v2
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA6500
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += linksys_ea6500-v2
|
|
|
|
define Device/linksys_ea9200
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA9200
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += linksys_ea9200
|
|
|
|
define Device/linksys_ea9500
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA9500
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
DEVICE_DTS := bcm47094-linksys-panamera
|
|
endef
|
|
TARGET_DEVICES += linksys_ea9500
|
|
|
|
define Device/luxul
|
|
DEVICE_VENDOR := Luxul
|
|
IMAGES := lxl
|
|
IMAGE/lxl := append-ubi | trx-nand | luxul-lxl
|
|
endef
|
|
|
|
define Device/luxul_abr-4500
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := ABR-4500
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
LUXUL_BOARD := ABR-4500
|
|
endef
|
|
TARGET_DEVICES += luxul_abr-4500
|
|
|
|
define Device/luxul_xap-1610
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := XAP-1610
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0)
|
|
IMAGE/lxl := append-rootfs | trx-serial | luxul-lxl
|
|
LUXUL_BOARD := XAP-1610
|
|
endef
|
|
TARGET_DEVICES += luxul_xap-1610
|
|
|
|
define Device/luxul_xbr-4500
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := XBR-4500
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
LUXUL_BOARD := XBR-4500
|
|
endef
|
|
TARGET_DEVICES += luxul_xbr-4500
|
|
|
|
define Device/luxul_xwr-3150
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := XWR-3150
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
DEVICE_DTS := bcm47094-luxul-xwr-3150-v1
|
|
LUXUL_BOARD := XWR-3150
|
|
endef
|
|
TARGET_DEVICES += luxul_xwr-3150
|
|
|
|
define Device/meraki_mr26
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR26
|
|
DEVICE_PACKAGES := $(B43) kmod-hwmon-ina2xx kmod-leds-uleds nu801
|
|
DEVICE_DTS := bcm53015-meraki-mr26
|
|
# resize the initramfs to fit the size of the existing part.safe.
|
|
KERNEL_LOADADDR := 0x00008000
|
|
KERNEL_INITRAMFS_SUFFIX := .bin
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | uImage gzip | pad-to 9310208
|
|
# LZMA is not supported by the uboot
|
|
KERNEL := kernel-bin | append-dtb | gzip | uImage gzip
|
|
IMAGES += sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += meraki_mr26
|
|
|
|
define Device/meraki_mr32
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR32
|
|
DEVICE_PACKAGES := $(B43) kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth
|
|
DEVICE_DTS := bcm53016-meraki-mr32
|
|
# Meraki FW r23 tries to resize the part.safe partition before it will
|
|
# flash the image. This is a bit of a problem, since resizing will fail
|
|
# if the partition is smaller than the old one.
|
|
KERNEL_LOADADDR := 0x00008000
|
|
KERNEL_INITRAMFS_SUFFIX := .bin
|
|
DEVICE_DTS_DELIMITER := @
|
|
DEVICE_DTS_CONFIG := config@1
|
|
KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | \
|
|
pad-to 10362880
|
|
KERNEL := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
IMAGES += sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
|
|
# The loader is specifically looking for fdt@2:
|
|
# [ 3.190000] find_itb_subimage: error finding fdt@2: FDT_ERR_NOTFOUND
|
|
# The image won't boot, if it isn't found. :(
|
|
DEVICE_FDT_NUM := 2
|
|
endef
|
|
TARGET_DEVICES += meraki_mr32
|
|
|
|
define Device/meraki_mx6x
|
|
KERNEL_IN_UBI := 1
|
|
KERNEL_LOADADDR := 0x60008000
|
|
DEVICE_PACKAGES := -oseama kmod-leds-pwm kmod-usb-ehci \
|
|
kmod-usb-ohci kmod-usb2
|
|
DEVICE_VENDOR := Cisco Meraki
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_INITRAMFS_SUFFIX := .bin
