openwrt/package/network/services/hostapd/files/hostapd.sh
Leon M. Busch-George 3c10c42ddd
hostapd: add quotes in assignments
It's generally advised to use quotes for variable assignments in bash.

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
2023-02-19 19:43:54 +01:00

1617 lines
50 KiB
Bash

. /lib/functions/network.sh
. /lib/functions.sh
wpa_supplicant_add_rate() {
local var="$1"
local val="$(($2 / 1000))"
local sub="$((($2 / 100) % 10))"
append $var "$val" ","
[ $sub -gt 0 ] && append $var "."
}
hostapd_add_rate() {
local var="$1"
local val="$(($2 / 100))"
append $var "$val" " "
}
hostapd_append_wep_key() {
local var="$1"
wep_keyidx=0
set_default key 1
case "$key" in
[1234])
for idx in 1 2 3 4; do
local zidx
zidx="$(($idx - 1))"
json_get_var ckey "key${idx}"
[ -n "$ckey" ] && \
append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
done
wep_keyidx="$((key - 1))"
;;
*)
append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
;;
esac
}
hostapd_append_wpa_key_mgmt() {
local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')"
case "$auth_type" in
psk|eap)
append wpa_key_mgmt "WPA-$auth_type_l"
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}"
[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
;;
eap192)
append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP-SHA384"
;;
eap-eap192)
append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
append wpa_key_mgmt "WPA-EAP"
[ "${ieee80211r:-0}" -gt 0 ] && {
append wpa_key_mgmt "FT-EAP-SHA384"
append wpa_key_mgmt "FT-EAP"
}
[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
;;
sae)
append wpa_key_mgmt "SAE"
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
;;
psk-sae)
append wpa_key_mgmt "WPA-PSK"
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256"
append wpa_key_mgmt "SAE"
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
;;
owe)
append wpa_key_mgmt "OWE"
;;
esac
[ "$fils" -gt 0 ] && {
case "$auth_type" in
eap*)
append wpa_key_mgmt FILS-SHA256
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt FT-FILS-SHA256
;;
esac
}
[ "$auth_osen" = "1" ] && append wpa_key_mgmt "OSEN"
}
hostapd_add_log_config() {
config_add_boolean \
log_80211 \
log_8021x \
log_radius \
log_wpa \
log_driver \
log_iapp \
log_mlme
config_add_int log_level
}
hostapd_common_add_device_config() {
config_add_array basic_rate
config_add_array supported_rates
config_add_string beacon_rate
config_add_string country country3
config_add_boolean country_ie doth
config_add_boolean spectrum_mgmt_required
config_add_int local_pwr_constraint
config_add_string require_mode
config_add_boolean legacy_rates
config_add_int cell_density
config_add_int rts_threshold
config_add_int rssi_reject_assoc_rssi
config_add_int rssi_ignore_probe_request
config_add_int maxassoc
config_add_string acs_chan_bias
config_add_array hostapd_options
config_add_int airtime_mode
hostapd_add_log_config
}
hostapd_prepare_device_config() {
local config="$1"
local driver="$2"
local base_cfg=
json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \
acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc
hostapd_set_log_options base_cfg
set_default country_ie 1
set_default spectrum_mgmt_required 0
set_default doth 1
set_default legacy_rates 0
set_default airtime_mode 0
set_default cell_density 0
[ -n "$country" ] && {
append base_cfg "country_code=$country" "$N"
[ -n "$country3" ] && append base_cfg "country3=$country3" "$N"
[ "$country_ie" -gt 0 ] && {
append base_cfg "ieee80211d=1" "$N"
[ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N"
[ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N"
}
[ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
}
[ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N"
local brlist= br
json_get_values basic_rate_list basic_rate
local rlist= r
json_get_values rate_list supported_rates
[ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
if [ "$hwmode" = "g" ] || [ "$hwmode" = "a" ]; then
[ -n "$require_mode" ] && legacy_rates=0
case "$require_mode" in
n) append base_cfg "require_ht=1" "$N";;
ac) append base_cfg "require_vht=1" "$N";;
esac
fi
case "$hwmode" in
b)
if [ "$cell_density" -eq 1 ]; then
set_default rate_list "5500 11000"
set_default basic_rate_list "5500 11000"
elif [ "$cell_density" -ge 2 ]; then
set_default rate_list "11000"
set_default basic_rate_list "11000"
fi
;;
g)
if [ "$cell_density" -eq 0 ] || [ "$cell_density" -eq 1 ]; then
if [ "$legacy_rates" -eq 0 ]; then
set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
set_default basic_rate_list "6000 12000 24000"
elif [ "$cell_density" -eq 1 ]; then
set_default rate_list "5500 6000 9000 11000 12000 18000 24000 36000 48000 54000"
set_default basic_rate_list "5500 11000"
fi
elif [ "$cell_density" -ge 3 ] && [ "$legacy_rates" -ne 0 ] || [ "$cell_density" -eq 2 ]; then
if [ "$legacy_rates" -eq 0 ]; then
set_default rate_list "12000 18000 24000 36000 48000 54000"
set_default basic_rate_list "12000 24000"
else
set_default rate_list "11000 12000 18000 24000 36000 48000 54000"
set_default basic_rate_list "11000"
fi
elif [ "$cell_density" -ge 3 ]; then
set_default rate_list "24000 36000 48000 54000"
set_default basic_rate_list "24000"
fi
;;
a)
if [ "$cell_density" -eq 1 ]; then
set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
set_default basic_rate_list "6000 12000 24000"
elif [ "$cell_density" -eq 2 ]; then
set_default rate_list "12000 18000 24000 36000 48000 54000"
set_default basic_rate_list "12000 24000"
elif [ "$cell_density" -ge 3 ]; then
set_default rate_list "24000 36000 48000 54000"
set_default basic_rate_list "24000"
fi
;;
esac
for r in $rate_list; do
hostapd_add_rate rlist "$r"
done
for br in $basic_rate_list; do
hostapd_add_rate brlist "$br"
done
