ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 17:18:59 +00:00
Code Issues Actions 9 Packages Projects Releases Wiki Activity
3c65c47ce6
openwrt/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c
Adrian Schmutzler 3c65c47ce6 ar71xx: fix LED setup for TL-WDR4900 v2 
In ar71xx there is only one combined mach file for Archer C5/C7 and
TL-WDR4900 v2. This one uses the same LED struct for all devices,
defining "green" LEDs for them. However, WDR4900 uses blue front
LEDs, while only C5/C7 uses green ones. Despite, in base-files
WDR4900 is actually set up with "blue" for the mentioned LEDs.

Thus, this patch creates a separate LED struct for WDR4900, so the
LEDs can be set up correctly. Despite, the wlan5g LED is removed as
it is controlled by ath9k chip for WDR4900 (in contrast to C5/C7).

Note: While front LEDs are blue, USB LEDs (on the back) are green,
so colors are mixed intentionally for the WDR4900 v2.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 93f2bcc35e)
2019-11-21 12:29:47 +01:00

339 lines
9.1 KiB
C
Raw Blame History

/*
* TP-LINK Archer C5/C7/TL-WDR4900 v2 board support
*
* Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2014 施康成 <tenninjas@tenninjas.ca>
* Copyright (c) 2014 Imre Kaloz <kaloz@openwrt.org>
*
* Based on the Qualcomm Atheros AP135/AP136 reference board support code
* Copyright (c) 2012 Qualcomm Atheros
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define ARCHER_C7_GPIO_LED_WLAN2G 12
#define ARCHER_C7_GPIO_LED_SYSTEM 14
#define ARCHER_C7_GPIO_LED_QSS 15
#define ARCHER_C7_GPIO_LED_WLAN5G 17
#define ARCHER_C7_GPIO_LED_USB1 18
#define ARCHER_C7_GPIO_LED_USB2 19
#define ARCHER_C7_GPIO_BTN_RFKILL 23
#define ARCHER_C7_V2_GPIO_BTN_RFKILL 23
#define ARCHER_C7_GPIO_BTN_RESET 16
#define ARCHER_C7_GPIO_USB1_POWER 22
#define ARCHER_C7_GPIO_USB2_POWER 21
#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C7_PCIE_CALDATA_OFFSET 0x5000
static const char *archer_c7_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data archer_c7_flash_data = {
.part_probes = archer_c7_part_probes,
};
static struct gpio_led archer_c7_leds_gpio[] __initdata = {
{
.name = "tp-link:green:qss",
.gpio = ARCHER_C7_GPIO_LED_QSS,
.active_low = 1,
},
{
.name = "tp-link:green:system",
.gpio = ARCHER_C7_GPIO_LED_SYSTEM,
.active_low = 1,
},
{
.name = "tp-link:green:wlan2g",
.gpio = ARCHER_C7_GPIO_LED_WLAN2G,
.active_low = 1,
},
{
.name = "tp-link:green:wlan5g",
.gpio = ARCHER_C7_GPIO_LED_WLAN5G,
.active_low = 1,
},
{
.name = "tp-link:green:usb1",
.gpio = ARCHER_C7_GPIO_LED_USB1,
.active_low = 1,
},
{
.name = "tp-link:green:usb2",
.gpio = ARCHER_C7_GPIO_LED_USB2,
.active_low = 1,
},
};
static struct gpio_led wdr4900_leds_gpio[] __initdata = {
{
.name = "tp-link:blue:qss",
.gpio = ARCHER_C7_GPIO_LED_QSS,
.active_low = 1,
},
{
.name = "tp-link:blue:system",
.gpio = ARCHER_C7_GPIO_LED_SYSTEM,
.active_low = 1,
},
{
.name = "tp-link:blue:wlan2g",
.gpio = ARCHER_C7_GPIO_LED_WLAN2G,
.active_low = 1,
},
{
.name = "tp-link:green:usb1",
.gpio = ARCHER_C7_GPIO_LED_USB1,
.active_low = 1,
},
{
.name = "tp-link:green:usb2",
.gpio = ARCHER_C7_GPIO_LED_USB2,
.active_low = 1,
},
};
static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C7_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL switch",
.type = EV_SW,
.code = KEY_RFKILL,
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C7_GPIO_BTN_RFKILL,
},
};
static struct gpio_keys_button archer_c7_v2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C7_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL switch",
.type = EV_SW,
.code = KEY_RFKILL,
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C7_V2_GPIO_BTN_RFKILL,
},
};
static const struct ar8327_led_info archer_c7_leds_ar8327[] = {
AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"),
AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"),
AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"),
AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"),
};
/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = {
.led_ctrl0 = 0xc737c737,
.led_ctrl1 = 0x00000000,
.led_ctrl2 = 0x00000000,
.led_ctrl3 = 0x0030c300,
.open_drain = false,
};
static struct ar8327_platform_data archer_c7_ar8327_data = {
.pad0_cfg = &archer_c7_ar8327_pad0_cfg,
.pad6_cfg = &archer_c7_ar8327_pad6_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.port6_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.led_cfg = &archer_c7_ar8327_led_cfg,
.num_leds = ARRAY_SIZE(archer_c7_leds_ar8327),
.leds = archer_c7_leds_ar8327,
};
static struct mdio_board_info archer_c7_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.mdio_addr = 0,
.platform_data = &archer_c7_ar8327_data,
},
};
static void __init common_setup(bool pcie_slot)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 tmpmac[ETH_ALEN];
u8 tmpmac2[ETH_ALEN];
ath79_register_m25p80(&archer_c7_flash_data);
if (pcie_slot) {
ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
ath79_register_pci();
} else {
ath79_init_mac(tmpmac, mac, -1);
ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac);
ath79_init_mac(tmpmac2, mac, -2);
ap9x_pci_setup_wmac_led_pin(0, 0);
ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac2);
}
mdiobus_register_board_info(archer_c7_mdio0_info,
ARRAY_SIZE(archer_c7_mdio0_info));
ath79_register_mdio(0, 0x0);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
/* GMAC0 is connected to the RMGII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x56000000;
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
ath79_register_eth(0);
/* GMAC1 is connected to the SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_pll_data.pll_1000 = 0x03000101;
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_register_eth(1);
gpio_request_one(ARCHER_C7_GPIO_USB1_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB1 power");
gpio_request_one(ARCHER_C7_GPIO_USB2_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB2 power");
ath79_register_usb();
}
static void __init archer_c5_setup(void)
{
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c7_gpio_keys),
archer_c7_gpio_keys);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
archer_c7_leds_gpio);
common_setup(true);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C5, "ARCHER-C5", "TP-LINK Archer C5",
archer_c5_setup);
static void __init archer_c7_setup(void)
{
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c7_gpio_keys),
archer_c7_gpio_keys);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
archer_c7_leds_gpio);
common_setup(true);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7",
archer_c7_setup);
static void __init archer_c7_v2_setup(void)
{
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c7_v2_gpio_keys),
archer_c7_v2_gpio_keys);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
archer_c7_leds_gpio);
common_setup(true);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V2, "ARCHER-C7-V2", "TP-LINK Archer C7",
archer_c7_v2_setup);
static void __init tl_wdr4900_v2_setup(void)
{
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c7_gpio_keys),
archer_c7_gpio_keys);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4900_leds_gpio),
wdr4900_leds_gpio);
common_setup(false);
}
MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2",
tl_wdr4900_v2_setup)
Reference in New Issue View Git Blame Copy Permalink