mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
40 lines
1.5 KiB
Diff
40 lines
1.5 KiB
Diff
From ea1e25b4c0a055b31a0217ffbfd6972c28643912 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Fri, 22 Nov 2019 15:08:25 +0000
|
|
Subject: [PATCH] arm/dts: Correct Pi 4B LED values
|
|
|
|
The initial PHY LED settings are wrong Pi 4B (the correct values got
|
|
dropped somewhere along the way). The PHY declaration should arguably
|
|
go in a separate file included by bcm2711-rpi-4-b.dts, but we can
|
|
fix that as we switch over to using more of the upstream BCM2711
|
|
support in 5.4 and later.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/bcm2838.dtsi | 2 +-
|
|
arch/arm/boot/dts/overlays/README | 2 +-
|
|
2 files changed, 2 insertions(+), 2 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm2838.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm2838.dtsi
|
|
@@ -380,7 +380,7 @@
|
|
/* No interrupts - use PHY_POLL */
|
|
max-speed = <1000>;
|
|
reg = <0x1>;
|
|
- led-modes = <0x02 0x02>;
|
|
+ led-modes = <0x00 0x08>; /* link/activity link */
|
|
};
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -128,7 +128,7 @@ Params:
|
|
8=Link 9=Activity
|
|
|
|
eth_led1 Set mode of LED1 (usually green) (Pi3B+ default
|
|
- "6", Pi4 default "0"). See eth_led0 for legal
|
|
+ "6", Pi4 default "8"). See eth_led0 for legal
|
|
values.
|
|
|
|
eth_max_speed Set the maximum speed a link is allowed
|