[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
append base_cfg "beacon_int=$beacon_int" "$N"
[ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
[ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
json_get_values opts hostapd_options
for val in $opts; do
append base_cfg "$val" "$N"
done
cat > "$config" <<EOF
driver=$driver
$base_cfg
EOF
}
hostapd_common_add_bss_config() {
config_add_string 'bssid:macaddr' 'ssid:string'
config_add_boolean wds wmm uapsd hidden utf8_ssid ppsk
config_add_int maxassoc max_inactivity
config_add_boolean disassoc_low_ack isolate short_preamble skip_inactivity_poll
config_add_int \
wep_rekey eap_reauth_period \
wpa_group_rekey wpa_pair_rekey wpa_master_rekey
config_add_boolean wpa_strict_rekey
config_add_boolean wpa_disable_eapol_key_retries
config_add_boolean tdls_prohibit
config_add_boolean rsn_preauth auth_cache
config_add_int ieee80211w
config_add_int eapol_version
config_add_string 'auth_server:host' 'server:host'
config_add_string auth_secret key
config_add_int 'auth_port:port' 'port:port'
config_add_string acct_server
config_add_string acct_secret
config_add_int acct_port
config_add_int acct_interval
config_add_int bss_load_update_period chan_util_avg_period
config_add_string dae_client
config_add_string dae_secret
config_add_int dae_port
config_add_string nasid
config_add_string ownip
config_add_string radius_client_addr
config_add_string iapp_interface
config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
config_add_boolean ca_cert_usesystem ca_cert2_usesystem
config_add_string subject_match subject_match2
config_add_array altsubject_match altsubject_match2
config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
config_add_string ieee80211w_mgmt_cipher
config_add_int dynamic_vlan vlan_naming vlan_no_bridge
config_add_string vlan_tagged_interface vlan_bridge
config_add_string vlan_file
config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
config_add_string wpa_psk_file
config_add_int multi_ap
config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
config_add_int wps_ap_setup_locked wps_independent
config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
config_add_boolean wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition mbo
config_add_int time_advertisement
config_add_string time_zone
config_add_string vendor_elements
config_add_boolean ieee80211k rrm_neighbor_report rrm_beacon_report
config_add_boolean ftm_responder stationary_ap
config_add_string lci civic
config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
config_add_int r0_key_lifetime reassociation_deadline
config_add_string mobility_domain r1_key_holder
config_add_array r0kh r1kh
config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
config_add_string macfilter 'macfile:file'
config_add_array 'maclist:list(macaddr)'
config_add_array bssid_blacklist
config_add_array bssid_whitelist
config_add_int mcast_rate
config_add_array basic_rate
config_add_array supported_rates
config_add_boolean sae_require_mfp
config_add_int sae_pwe
config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
config_add_string owe_transition_ifname
config_add_boolean iw_enabled iw_internet iw_asra iw_esr iw_uesa
config_add_int iw_access_network_type iw_venue_group iw_venue_type
config_add_int iw_ipaddr_type_availability iw_gas_address3
config_add_string iw_hessid iw_network_auth_type iw_qos_map_set
config_add_array iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm
config_add_array iw_anqp_elem iw_venue_name iw_venue_url
config_add_boolean hs20 disable_dgaf osen
config_add_int anqp_domain_id
config_add_int hs20_deauth_req_timeout
config_add_array hs20_oper_friendly_name
config_add_array osu_provider
config_add_array operator_icon
config_add_array hs20_conn_capab
config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
config_add_string hs20_t_c_server_url
config_add_array airtime_sta_weight
config_add_int airtime_bss_weight airtime_bss_limit
config_add_boolean multicast_to_unicast multicast_to_unicast_all proxy_arp per_sta_vif
config_add_array hostapd_bss_options
config_add_boolean default_disabled
config_add_boolean request_cui
config_add_array radius_auth_req_attr
config_add_array radius_acct_req_attr
config_add_int eap_server
config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
config_add_boolean fils
config_add_string fils_dhcp
config_add_int ocv
}
hostapd_set_vlan_file() {
local ifname="$1"
local vlan="$2"
json_get_vars name vid
echo "${vid} ${ifname}-${name}" >> /var/run/hostapd-${ifname}.vlan
wireless_add_vlan "${vlan}" "${ifname}-${name}"
}
hostapd_set_vlan() {
local ifname="$1"
rm -f /var/run/hostapd-${ifname}.vlan
for_each_vlan hostapd_set_vlan_file ${ifname}
}
hostapd_set_psk_file() {
local ifname="$1"
local vlan="$2"
local vlan_id=""
json_get_vars mac vid key
set_default mac "00:00:00:00:00:00"
[ -n "$vid" ] && vlan_id="vlanid=$vid "
echo "${vlan_id} ${mac} ${key}" >> /var/run/hostapd-${ifname}.psk
}
hostapd_set_psk() {
local ifname="$1"
rm -f /var/run/hostapd-${ifname}.psk
for_each_station hostapd_set_psk_file ${ifname}
}
append_iw_roaming_consortium() {
[ -n "$1" ] && append bss_conf "roaming_consortium=$1" "$N"
}
append_iw_domain_name() {
if [ -z "$iw_domain_name_conf" ]; then
iw_domain_name_conf="$1"
else
iw_domain_name_conf="$iw_domain_name_conf,$1"
fi
}
append_iw_anqp_3gpp_cell_net() {
if [ -z "$iw_anqp_3gpp_cell_net_conf" ]; then
iw_anqp_3gpp_cell_net_conf="$1"
else
iw_anqp_3gpp_cell_net_conf="$iw_anqp_3gpp_cell_net_conf:$1"
fi
}
append_iw_anqp_elem() {
[ -n "$1" ] && append bss_conf "anqp_elem=$1" "$N"
}
append_iw_nai_realm() {
[ -n "$1" ] && append bss_conf "nai_realm=$1" "$N"
}
append_iw_venue_name() {
append bss_conf "venue_name=$1" "$N"
}
append_iw_venue_url() {
