mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
97 lines
3.4 KiB
Diff
97 lines
3.4 KiB
Diff
From 05a13bbd7fbb76b4f690042173749a55d85de831 Mon Sep 17 00:00:00 2001
|
|
From: Ram Chandrasekar <rkumbako@codeaurora.org>
|
|
Date: Mon, 7 May 2018 11:54:08 -0600
|
|
Subject: [PATCH] drivers: thermal: step_wise: add support for
|
|
hysteresis
|
|
|
|
From: Ram Chandrasekar <rkumbako@codeaurora.org>
|
|
|
|
Step wise governor increases the mitigation level when the temperature
|
|
goes above a threshold and will decrease the mitigation when the
|
|
temperature falls below the threshold. If it were a case, where the
|
|
temperature hovers around a threshold, the mitigation will be applied
|
|
and removed at every iteration. This reaction to the temperature is
|
|
inefficient for performance.
|
|
|
|
The use of hysteresis temperature could avoid this ping-pong of
|
|
mitigation by relaxing the mitigation to happen only when the
|
|
temperature goes below this lower hysteresis value.
|
|
|
|
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
|
|
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
|
|
---
|
|
drivers/thermal/step_wise.c | 33 +++++++++++++++++++++++----------
|
|
1 file changed, 23 insertions(+), 10 deletions(-)
|
|
|
|
--- a/drivers/thermal/step_wise.c
|
|
+++ b/drivers/thermal/step_wise.c
|
|
@@ -36,7 +36,7 @@
|
|
* for this trip point
|
|
* d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
|
|
* for this trip point
|
|
- * If the temperature is lower than a trip point,
|
|
+ * If the temperature is lower than a hysteresis temperature,
|
|
* a. if the trend is THERMAL_TREND_RAISING, do nothing
|
|
* b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
|
|
* state for this trip point, if the cooling state already
|
|
@@ -127,7 +127,7 @@ static void update_passive_instance(stru
|
|
|
|
static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
|
|
{
|
|
- int trip_temp;
|
|
+ int trip_temp, hyst_temp;
|
|
enum thermal_trip_type trip_type;
|
|
enum thermal_trend trend;
|
|
struct thermal_instance *instance;
|
|
@@ -135,22 +135,23 @@ static void thermal_zone_trip_update(str
|
|
int old_target;
|
|
|
|
if (trip == THERMAL_TRIPS_NONE) {
|
|
- trip_temp = tz->forced_passive;
|
|
+ hyst_temp = trip_temp = tz->forced_passive;
|
|
trip_type = THERMAL_TRIPS_NONE;
|
|
} else {
|
|
tz->ops->get_trip_temp(tz, trip, &trip_temp);
|
|
+ hyst_temp = trip_temp;
|
|
+ if (tz->ops->get_trip_hyst) {
|
|
+ tz->ops->get_trip_hyst(tz, trip, &hyst_temp);
|
|
+ hyst_temp = trip_temp - hyst_temp;
|
|
+ }
|
|
tz->ops->get_trip_type(tz, trip, &trip_type);
|
|
}
|
|
|
|
trend = get_tz_trend(tz, trip);
|
|
|
|
- if (tz->temperature >= trip_temp) {
|
|
- throttle = true;
|
|
- trace_thermal_zone_trip(tz, trip, trip_type);
|
|
- }
|
|
-
|
|
- dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n",
|
|
- trip, trip_type, trip_temp, trend, throttle);
|
|
+ dev_dbg(&tz->device,
|
|
+ "Trip%d[type=%d,temp=%d,hyst=%d]:trend=%d,throttle=%d\n",
|
|
+ trip, trip_type, trip_temp, hyst_temp, trend, throttle);
|
|
|
|
mutex_lock(&tz->lock);
|
|
|
|
@@ -159,6 +160,18 @@ static void thermal_zone_trip_update(str
|
|
continue;
|
|
|
|
old_target = instance->target;
|
|
+ throttle = false;
|
|
+ /*
|
|
+ * Lower the mitigation only if the temperature
|
|
+ * goes below the hysteresis temperature.
|
|
+ */
|
|
+ if (tz->temperature >= trip_temp ||
|
|
+ (tz->temperature >= hyst_temp &&
|
|
+ old_target != THERMAL_NO_TARGET)) {
|
|
+ throttle = true;
|
|
+ trace_thermal_zone_trip(tz, trip, trip_type);
|
|
+ }
|
|
+
|
|
instance->target = get_target_state(instance, trend, throttle);
|
|
dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n",
|
|
old_target, (int)instance->target);
|