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/meraki_mx64
|
|
$(call Device/meraki_mx6x)
|
|
DEVICE_MODEL := MX64
|
|
DEVICE_DTS_CONFIG := config@4
|
|
DEVICE_DTS := bcm958625-meraki-mx64
|
|
endef
|
|
TARGET_DEVICES += meraki_mx64
|
|
|
|
define Device/meraki_mx64_a0
|
|
$(call Device/meraki_mx64)
|
|
DEVICE_VARIANT := A0
|
|
DEVICE_DTS_CONFIG := config@2
|
|
DEVICE_DTS := bcm958625-meraki-mx64-a0
|
|
endef
|
|
TARGET_DEVICES += meraki_mx64_a0
|
|
|
|
define Device/meraki_mx65
|
|
$(call Device/meraki_mx6x)
|
|
DEVICE_MODEL := MX65
|
|
DEVICE_DTS_CONFIG := config@3
|
|
DEVICE_DTS := bcm958625-meraki-mx65
|
|
endef
|
|
TARGET_DEVICES += meraki_mx65
|
|
|
|
define Device/netgear
|
|
DEVICE_VENDOR := NETGEAR
|
|
IMAGES := chk
|
|
IMAGE/chk := append-ubi | trx-nand | netgear-chk
|
|
NETGEAR_REGION := 1
|
|
endef
|
|
|
|
define Device/netgear_r6250
|
|
DEVICE_MODEL := R6250
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H245T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r6250
|
|
|
|
define Device/netgear_r6300-v2
|
|
DEVICE_MODEL := R6300
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H240T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r6300-v2
|
|
|
|
define Device/netgear_r7000
|
|
DEVICE_MODEL := R7000
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H270T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r7000
|
|
|
|
define Device/netgear_r7900
|
|
DEVICE_MODEL := R7900
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H315T30_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r7900
|
|
|
|
define Device/netgear_r8000
|
|
DEVICE_MODEL := R8000
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H315T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r8000
|
|
|
|
define Device/netgear_r8500
|
|
DEVICE_MODEL := R8500
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H334T00_NETGEAR
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += netgear_r8500
|
|
|
|
define Device/smartrg_sr400ac
|
|
DEVICE_VENDOR := SmartRG
|
|
DEVICE_MODEL := SR400ac
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
IMAGES := trx
|
|
IMAGE/trx := append-rootfs | trx-serial
|
|
KERNEL_INITRAMFS_SUFFIX := .bin
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16
|
|
endef
|
|
TARGET_DEVICES += smartrg_sr400ac
|
|
|
|
define Device/phicomm_k3
|
|
DEVICE_VENDOR := PHICOMM
|
|
DEVICE_MODEL := K3
|
|
DEVICE_ALT0_VENDOR := Wavlink
|
|
DEVICE_ALT0_MODEL := QUANTUM DAX
|
|
DEVICE_ALT1_VENDOR := Wavlink
|
|
DEVICE_ALT1_MODEL := WL-WN538A8
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
IMAGES := trx
|
|
endef
|
|
TARGET_DEVICES += phicomm_k3
|
|
|
|
define Device/tenda_ac9
|
|
DEVICE_VENDOR := Tenda
|
|
DEVICE_MODEL := AC9
|
|
DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
|
|
IMAGES := trx
|
|
IMAGE/trx := append-rootfs | trx-serial
|
|
endef
|
|
TARGET_DEVICES += tenda_ac9
|
|
|
|
define Device/tplink_archer-c5-v2
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C5
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
|
|
IMAGES := bin
|
|
IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
|
|
TPLINK_BOARD := ARCHER-C5-V2
|
|
BROKEN := y
|
|
endef
|
|
#TARGET_DEVICES += tplink_archer-c5-v2
|
|
|
|
define Device/tplink_archer-c9-v1
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C9
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
IMAGES := bin
|
|
IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
|
|
TPLINK_BOARD := ARCHERC9
|
|
BROKEN := y
|
|
endef
|
|
#TARGET_DEVICES += tplink_archer-c9-v1
|
|
|
|
$(eval $(call BuildImage))
|