append bss_conf "venue_url=$1" "$N"
}
append_hs20_oper_friendly_name() {
append bss_conf "hs20_oper_friendly_name=$1" "$N"
}
append_osu_provider_friendly_name() {
append bss_conf "osu_friendly_name=$1" "$N"
}
append_osu_provider_service_desc() {
append bss_conf "osu_service_desc=$1" "$N"
}
append_hs20_icon() {
local width height lang type path
config_get width "$1" width
config_get height "$1" height
config_get lang "$1" lang
config_get type "$1" type
config_get path "$1" path
append bss_conf "hs20_icon=$width:$height:$lang:$type:$1:$path" "$N"
}
append_hs20_icons() {
config_load wireless
config_foreach append_hs20_icon hs20-icon
}
append_operator_icon() {
append bss_conf "operator_icon=$1" "$N"
}
append_osu_icon() {
append bss_conf "osu_icon=$1" "$N"
}
append_osu_provider() {
local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list
config_load wireless
config_get cfgtype "$1" TYPE
[ "$cfgtype" != "osu-provider" ] && return
append bss_conf "# provider $1" "$N"
config_get osu_server_uri "$1" osu_server_uri
config_get osu_nai "$1" osu_nai
config_get osu_nai2 "$1" osu_nai2
config_get osu_method_list "$1" osu_method
append bss_conf "osu_server_uri=$osu_server_uri" "$N"
append bss_conf "osu_nai=$osu_nai" "$N"
append bss_conf "osu_nai2=$osu_nai2" "$N"
append bss_conf "osu_method_list=$osu_method_list" "$N"
config_list_foreach "$1" osu_service_desc append_osu_provider_service_desc
config_list_foreach "$1" osu_friendly_name append_osu_friendly_name
config_list_foreach "$1" osu_icon append_osu_icon
append bss_conf "$N"
}
append_hs20_conn_capab() {
[ -n "$1" ] && append bss_conf "hs20_conn_capab=$1" "$N"
}
append_radius_acct_req_attr() {
[ -n "$1" ] && append bss_conf "radius_acct_req_attr=$1" "$N"
}
append_radius_auth_req_attr() {
[ -n "$1" ] && append bss_conf "radius_auth_req_attr=$1" "$N"
}
append_airtime_sta_weight() {
[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
}
hostapd_set_bss_options() {
local var="$1"
local phy="$2"
local vif="$3"
wireless_vif_parse_encryption
local bss_conf bss_md5sum ft_key
local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
json_get_vars \
wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \
wpa_disable_eapol_key_retries tdls_prohibit \
maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
acct_server acct_secret acct_port acct_interval \
bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
multicast_to_unicast_all proxy_arp per_sta_vif \
eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
vendor_elements fils ocv
set_default fils 0
set_default isolate 0
set_default maxassoc 0
set_default max_inactivity 0
set_default short_preamble 1
set_default disassoc_low_ack 1
set_default skip_inactivity_poll 0
set_default hidden 0
set_default wmm 1
set_default uapsd 1
set_default wpa_disable_eapol_key_retries 0
set_default tdls_prohibit 0
set_default eapol_version $((wpa & 1))
set_default acct_port 1813
set_default bss_load_update_period 60
set_default chan_util_avg_period 600
set_default utf8_ssid 1
set_default multi_ap 0
set_default ppsk 0
set_default airtime_bss_weight 0
set_default airtime_bss_limit 0
set_default eap_server 0
/usr/sbin/hostapd -vfils || fils=0
append bss_conf "ctrl_interface=/var/run/hostapd"
if [ "$isolate" -gt 0 ]; then
append bss_conf "ap_isolate=$isolate" "$N"
fi
if [ "$maxassoc" -gt 0 ]; then
append bss_conf "max_num_sta=$maxassoc" "$N"
fi
if [ "$max_inactivity" -gt 0 ]; then
append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
fi
[ "$airtime_bss_weight" -gt 0 ] && append bss_conf "airtime_bss_weight=$airtime_bss_weight" "$N"
[ "$airtime_bss_limit" -gt 0 ] && append bss_conf "airtime_bss_limit=$airtime_bss_limit" "$N"
json_for_each_item append_airtime_sta_weight airtime_sta_weight
append bss_conf "bss_load_update_period=$bss_load_update_period" "$N"
append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N"
append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
append bss_conf "skip_inactivity_poll=$skip_inactivity_poll" "$N"
append bss_conf "preamble=$short_preamble" "$N"
append bss_conf "wmm_enabled=$wmm" "$N"
append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
append bss_conf "utf8_ssid=$utf8_ssid" "$N"
append bss_conf "multi_ap=$multi_ap" "$N"
[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
[ "$wpa" -gt 0 ] && {
[ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
[ -n "$wpa_pair_rekey" ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
[ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
}
set_default nasid "${macaddr//\:}"
append bss_conf "nas_identifier=$nasid" "$N"
[ -n "$acct_server" ] && {
append bss_conf "acct_server_addr=$acct_server" "$N"
append bss_conf "acct_server_port=$acct_port" "$N"
[ -n "$acct_secret" ] && \
append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
[ -n "$acct_interval" ] && \
append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
}
[ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N"
case "$auth_type" in
sae|owe|eap192|eap-eap192)
set_default ieee80211w 2
set_default sae_require_mfp 1
set_default sae_pwe 2
;;
psk-sae)
set_default ieee80211w 1
set_default sae_require_mfp 1
set_default sae_pwe 2
;;
esac
[ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
[ -n "$sae_pwe" ] && append bss_conf "sae_pwe=$sae_pwe" "$N"
local vlan_possible=""
case "$auth_type" in
none|owe)
json_get_vars owe_transition_bssid owe_transition_ssid owe_transition_ifname
[ -n "$owe_transition_ssid" ] && append bss_conf "owe_transition_ssid=\"$owe_transition_ssid\"" "$N"
[ -n "$owe_transition_bssid" ] && append bss_conf "owe_transition_bssid=$owe_transition_bssid" "$N"
[ -n "$owe_transition_ifname" ] && append bss_conf "owe_transition_ifname=$owe_transition_ifname" "$N"
