mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
62b7f5931c
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry-picked from commit f07e572f64)
315 lines
8.4 KiB
Diff
315 lines
8.4 KiB
Diff
From 78d867300b5026ab31c9a3fbd37b6590b7940f66 Mon Sep 17 00:00:00 2001
|
|
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Date: Fri, 12 Jun 2020 15:53:49 +0200
|
|
Subject: [PATCH] media: i2c: imx290: Add support for 2 data lanes
|
|
|
|
Commit 97589ad61c730e0f486635c6c19fa25ab8e8f29d upstream.
|
|
|
|
The IMX290 sensor can output frames with 2/4 CSI2 data lanes. This commit
|
|
adds support for 2 lane mode in addition to the 4 lane and also
|
|
configuring the data lane settings in the driver based on system
|
|
configuration.
|
|
|
|
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
---
|
|
drivers/media/i2c/imx290.c | 147 +++++++++++++++++++++++++++++++++----
|
|
1 file changed, 133 insertions(+), 14 deletions(-)
|
|
|
|
--- a/drivers/media/i2c/imx290.c
|
|
+++ b/drivers/media/i2c/imx290.c
|
|
@@ -25,7 +25,12 @@
|
|
#define IMX290_STANDBY 0x3000
|
|
#define IMX290_REGHOLD 0x3001
|
|
#define IMX290_XMSTA 0x3002
|
|
+#define IMX290_FR_FDG_SEL 0x3009
|
|
#define IMX290_GAIN 0x3014
|
|
+#define IMX290_HMAX_LOW 0x301c
|
|
+#define IMX290_HMAX_HIGH 0x301d
|
|
+#define IMX290_PHY_LANE_NUM 0x3407
|
|
+#define IMX290_CSI_LANE_MODE 0x3443
|
|
|
|
#define IMX290_DEFAULT_LINK_FREQ 445500000
|
|
|
|
@@ -45,6 +50,7 @@ struct imx290_regval {
|
|
struct imx290_mode {
|
|
u32 width;
|
|
u32 height;
|
|
+ u32 hmax;
|
|
u32 pixel_rate;
|
|
u32 link_freq_index;
|
|
|
|
@@ -56,6 +62,7 @@ struct imx290 {
|
|
struct device *dev;
|
|
struct clk *xclk;
|
|
struct regmap *regmap;
|
|
+ u8 nlanes;
|
|
|
|
struct v4l2_subdev sd;
|
|
struct v4l2_fwnode_endpoint ep;
|
|
@@ -89,14 +96,11 @@ static const struct regmap_config imx290
|
|
|
|
static const struct imx290_regval imx290_global_init_settings[] = {
|
|
{ 0x3007, 0x00 },
|
|
- { 0x3009, 0x00 },
|
|
{ 0x3018, 0x65 },
|
|
{ 0x3019, 0x04 },
|
|
{ 0x301a, 0x00 },
|
|
- { 0x3443, 0x03 },
|
|
{ 0x3444, 0x20 },
|
|
{ 0x3445, 0x25 },
|
|
- { 0x3407, 0x03 },
|
|
{ 0x303a, 0x0c },
|
|
{ 0x3040, 0x00 },
|
|
{ 0x3041, 0x00 },
|
|
@@ -169,7 +173,6 @@ static const struct imx290_regval imx290
|
|
{ 0x3164, 0x1a },
|
|
{ 0x3480, 0x49 },
|
|
/* data rate settings */
|
|
- { 0x3009, 0x01 },
|
|
{ 0x3405, 0x10 },
|
|
{ 0x3446, 0x57 },
|
|
{ 0x3447, 0x00 },
|
|
@@ -187,8 +190,6 @@ static const struct imx290_regval imx290
|
|
{ 0x3453, 0x00 },
|
|
{ 0x3454, 0x17 },
|
|
{ 0x3455, 0x00 },
|
|
- { 0x301c, 0x98 },
|
|
- { 0x301d, 0x08 },
|
|
};
|
|
|
|
static const struct imx290_regval imx290_720p_settings[] = {
|
|
@@ -210,7 +211,6 @@ static const struct imx290_regval imx290
|
|
{ 0x3164, 0x1a },
|
|
{ 0x3480, 0x49 },
|
|
/* data rate settings */
|
|
- { 0x3009, 0x01 },
|
|
{ 0x3405, 0x10 },
|
|
{ 0x3446, 0x4f },
|
|
{ 0x3447, 0x00 },
|
|
@@ -228,8 +228,6 @@ static const struct imx290_regval imx290
|
|
{ 0x3453, 0x00 },
|
|
{ 0x3454, 0x17 },
|
|
{ 0x3455, 0x00 },
|
|
- { 0x301c, 0xe4 },
|
|
- { 0x301d, 0x0c },
|
|
};
|
|
|
|
