mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
1c552eb44d
The MDIO bus is supported but there are errors when trying to probe and configure the external BCM5325E switch through B53 DSA. Therefore, let's add basic ethernet (but working) support for now. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
430 lines
8.3 KiB
Plaintext
430 lines
8.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/clock/bcm6358-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h>
|
|
#include <dt-bindings/reset/bcm6358-reset.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6358";
|
|
|
|
aliases {
|
|
pflash = &pflash;
|
|
pinctrl = &pinctrl;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
spi0 = &lsspi;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "periph";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
mips-hpt-frequency = <150000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
cpu_intc: interrupt-controller {
|
|
#address-cells = <0>;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
pflash: nor@1e000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x1e000000 0x2000000>;
|
|
bank-width = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ubus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
|
|
periph_clk: clock-controller@fffe0004 {
|
|
compatible = "brcm,bcm6358-clocks";
|
|
reg = <0xfffe0004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pll_cntl: syscon@fffe0008 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0xfffe0008 0x4>;
|
|
native-endian;
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
};
|
|
|
|
periph_intc: interrupt-controller@fffe000c {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-l1-intc";
|
|
reg = <0xfffe000c 0x8>,
|
|
<0xfffe0038 0x8>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>, <3>;
|
|
};
|
|
|
|
ext_intc0: interrupt-controller@fffe0014 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0xfffe0014 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_EXT0>,
|
|
<BCM6358_IRQ_EXT1>,
|
|
<BCM6358_IRQ_EXT2>,
|
|
<BCM6358_IRQ_EXT3>;
|
|
};
|
|
|
|
ext_intc1: interrupt-controller@fffe001c {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0xfffe001c 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_EXT4>,
|
|
<BCM6358_IRQ_EXT5>;
|
|
};
|
|
|
|
periph_rst: reset-controller@fffe0034 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0xfffe0034 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
wdt: watchdog@fffe005c {
|
|
compatible = "brcm,bcm7038-wdt";
|
|
reg = <0xfffe005c 0xc>;
|
|
|
|
clocks = <&periph_osc>;
|
|
|
|
timeout-sec = <30>;
|
|
};
|
|
|
|
gpio_cntl: syscon@fffe0080 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6358-gpio-sysctl",
|
|
"syscon", "simple-mfd";
|
|
reg = <0xfffe0080 0x50>;
|
|
ranges = <0 0xfffe0080 0x80>;
|
|
native-endian;
|
|
|
|
gpio: gpio@0 {
|
|
compatible = "brcm,bcm6358-gpio";
|
|
reg-names = "dirout", "dat";
|
|
reg = <0x0 0x8>, <0x8 0x8>;
|
|
|
|
gpio-controller;
|
|
gpio-ranges = <&pinctrl 0 0 40>;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
pinctrl: pinctrl@18 {
|
|
compatible = "brcm,bcm6358-pinctrl";
|
|
reg = <0x18 0x4>;
|
|
|
|
pinctrl_ebi_cs: ebi_cs-pins {
|
|
function = "ebi_cs";
|
|
groups = "ebi_cs_grp";
|
|
};
|
|
|
|
pinctrl_uart1: uart1-pins {
|
|
function = "uart1";
|
|
groups = "uart1_grp";
|
|
};
|
|
|
|
pinctrl_serial_led: serial_led-pins {
|
|
function = "serial_led";
|
|
groups = "serial_led_grp";
|
|
};
|
|
|
|
pinctrl_legacy_led: legacy_led-pins {
|
|
function = "legacy_led";
|
|
groups = "legacy_led_grp";
|
|
};
|
|
|
|
pinctrl_led: led-pins {
|
|
function = "led";
|
|
groups = "led_grp";
|
|
};
|
|
|
|
pinctrl_spi_cs_23: spi_cs-pins {
|
|
function = "spi_cs";
|
|
groups = "spi_cs_grp";
|
|
};
|
|
|
|
pinctrl_utopia: utopia-pins {
|
|
function = "utopia";
|
|
groups = "utopia_grp";
|
|
};
|
|
|
|
pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