wps_possible=1
# Here we make the assumption that if we're in open mode
# with WPS enabled, we got to be in unconfigured state.
wps_not_configured=1
;;
psk|sae|psk-sae)
json_get_vars key wpa_psk_file
if [ "$auth_type" = "psk" ] && [ "$ppsk" -ne 0 ] ; then
json_get_vars auth_server auth_secret auth_port
set_default auth_port 1812
append bss_conf "auth_server_addr=$auth_server" "$N"
append bss_conf "auth_server_port=$auth_port" "$N"
append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
append bss_conf "macaddr_acl=2" "$N"
append bss_conf "wpa_psk_radius=2" "$N"
elif [ ${#key} -eq 64 ]; then
append bss_conf "wpa_psk=$key" "$N"
elif [ ${#key} -ge 8 ] && [ ${#key} -le 63 ]; then
append bss_conf "wpa_passphrase=$key" "$N"
elif [ -n "$key" ] || [ -z "$wpa_psk_file" ]; then
wireless_setup_vif_failed INVALID_WPA_PSK
return 1
fi
[ -z "$wpa_psk_file" ] && set_default wpa_psk_file /var/run/hostapd-$ifname.psk
[ -n "$wpa_psk_file" ] && {
[ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
}
[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
set_default dynamic_vlan 0
vlan_possible=1
wps_possible=1
;;
eap|eap192|eap-eap192)
json_get_vars \
auth_server auth_secret auth_port \
dae_client dae_secret dae_port \
dynamic_ownip ownip radius_client_addr \
eap_reauth_period request_cui \
erp_domain mobility_domain \
fils_realm fils_dhcp
# radius can provide VLAN ID for clients
vlan_possible=1
set_default dynamic_ownip 1
# legacy compatibility
[ -n "$auth_server" ] || json_get_var auth_server server
[ -n "$auth_port" ] || json_get_var auth_port port
[ -n "$auth_secret" ] || json_get_var auth_secret key
[ "$fils" -gt 0 ] && {
set_default erp_domain "$mobility_domain"
set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
set_default fils_realm "$erp_domain"
append bss_conf "erp_send_reauth_start=1" "$N"
append bss_conf "erp_domain=$erp_domain" "$N"
append bss_conf "fils_realm=$fils_realm" "$N"
append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
[ "$fils_dhcp" = "*" ] && {
json_get_values network network
fils_dhcp=
for net in $network; do
fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
[ -n "$fils_dhcp" ] && break
done
[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
}
[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
}
set_default auth_port 1812
set_default dae_port 3799
set_default request_cui 0
[ "$eap_server" -eq 0 ] && {
append bss_conf "auth_server_addr=$auth_server" "$N"
append bss_conf "auth_server_port=$auth_port" "$N"
append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
}
[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
[ -n "$dae_client" -a -n "$dae_secret" ] && {
append bss_conf "radius_das_port=$dae_port" "$N"
append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
}
json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
if [ -n "$ownip" ]; then
append bss_conf "own_ip_addr=$ownip" "$N"
elif [ "$dynamic_ownip" -gt 0 ]; then
append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
fi
[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
append bss_conf "eapol_key_index_workaround=1" "$N"
append bss_conf "ieee8021x=1" "$N"
[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
;;
wep)
local wep_keyidx=0
json_get_vars key
hostapd_append_wep_key bss_conf
append bss_conf "wep_default_key=$wep_keyidx" "$N"
[ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
;;
esac
case "$auth_type" in
none|owe|psk|sae|psk-sae|wep)
json_get_vars \
auth_server auth_port auth_secret \
ownip radius_client_addr
[ -n "$auth_server" ] && {
set_default auth_port 1812
append bss_conf "auth_server_addr=$auth_server" "$N"
append bss_conf "auth_server_port=$auth_port" "$N"
[ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
[ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
append bss_conf "macaddr_acl=2" "$N"
}
;;
esac
local auth_algs="$((($auth_mode_shared << 1) | $auth_mode_open))"
append bss_conf "auth_algs=${auth_algs:-1}" "$N"
append bss_conf "wpa=$wpa" "$N"
[ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
set_default wps_pushbutton 0
set_default wps_label 0
set_default wps_pbc_in_m1 0
config_methods=
[ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
[ "$wps_label" -gt 0 ] && append config_methods label
# WPS not possible on Multi-AP backhaul-only SSID
[ "$multi_ap" = 1 ] && wps_possible=
[ -n "$wps_possible" -a -n "$config_methods" ] && {
set_default ext_registrar 0
set_default wps_device_type "6-0050F204-1"
set_default wps_device_name "OpenWrt AP"
set_default wps_manufacturer "www.openwrt.org"
set_default wps_independent 1
wps_state=2
[ -n "$wps_not_configured" ] && wps_state=1
[ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
append bss_conf "eap_server=1" "$N"
[ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
append bss_conf "wps_state=$wps_state" "$N"
append bss_conf "device_type=$wps_device_type" "$N"
append bss_conf "device_name=$wps_device_name" "$N"
append bss_conf "manufacturer=$wps_manufacturer" "$N"
append bss_conf "config_methods=$config_methods" "$N"
append bss_conf "wps_independent=$wps_independent" "$N"
[ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
[ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
[ "$multi_ap" -gt 0 ] && [ -n "$multi_ap_backhaul_ssid" ] && {
append bss_conf "multi_ap_backhaul_ssid=\"$multi_ap_backhaul_ssid\"" "$N"
if [ -z "$multi_ap_backhaul_key" ]; then
:
elif [ ${#multi_ap_backhaul_key} -lt 8 ]; then
wireless_setup_vif_failed INVALID_WPA_PSK
return 1
elif [ ${#multi_ap_backhaul_key} -eq 64 ]; then
append bss_conf "multi_ap_backhaul_wpa_psk=$multi_ap_backhaul_key" "$N"
else
append bss_conf "multi_ap_backhaul_wpa_passphrase=$multi_ap_backhaul_key" "$N"
fi
}
}
append bss_conf "ssid=$ssid" "$N"
[ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge${N}wds_bridge=" "$N"
[ -n "$network_ifname" ] && append bss_conf "snoop_iface=$network_ifname" "$N"
[ -n "$iapp_interface" ] && {
local ifname
network_get_device ifname "$iapp_interface" || ifname="$iapp_interface"
append bss_conf "iapp_interface=$ifname" "$N"
}
json_get_vars time_advertisement time_zone wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition mbo
set_default bss_transition 0
set_default wnm_sleep_mode 0
set_default wnm_sleep_mode_no_keys 0
set_default mbo 0
[ -n "$time_advertisement" ] && append bss_conf "time_advertisement=$time_advertisement" "$N"
[ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
if [ "$wnm_sleep_mode" -eq "1" ]; then
append bss_conf "wnm_sleep_mode=1" "$N"
[ "$wnm_sleep_mode_no_keys" -eq "1" ] && append bss_conf "wnm_sleep_mode_no_keys=1" "$N"
fi
[ "$bss_transition" -eq "1" ] && append bss_conf "bss_transition=1" "$N"
[ "$mbo" -eq 1 ] && append bss_conf "mbo=1" "$N"
json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report
set_default ieee80211k 0
if [ "$ieee80211k" -eq "1" ]; then
set_default rrm_neighbor_report 1
set_default rrm_beacon_report 1
else
set_default rrm_neighbor_report 0
set_default rrm_beacon_report 0
fi
[ "$rrm_neighbor_report" -eq "1" ] && append bss_conf "rrm_neighbor_report=1" "$N"
[ "$rrm_beacon_report" -eq "1" ] && append bss_conf "rrm_beacon_report=1" "$N"
json_get_vars ftm_responder stationary_ap lci civic
set_default ftm_responder 0
if [ "$ftm_responder" -eq "1" ]; then
set_default stationary_ap 0
iw phy "$phy" info | grep -q "ENABLE_FTM_RESPONDER" && {
append bss_conf "ftm_responder=1" "$N"
[ "$stationary_ap" -eq "1" ] && append bss_conf "stationary_ap=1" "$N"
[ -n "$lci" ] && append bss_conf "lci=$lci" "$N"
[ -n "$civic" ] && append bss_conf "civic=$civic" "$N"
}
fi
if [ "$wpa" -ge "1" ]; then
json_get_vars ieee80211r
set_default ieee80211r 0
if [ "$ieee80211r" -gt "0" ]; then
json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
set_default ft_over_ds 0
set_default reassociation_deadline 1000
case "$auth_type" in
psk|sae|psk-sae)
set_default ft_psk_generate_local 1
;;
*)
set_default ft_psk_generate_local 0
;;
esac
[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
append bss_conf "mobility_domain=$mobility_domain" "$N"
append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
append bss_conf "ft_over_ds=$ft_over_ds" "$N"
append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
if [ "$ft_psk_generate_local" -eq "0" ]; then
json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
json_get_values r0kh r0kh
json_get_values r1kh r1kh
set_default r0_key_lifetime 10000
set_default pmk_r1_push 0
[ -n "$r0kh" -a -n "$r1kh" ] || {
ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'`
set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key"
set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key"
}
[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
for kh in $r0kh; do
append bss_conf "r0kh=${kh//,/ }" "$N"
done
for kh in $r1kh; do
append bss_conf "r1kh=${kh//,/ }" "$N"
done
fi
fi
if [ "$fils" -gt 0 ]; then
json_get_vars fils_realm
set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
fi
append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
hostapd_append_wpa_key_mgmt
[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
fi
if [ "$wpa" -ge "2" ]; then
if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
set_default auth_cache 1
append bss_conf "rsn_preauth=1" "$N"
append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
else
case "$auth_type" in
sae|psk-sae|owe)
set_default auth_cache 1
;;
*)
set_default auth_cache 0
;;
esac
fi
append bss_conf "okc=$auth_cache" "$N"
[ "$auth_cache" = 0 -a "$fils" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
# RSN -> allow management frame protection
case "$ieee80211w" in
[012])
json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
append bss_conf "ieee80211w=$ieee80211w" "$N"
[ "$ieee80211w" -gt "0" ] && {
if [ "$auth_type" = "eap192" ]; then
append bss_conf "group_mgmt_cipher=BIP-GMAC-256" "$N"
else
append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
fi
[ -n "$ieee80211w_max_timeout" ] && \
append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
[ -n "$ieee80211w_retry_timeout" ] && \
append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
}
;;
esac
fi
_macfile="/var/run/hostapd-$ifname.maclist"