static const struct imx290_regval imx290_10bit_settings[] = {
|
|
@@ -250,10 +248,11 @@ static const s64 imx290_link_freq[] = {
|
|
};
|
|
|
|
/* Mode configs */
|
|
-static const struct imx290_mode imx290_modes[] = {
|
|
+static const struct imx290_mode imx290_modes_2lanes[] = {
|
|
{
|
|
.width = 1920,
|
|
.height = 1080,
|
|
+ .hmax = 0x1130,
|
|
.data = imx290_1080p_settings,
|
|
.data_size = ARRAY_SIZE(imx290_1080p_settings),
|
|
.pixel_rate = 178200000,
|
|
@@ -262,6 +261,7 @@ static const struct imx290_mode imx290_m
|
|
{
|
|
.width = 1280,
|
|
.height = 720,
|
|
+ .hmax = 0x19c8,
|
|
.data = imx290_720p_settings,
|
|
.data_size = ARRAY_SIZE(imx290_720p_settings),
|
|
.pixel_rate = 178200000,
|
|
@@ -269,6 +269,44 @@ static const struct imx290_mode imx290_m
|
|
},
|
|
};
|
|
|
|
+static const struct imx290_mode imx290_modes_4lanes[] = {
|
|
+ {
|
|
+ .width = 1920,
|
|
+ .height = 1080,
|
|
+ .hmax = 0x0898,
|
|
+ .data = imx290_1080p_settings,
|
|
+ .data_size = ARRAY_SIZE(imx290_1080p_settings),
|
|
+ .pixel_rate = 178200000,
|
|
+ .link_freq_index = 0,
|
|
+ },
|
|
+ {
|
|
+ .width = 1280,
|
|
+ .height = 720,
|
|
+ .hmax = 0x0ce4,
|
|
+ .data = imx290_720p_settings,
|
|
+ .data_size = ARRAY_SIZE(imx290_720p_settings),
|
|
+ .pixel_rate = 178200000,
|
|
+ .link_freq_index = 0,
|
|
+ },
|
|
+};
|
|
+
|
|
+static inline const struct imx290_mode *imx290_modes_ptr(const struct imx290 *imx290)
|
|
+{
|
|
+ /* We rely on imx290_probe() to ensure that nlanes is either 2 or 4 */
|
|
+ if (imx290->nlanes == 2)
|
|
+ return imx290_modes_2lanes;
|
|
+ else
|
|
+ return imx290_modes_4lanes;
|
|
+}
|
|
+
|
|
+static inline int imx290_modes_num(const struct imx290 *imx290)
|
|
+{
|
|
+ if (imx290->nlanes == 2)
|
|
+ return ARRAY_SIZE(imx290_modes_2lanes);
|
|
+ else
|
|
+ return ARRAY_SIZE(imx290_modes_4lanes);
|
|
+}
|
|
+
|
|
static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
|
|
{
|
|
return container_of(_sd, struct imx290, sd);
|
|
@@ -450,9 +488,8 @@ static int imx290_set_fmt(struct v4l2_su
|
|
|
|
mutex_lock(&imx290->lock);
|
|
|
|
- mode = v4l2_find_nearest_size(imx290_modes,
|
|
- ARRAY_SIZE(imx290_modes),
|
|
- width, height,
|
|
+ mode = v4l2_find_nearest_size(imx290_modes_ptr(imx290),
|
|
+ imx290_modes_num(imx290), width, height,
|
|
fmt->format.width, fmt->format.height);
|
|
|
|
fmt->format.width = mode->width;
|
|
@@ -522,6 +559,25 @@ static int imx290_write_current_format(s
|
|
return 0;
|
|
}
|
|
|
|
+static int imx290_set_hmax(struct imx290 *imx290, u32 val)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = imx290_write_reg(imx290, IMX290_HMAX_LOW, (val & 0xff));
|
|
+ if (ret) {
|
|
+ dev_err(imx290->dev, "Error setting HMAX register\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ ret = imx290_write_reg(imx290, IMX290_HMAX_HIGH, ((val >> 8) & 0xff));
|
|
+ if (ret) {
|
|
+ dev_err(imx290->dev, "Error setting HMAX register\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
/* Start streaming */
|
|
static int imx290_start_streaming(struct imx290 *imx290)
|
|
{
|
|
@@ -550,6 +606,9 @@ static int imx290_start_streaming(struct
|
|
dev_err(imx290->dev, "Could not set current mode\n");
