mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
34705946e2
Drop outdated and by now broken patchset originally supplied by Peter Oh in August 2018 but never merged upstream. Instead add the more promissing rework recently submitted by Markus Theil who picked up Peter's patchset, fixed and completed it and added support for HE (802.11ax) in mesh mode. This is only compile tested and needs some real-life testing. Fixes: FS#3214 Fixes:167028b750("hostapd: Update to version 2.9 (2019-08-08)") Fixes:0a3ec87a66("hostapd: update to latest Git hostap_2_9-1238-gdd2daf0848ed") Fixes:017320ead3("hostapd: bring back mesh patches") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
127 lines
4.6 KiB
Diff
127 lines
4.6 KiB
Diff
From d869c753b79a1423c2bd9b0afdfa0d89d55a930c Mon Sep 17 00:00:00 2001
|
|
From: Markus Theil <markus.theil@tu-ilmenau.de>
|
|
Date: Tue, 30 Jun 2020 13:53:18 +0200
|
|
Subject: [PATCH 02/19] mesh: fix channel init order, disable pri/sec channel
|
|
switch
|
|
|
|
wpa_supplicant_conf_ap_ht has to happen before hostapd_setup_interface
|
|
in order for its configuration settings to have effect on interface
|
|
configuration.
|
|
|
|
Disable primary and secondary channel switch because of missing tie
|
|
breaking rule/frames in mesh networks. A rather long comment about
|
|
this issue is placed in mesh.c in the corresponding place.
|
|
|
|
In consequence, remove mesh coex test, which contradicts this change.
|
|
|
|
I was not able to reproduce the memory corruption during
|
|
mesh_secure_ocv_mix_legacy, which lead to a revert of a similar patch
|
|
in the past.
|
|
|
|
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
|
|
---
|
|
tests/hwsim/test_wpas_mesh.py | 50 -----------------------------------
|
|
wpa_supplicant/mesh.c | 25 ++++++++++++++++--
|
|
2 files changed, 23 insertions(+), 52 deletions(-)
|
|
|
|
--- a/tests/hwsim/test_wpas_mesh.py
|
|
+++ b/tests/hwsim/test_wpas_mesh.py
|
|
@@ -933,56 +933,6 @@ def _test_wpas_mesh_open_5ghz(dev, apdev
|
|
dev[0].dump_monitor()
|
|
dev[1].dump_monitor()
|
|
|
|
-def test_wpas_mesh_open_5ghz_coex(dev, apdev):
|
|
- """Mesh network on 5 GHz band and 20/40 coex change"""
|
|
- try:
|
|
- _test_wpas_mesh_open_5ghz_coex(dev, apdev)
|
|
- finally:
|
|
- dev[0].request("MESH_GROUP_REMOVE " + dev[0].ifname)
|
|
- dev[1].request("MESH_GROUP_REMOVE " + dev[1].ifname)
|
|
- set_world_reg(apdev0=apdev[0], dev0=dev[0])
|
|
- dev[0].flush_scan_cache()
|
|
- dev[1].flush_scan_cache()
|
|
-
|
|
-def _test_wpas_mesh_open_5ghz_coex(dev, apdev):
|
|
- check_mesh_support(dev[0])
|
|
- subprocess.call(['iw', 'reg', 'set', 'US'])
|
|
-
|
|
- # Start a 20 MHz BSS on channel 40 that would be the secondary channel of
|
|
- # HT40+ mesh on channel 36.
|
|
- params = {"ssid": "test-ht40",
|
|
- "hw_mode": "a",
|
|
- "channel": "40",
|
|
- "country_code": "US"}
|
|
- hapd = hostapd.add_ap(apdev[0], params)
|
|
- bssid = hapd.own_addr()
|
|
-
|
|
- for i in range(2):
|
|
- for j in range(5):
|
|
- ev = dev[i].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=5)
|
|
- if ev is None:
|
|
- raise Exception("No regdom change event")
|
|
- if "alpha2=US" in ev:
|
|
- break
|
|
- dev[i].scan_for_bss(bssid, freq=5200)
|
|
- add_open_mesh_network(dev[i], freq="5180")
|
|
-
|
|
- check_mesh_joined_connected(dev)
|
|
-
|
|
- freq = dev[0].get_status_field("freq")
|
|
- if freq != "5200":
|
|
- raise Exception("Unexpected STATUS freq=" + freq)
|
|
- sig = dev[0].request("SIGNAL_POLL").splitlines()
|
|
- if "FREQUENCY=5200" not in sig:
|
|
- raise Exception("Unexpected SIGNAL_POLL output: " + str(sig))
|
|
-
|
|
- hapd.disable()
|
|
- dev[0].mesh_group_remove()
|
|
- dev[1].mesh_group_remove()
|
|
- check_mesh_group_removed(dev[0])
|
|
- check_mesh_group_removed(dev[1])
|
|
- dev[0].dump_monitor()
|
|
- dev[1].dump_monitor()
|
|
|
|
def test_wpas_mesh_open_ht40(dev, apdev):
|
|
"""Mesh and HT40 support difference"""
|
|
--- a/wpa_supplicant/mesh.c
|
|
+++ b/wpa_supplicant/mesh.c
|
|
@@ -363,6 +363,29 @@ static int wpa_supplicant_mesh_init(stru
|
|
conf->basic_rates[rate_len] = -1;
|
|
}
|
|
|
|
+ /* While it can enhance performance to switch the primary channel, which
|
|
+ * is also the secondary channel of another network at the same time),
|
|
+ * to the other primary channel, problems exist with this in mesh networks.
|
|
+ *
|
|
+ * Example with problems:
|
|
+ * - 3 mesh nodes M1-M3, freq (5200, 5180)
|
|
+ * - other node O1, e.g. AP mode, freq (5180, 5200),
|
|
+ * Locations: O1 M1 M2 M3
|
|
+ *
|
|
+ * M3 can only send frames to M1 over M2, no direct connection is possible
|
|
+ * Start O1, M1 and M3 first, M1 or O1 will switch channels to align with
|
|
+ * each other. M3 does not swap, because M1 or O1 cannot be reached.
|
|
+ * M2 is started afterwards and can either connect to M3 or M1 because of
|
|
+ * this primary secondary channel switch.
|
|
+ *
|
|
+ * Solutions: (1) central coordination -> not always possible
|
|
+ * (2) disable pri/sec channel switch in mesh networks
|
|
+ *
|
|
+ * In AP mode, when all nodes can work independently, this poses of course
|
|
+ * no problem, therefore disable it only in mesh mode.`*/
|
|
+ conf->no_pri_sec_switch = 1;
|
|
+ wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
|
|
+
|
|
if (wpa_drv_init_mesh(wpa_s)) {
|
|
wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
|
|
return -1;
|
|
@@ -374,8 +397,6 @@ static int wpa_supplicant_mesh_init(stru
|
|
return -1;
|
|
}
|
|
|
|
- wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
|
|
-
|
|
return 0;
|
|
out_free:
|
|
wpa_supplicant_mesh_deinit(wpa_s);
|