case "$macfilter" in
allow)
append bss_conf "macaddr_acl=1" "$N"
append bss_conf "accept_mac_file=$_macfile" "$N"
# accept_mac_file can be used to set MAC to VLAN ID mapping
vlan_possible=1
;;
deny)
append bss_conf "macaddr_acl=0" "$N"
append bss_conf "deny_mac_file=$_macfile" "$N"
;;
*)
_macfile=""
;;
esac
[ -n "$_macfile" ] && {
json_get_vars macfile
json_get_values maclist maclist
rm -f "$_macfile"
(
for mac in $maclist; do
echo "$mac"
done
[ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
) > "$_macfile"
}
[ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file vlan_no_bridge
set_default vlan_naming 1
[ -z "$vlan_file" ] && set_default vlan_file /var/run/hostapd-$ifname.vlan
append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
append bss_conf "vlan_naming=$vlan_naming" "$N"
if [ -n "$vlan_bridge" ]; then
append bss_conf "vlan_bridge=$vlan_bridge" "$N"
else
set_default vlan_no_bridge 1
fi
append bss_conf "vlan_no_bridge=$vlan_no_bridge" "$N"
[ -n "$vlan_tagged_interface" ] && \
append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
[ -n "$vlan_file" ] && {
[ -e "$vlan_file" ] || touch "$vlan_file"
append bss_conf "vlan_file=$vlan_file" "$N"
}
}
json_get_vars iw_enabled iw_internet iw_asra iw_esr iw_uesa iw_access_network_type
json_get_vars iw_hessid iw_venue_group iw_venue_type iw_network_auth_type
json_get_vars iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm
json_get_vars iw_anqp_elem iw_qos_map_set iw_ipaddr_type_availability iw_gas_address3
json_get_vars iw_venue_name iw_venue_url
set_default iw_enabled 0
if [ "$iw_enabled" = "1" ]; then
append bss_conf "interworking=1" "$N"
set_default iw_internet 1
set_default iw_asra 0
set_default iw_esr 0
set_default iw_uesa 0
append bss_conf "internet=$iw_internet" "$N"
append bss_conf "asra=$iw_asra" "$N"
append bss_conf "esr=$iw_esr" "$N"
append bss_conf "uesa=$iw_uesa" "$N"
[ -n "$iw_access_network_type" ] && \
append bss_conf "access_network_type=$iw_access_network_type" "$N"
[ -n "$iw_hessid" ] && append bss_conf "hessid=$iw_hessid" "$N"
[ -n "$iw_venue_group" ] && \
append bss_conf "venue_group=$iw_venue_group" "$N"
[ -n "$iw_venue_type" ] && append bss_conf "venue_type=$iw_venue_type" "$N"
[ -n "$iw_network_auth_type" ] && \
append bss_conf "network_auth_type=$iw_network_auth_type" "$N"
[ -n "$iw_gas_address3" ] && append bss_conf "gas_address3=$iw_gas_address3" "$N"
json_for_each_item append_iw_roaming_consortium iw_roaming_consortium
json_for_each_item append_iw_anqp_elem iw_anqp_elem
json_for_each_item append_iw_nai_realm iw_nai_realm
json_for_each_item append_iw_venue_name iw_venue_name
json_for_each_item append_iw_venue_url iw_venue_url
iw_domain_name_conf=
json_for_each_item append_iw_domain_name iw_domain_name
[ -n "$iw_domain_name_conf" ] && \
append bss_conf "domain_name=$iw_domain_name_conf" "$N"
iw_anqp_3gpp_cell_net_conf=
json_for_each_item append_iw_anqp_3gpp_cell_net iw_anqp_3gpp_cell_net
[ -n "$iw_anqp_3gpp_cell_net_conf" ] && \
append bss_conf "anqp_3gpp_cell_net=$iw_anqp_3gpp_cell_net_conf" "$N"
fi
set_default iw_qos_map_set 0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
case "$iw_qos_map_set" in
*,*);;
*) iw_qos_map_set="";;
esac
[ -n "$iw_qos_map_set" ] && append bss_conf "qos_map_set=$iw_qos_map_set" "$N"
local hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \
hs20_t_c_server_url
json_get_vars hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \
hs20_t_c_server_url
set_default hs20 0
set_default disable_dgaf $hs20
set_default osen 0
set_default anqp_domain_id 0
set_default hs20_deauth_req_timeout 60
if [ "$hs20" = "1" ]; then
append bss_conf "hs20=1" "$N"
append_hs20_icons
append bss_conf "disable_dgaf=$disable_dgaf" "$N"
append bss_conf "osen=$osen" "$N"
append bss_conf "anqp_domain_id=$anqp_domain_id" "$N"
append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
[ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N"
[ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N"
[ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
[ -n "$hs20_t_c_filename" ] && append bss_conf "hs20_t_c_filename=$hs20_t_c_filename" "$N"
[ -n "$hs20_t_c_timestamp" ] && append bss_conf "hs20_t_c_timestamp=$hs20_t_c_timestamp" "$N"
[ -n "$hs20_t_c_server_url" ] && append bss_conf "hs20_t_c_server_url=$hs20_t_c_server_url" "$N"
json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
json_for_each_item append_hs20_conn_capab hs20_conn_capab
json_for_each_item append_osu_provider osu_provider
json_for_each_item append_operator_icon operator_icon
fi
if [ "$eap_server" = "1" ]; then
append bss_conf "eap_server=1" "$N"
append bss_conf "eap_server_erp=1" "$N"
[ -n "$eap_user_file" ] && append bss_conf "eap_user_file=$eap_user_file" "$N"
[ -n "$ca_cert" ] && append bss_conf "ca_cert=$ca_cert" "$N"
[ -n "$server_cert" ] && append bss_conf "server_cert=$server_cert" "$N"
[ -n "$private_key" ] && append bss_conf "private_key=$private_key" "$N"
[ -n "$private_key_passwd" ] && append bss_conf "private_key_passwd=$private_key_passwd" "$N"