|
|
return ret;
|
|
}
|
|
+ ret = imx290_set_hmax(imx290, imx290->current_mode->hmax);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
|
|
/* Apply customized values from user */
|
|
ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
|
|
@@ -607,6 +666,49 @@ static int imx290_get_regulators(struct
|
|
imx290->supplies);
|
|
}
|
|
|
|
+static int imx290_set_data_lanes(struct imx290 *imx290)
|
|
+{
|
|
+ int ret = 0, laneval, frsel;
|
|
+
|
|
+ switch (imx290->nlanes) {
|
|
+ case 2:
|
|
+ laneval = 0x01;
|
|
+ frsel = 0x02;
|
|
+ break;
|
|
+ case 4:
|
|
+ laneval = 0x03;
|
|
+ frsel = 0x01;
|
|
+ break;
|
|
+ default:
|
|
+ /*
|
|
+ * We should never hit this since the data lane count is
|
|
+ * validated in probe itself
|
|
+ */
|
|
+ dev_err(imx290->dev, "Lane configuration not supported\n");
|
|
+ ret = -EINVAL;
|
|
+ goto exit;
|
|
+ }
|
|
+
|
|
+ ret = imx290_write_reg(imx290, IMX290_PHY_LANE_NUM, laneval);
|
|
+ if (ret) {
|
|
+ dev_err(imx290->dev, "Error setting Physical Lane number register\n");
|
|
+ goto exit;
|
|
+ }
|
|
+
|
|
+ ret = imx290_write_reg(imx290, IMX290_CSI_LANE_MODE, laneval);
|
|
+ if (ret) {
|
|
+ dev_err(imx290->dev, "Error setting CSI Lane mode register\n");
|
|
+ goto exit;
|
|
+ }
|
|
+
|
|
+ ret = imx290_write_reg(imx290, IMX290_FR_FDG_SEL, frsel);
|
|
+ if (ret)
|
|
+ dev_err(imx290->dev, "Error setting FR/FDG SEL register\n");
|
|
+
|
|
+exit:
|
|
+ return ret;
|
|
+}
|
|
+
|
|
static int imx290_power_on(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
@@ -631,6 +733,9 @@ static int imx290_power_on(struct device
|
|
gpiod_set_value_cansleep(imx290->rst_gpio, 0);
|
|
usleep_range(30000, 31000);
|
|
|
|
+ /* Set data lane count */
|
|
+ imx290_set_data_lanes(imx290);
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
@@ -677,6 +782,7 @@ static int imx290_probe(struct i2c_clien
|
|
struct fwnode_handle *endpoint;
|
|
struct imx290 *imx290;
|
|
u32 xclk_freq;
|
|
+ u32 default_pixel_rate;
|
|
int ret;
|
|
|
|
imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
|
|
@@ -703,6 +809,16 @@ static int imx290_probe(struct i2c_clien
|
|
goto free_err;
|
|
}
|
|
|
|
+ /* Get number of data lanes */
|
|
+ imx290->nlanes = imx290->ep.bus.mipi_csi2.num_data_lanes;
|
|
+ if (imx290->nlanes != 2 && imx290->nlanes != 4) {
|
|
+ dev_err(dev, "Invalid data lanes: %d\n", imx290->nlanes);
|
|
+ ret = -EINVAL;
|
|
+ goto free_err;
|
|
+ }
|
|
+
|
|
+ dev_dbg(dev, "Using %u data lanes\n", imx290->nlanes);
|
|
+
|
|
if (!imx290->ep.nr_of_link_frequencies) {
|
|
dev_err(dev, "link-frequency property not found in DT\n");
|
|
ret = -EINVAL;
|
|
@@ -780,10 +896,13 @@ static int imx290_probe(struct i2c_clien
|
|
if (imx290->link_freq)
|
|
imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
+ default_pixel_rate = imx290->nlanes == 2 ?
|
|
+ imx290_modes_2lanes[0].pixel_rate :
|
|
+ imx290_modes_4lanes[0].pixel_rate;
|
|
imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE, 1,
|
|
INT_MAX, 1,
|
|
- imx290_modes[0].pixel_rate);
|
|
+ default_pixel_rate);
|
|
|
|
imx290->sd.ctrl_handler = &imx290->ctrls;
|
|
|