|
|
function = "pwm_syn_clk";
|
|
groups = "pwm_syn_clk_grp";
|
|
};
|
|
|
|
pinctrl_sys_irq: sys_irq-pins {
|
|
function = "sys_irq";
|
|
groups = "sys_irq_grp";
|
|
};
|
|
};
|
|
};
|
|
|
|
leds: led-controller@fffe00d0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6358-leds";
|
|
reg = <0xfffe00d0 0x8>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@fffe0100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0xfffe0100 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_UART0>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@fffe0120 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0xfffe0120 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_UART1>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
lsspi: spi@fffe0800 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6358-spi";
|
|
reg = <0xfffe0800 0x70c>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_SPI>;
|
|
|
|
clocks = <&periph_clk BCM6358_CLK_SPI>;
|
|
clock-names = "spi";
|
|
|
|
resets = <&periph_rst BCM6358_RST_SPI>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pci: pci@fffe1000 {
|
|
compatible = "brcm,bcm6348-pci";
|
|
reg = <0xfffe1000 0x200>,
|
|
<0x08000000 0x10000>;
|
|
reg-names = "pci",
|
|
"pci-io";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
device_type = "pci";
|
|
bus-range = <0x00 0x01>;
|
|
ranges = <0x2000000 0 0x30000000 0x30000000 0 0x8000000>;
|
|
linux,pci-probe-only = <1>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_MPI>;
|
|
|
|
resets = <&periph_rst BCM6358_RST_MPI>;
|
|
reset-names = "pci";
|
|
|
|
brcm,remap;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: usb@fffe1300 {
|
|
compatible = "brcm,bcm6358-ehci", "generic-ehci";
|
|
reg = <0xfffe1300 0x100>;
|
|
big-endian;
|
|
spurious-oc;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_EHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb@fffe1400 {
|
|
compatible = "brcm,bcm6358-ohci", "generic-ohci";
|
|
reg = <0xfffe1400 0x100>;
|
|
big-endian;
|
|
no-big-frame-no;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_OHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@fffe1500 {
|
|
compatible = "brcm,bcm6358-usbh-phy";
|
|
reg = <0xfffe1500 0x38>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
resets = <&periph_rst BCM6358_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ethernet0: ethernet@fffe4000 {
|
|
compatible = "brcm,bcm6358-emac";
|
|
reg = <0xfffe4000 0x2dc>;
|
|
|
|
clocks = <&periph_clk BCM6358_CLK_ENET0>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_EMAC0>,
|
|
<BCM6358_IRQ_EMAC0_RX_DMA>,
|
|
<BCM6358_IRQ_EMAC0_TX_DMA>;
|
|
interrupt-names = "emac",
|
|
"rx",
|
|
"tx";
|
|
|
|
brcm,iudma = <&iudma>;
|
|
|
|
dma-rx = <0>;
|
|
dma-tx = <1>;
|
|
|
|
status = "disabled";
|
|
|
|
mdio0: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ethernet1: ethernet@fffe4800 {
|
|
compatible = "brcm,bcm6358-emac";
|
|
reg = <0xfffe4800 0x2dc>;
|
|
|
|
clocks = <&periph_clk BCM6358_CLK_ENET1>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_EMAC1>,
|
|
<BCM6358_IRQ_EMAC1_RX_DMA>,
|
|
<BCM6358_IRQ_EMAC1_TX_DMA>;
|
|
interrupt-names = "emac",
|
|
"rx",
|
|
"tx";
|
|
|
|
brcm,iudma = <&iudma>;
|
|
brcm,external-mii;
|
|
|
|
dma-rx = <2>;
|
|
dma-tx = <3>;
|
|
|
|
status = "disabled";
|
|
|
|
mdio1: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
iudma: dma@fffe5000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6358-iudma";
|
|
reg = <0xfffe5000 0x24>,
|
|
<0xfffe5100 0x80>,
|
|
<0xfffe5200 0x80>;
|
|
reg-names = "dma",
|
|
"dma-channels",
|
|
"dma-sram";
|
|
|
|
dma-channels = <8>;
|
|
|
|
clocks = <&periph_clk BCM6358_CLK_EMUSB>,
|
|
<&periph_clk BCM6358_CLK_USBSU>,
|
|
<&periph_clk BCM6358_CLK_EPHY>,
|
|
<&periph_clk BCM6358_CLK_ENET>;
|
|
|
|
resets = <&periph_rst BCM6358_RST_ENET>,
|
|
<&periph_rst BCM6358_RST_EPHY>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|