[ -n "$server_id" ] && append bss_conf "server_id=$server_id" "$N"
fi
set_default multicast_to_unicast_all 0
if [ "$multicast_to_unicast_all" -gt 0 ]; then
append bss_conf "multicast_to_unicast=$multicast_to_unicast_all" "$N"
fi
set_default proxy_arp 0
if [ "$proxy_arp" -gt 0 ]; then
append bss_conf "proxy_arp=$proxy_arp" "$N"
fi
set_default per_sta_vif 0
if [ "$per_sta_vif" -gt 0 ]; then
append bss_conf "per_sta_vif=$per_sta_vif" "$N"
fi
json_get_values opts hostapd_bss_options
for val in $opts; do
append bss_conf "$val" "$N"
done
bss_md5sum="$(echo $bss_conf | md5sum | cut -d" " -f1)"
append bss_conf "config_id=$bss_md5sum" "$N"
append "$var" "$bss_conf" "$N"
return 0
}
hostapd_set_log_options() {
local var="$1"
local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
set_default log_level 2
set_default log_80211 1
set_default log_8021x 1
set_default log_radius 1
set_default log_wpa 1
set_default log_driver 1
set_default log_iapp 1
set_default log_mlme 1
local log_mask="$(( \
($log_80211 << 0) | \
($log_8021x << 1) | \
($log_radius << 2) | \
($log_wpa << 3) | \
($log_driver << 4) | \
($log_iapp << 5) | \
($log_mlme << 6) \
))"
append "$var" "logger_syslog=$log_mask" "$N"
append "$var" "logger_syslog_level=$log_level" "$N"
append "$var" "logger_stdout=$log_mask" "$N"
append "$var" "logger_stdout_level=$log_level" "$N"
return 0
}
_wpa_supplicant_common() {
local ifname="$1"
_rpath="/var/run/wpa_supplicant"
_config="${_rpath}-$ifname.conf"
}
wpa_supplicant_teardown_interface() {
_wpa_supplicant_common "$1"
rm -rf "$_rpath/$1" "$_config"
}
wpa_supplicant_prepare_interface() {
local ifname="$1"
_w_driver="$2"
_wpa_supplicant_common "$1"
json_get_vars mode wds multi_ap
[ -n "$network_bridge" ] && {
fail=
case "$mode" in
adhoc)
fail=1
;;
sta)
[ "$wds" = 1 -o "$multi_ap" = 1 ] || fail=1
;;
esac
[ -n "$fail" ] && {
wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
return 1
}
}
local ap_scan=
_w_mode="$mode"
[ "$mode" = adhoc ] && {
ap_scan="ap_scan=2"
}
local country_str=
[ -n "$country" ] && {
country_str="country=$country"
}
multiap_flag_file="${_config}.is_multiap"
if [ "$multi_ap" = "1" ]; then
touch "$multiap_flag_file"
else
[ -e "$multiap_flag_file" ] && rm "$multiap_flag_file"
fi
wpa_supplicant_teardown_interface "$ifname"
cat > "$_config" <<EOF
${scan_list:+freq_list=$scan_list}
$ap_scan
$country_str
EOF
return 0
}
wpa_supplicant_set_fixed_freq() {
local freq="$1"
local htmode="$2"
append network_data "fixed_freq=1" "$N$T"
append network_data "frequency=$freq" "$N$T"
case "$htmode" in
NOHT) append network_data "disable_ht=1" "$N$T";;
HE20|HT20|VHT20) append network_data "disable_ht40=1" "$N$T";;
HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160) append network_data "ht40=1" "$N$T";;
esac
case "$htmode" in
VHT*) append network_data "vht=1" "$N$T";;
esac
case "$htmode" in
HE80|VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
HE160|VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
HE20|HE40|VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
*) append network_data "disable_vht=1" "$N$T";;
esac
}
wpa_supplicant_add_network() {
local ifname="$1"
local freq="$2"
local htmode="$3"
local noscan="$4"
_wpa_supplicant_common "$1"
wireless_vif_parse_encryption
json_get_vars \
ssid bssid key \
basic_rate mcast_rate \
ieee80211w ieee80211r fils ocv \
multi_ap \
default_disabled
case "$auth_type" in
sae|owe|eap192|eap-eap192)
set_default ieee80211w 2
;;
psk-sae)
set_default ieee80211w 1
;;
esac
set_default ieee80211r 0
set_default multi_ap 0
set_default default_disabled 0
local key_mgmt='NONE'
local network_data=
local T=" "
local scan_ssid="scan_ssid=1"
local freq wpa_key_mgmt
[ "$_w_mode" = "adhoc" ] && {
append network_data "mode=1" "$N$T"
[ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
[ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
scan_ssid="scan_ssid=0"
[ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE"
}
[ "$_w_mode" = "mesh" ] && {
json_get_vars mesh_id mesh_fwding mesh_rssi_threshold encryption
[ -n "$mesh_id" ] && ssid="${mesh_id}"
append network_data "mode=5" "$N$T"
[ -n "$mesh_fwding" ] && append network_data "mesh_fwding=${mesh_fwding}" "$N$T"
[ -n "$mesh_rssi_threshold" ] && append network_data "mesh_rssi_threshold=${mesh_rssi_threshold}" "$N$T"
[ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
[ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
[ "$encryption" = "none" -o -z "$encryption" ] || append wpa_key_mgmt "SAE"
scan_ssid=""
}
[ "$_w_mode" = "sta" ] && {
[ "$multi_ap" = 1 ] && append network_data "multi_ap_backhaul_sta=1" "$N$T"
[ "$default_disabled" = 1 ] && append network_data "disabled=1" "$N$T"
}
[ -n "$ocv" ] && append network_data "ocv=$ocv" "$N$T"
case "$auth_type" in
none) ;;
owe)
hostapd_append_wpa_key_mgmt
key_mgmt="$wpa_key_mgmt"
;;
wep)
local wep_keyidx=0
hostapd_append_wep_key network_data
append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
;;
wps)
key_mgmt='WPS'
;;
psk|sae|psk-sae)
local passphrase
if [ "$_w_mode" != "mesh" ]; then
hostapd_append_wpa_key_mgmt
fi
key_mgmt="$wpa_key_mgmt"
