Martin Schiller ff3cfe0848 ltq-atm/ltq-ptm: re-enable/fix reset_ppe() functionality for VR9 ... This patch re-enables the reset_ppe() functionality for VR9 targets by using the new lantiq rcu subsystem. The reset sequence in the reset_ppe() function was taken from the ppa datapath driver of lantiq UGW 7.4.1. Additionally it adds the required reset definitions to the vr9 dtsi file. It also prepares the reset_ppe() function calls for the other lantiq targets. This feature is needed to be able to switch between ltq-atm/ltq-ptm driver in ATM/PTM Auto-Mode at runtime. Signed-off-by: Martin Schiller <ms@dev.tdt.de>		2019-03-10 16:49:31 +01:00
..
ase	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
base-files	lantiq: add support for AVM FRITZ!Box 7362 SL	2019-03-10 16:49:31 +01:00
falcon	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
files/firmware/lantiq	lantiq: rename gphy firmware	2018-02-20 19:25:17 +01:00
files-4.14/arch/mips/boot/dts	ltq-atm/ltq-ptm: re-enable/fix reset_ppe() functionality for VR9	2019-03-10 16:49:31 +01:00
image	lantiq: add support for AVM FRITZ!Box 7362 SL	2019-03-10 16:49:31 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.96	2019-01-28 18:17:32 +01:00
xrx200	lantiq-vdsl-fw: update to provide recent vectoring firmware	2018-06-15 12:45:37 +02:00
xway	lantiq: add support for FritzBox 7312	2018-07-18 19:17:46 +02:00
xway_legacy	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
config-4.14	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
Makefile	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00