if [ ${#key} -eq 64 ]; then
passphrase="psk=${key}"
else
if [ "$_w_mode" = "mesh" ]; then
passphrase="sae_password=\"${key}\""
else
passphrase="psk=\"${key}\""
fi
fi
append network_data "$passphrase" "$N$T"
;;
eap|eap192|eap-eap192)
hostapd_append_wpa_key_mgmt
key_mgmt="$wpa_key_mgmt"
json_get_vars eap_type identity anonymous_identity ca_cert ca_cert_usesystem
[ "$fils" -gt 0 ] && append network_data "erp=1" "$N$T"
if [ "$ca_cert_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
append network_data "ca_cert=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
else
[ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
fi
[ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
[ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
case "$eap_type" in
tls)
json_get_vars client_cert priv_key priv_key_pwd
append network_data "client_cert=\"$client_cert\"" "$N$T"
append network_data "private_key=\"$priv_key\"" "$N$T"
append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
json_get_vars subject_match
[ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
json_get_values altsubject_match altsubject_match
if [ -n "$altsubject_match" ]; then
local list=
for x in $altsubject_match; do
append list "$x" ";"
done
append network_data "altsubject_match=\"$list\"" "$N$T"
fi
json_get_values domain_match domain_match
if [ -n "$domain_match" ]; then
local list=
for x in $domain_match; do
append list "$x" ";"
done
append network_data "domain_match=\"$list\"" "$N$T"
fi
json_get_values domain_suffix_match domain_suffix_match
if [ -n "$domain_suffix_match" ]; then
local list=
for x in $domain_suffix_match; do
append list "$x" ";"
done
append network_data "domain_suffix_match=\"$list\"" "$N$T"
fi
;;
fast|peap|ttls)
json_get_vars auth password ca_cert2 ca_cert2_usesystem client_cert2 priv_key2 priv_key2_pwd
set_default auth MSCHAPV2
if [ "$auth" = "EAP-TLS" ]; then
if [ "$ca_cert2_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
append network_data "ca_cert2=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
else
[ -n "$ca_cert2" ] && append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
fi
append network_data "client_cert2=\"$client_cert2\"" "$N$T"
append network_data "private_key2=\"$priv_key2\"" "$N$T"
append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
else
append network_data "password=\"$password\"" "$N$T"
fi
json_get_vars subject_match
[ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
json_get_values altsubject_match altsubject_match
if [ -n "$altsubject_match" ]; then
local list=
for x in $altsubject_match; do
append list "$x" ";"
done
append network_data "altsubject_match=\"$list\"" "$N$T"
fi
json_get_values domain_match domain_match
if [ -n "$domain_match" ]; then
local list=
for x in $domain_match; do
append list "$x" ";"
done
append network_data "domain_match=\"$list\"" "$N$T"
fi
json_get_values domain_suffix_match domain_suffix_match
if [ -n "$domain_suffix_match" ]; then
local list=
for x in $domain_suffix_match; do
append list "$x" ";"
done
append network_data "domain_suffix_match=\"$list\"" "$N$T"
fi
phase2proto="auth="
case "$auth" in
"auth"*)
phase2proto=""
;;
"EAP-"*)
auth="$(echo $auth | cut -b 5- )"
[ "$eap_type" = "ttls" ] &&
phase2proto="autheap="
json_get_vars subject_match2
[ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T"
json_get_values altsubject_match2 altsubject_match2
if [ -n "$altsubject_match2" ]; then
local list=
for x in $altsubject_match2; do
append list "$x" ";"
done
append network_data "altsubject_match2=\"$list\"" "$N$T"
fi
json_get_values domain_match2 domain_match2
if [ -n "$domain_match2" ]; then
local list=
for x in $domain_match2; do
append list "$x" ";"
done
append network_data "domain_match2=\"$list\"" "$N$T"
fi
json_get_values domain_suffix_match2 domain_suffix_match2
if [ -n "$domain_suffix_match2" ]; then
local list=
for x in $domain_suffix_match2; do
append list "$x" ";"
done
append network_data "domain_suffix_match2=\"$list\"" "$N$T"
fi
;;
esac
append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
;;
esac
append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
;;
esac
[ "$wpa_cipher" = GCMP ] && {
append network_data "pairwise=GCMP" "$N$T"
append network_data "group=GCMP" "$N$T"
}
[ "$mode" = mesh ] || {
case "$wpa" in
1)
append network_data "proto=WPA" "$N$T"
;;
2)
append network_data "proto=RSN" "$N$T"
;;
esac
case "$ieee80211w" in
[012])
[ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
;;
esac
}
[ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
local bssid_blacklist bssid_whitelist
json_get_values bssid_blacklist bssid_blacklist
json_get_values bssid_whitelist bssid_whitelist
[ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
[ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
[ -n "$basic_rate" ] && {
local br rate_list=
for br in $basic_rate; do
wpa_supplicant_add_rate rate_list "$br"
done
[ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
}
[ -n "$mcast_rate" ] && {
local mc_rate=
wpa_supplicant_add_rate mc_rate "$mcast_rate"
append network_data "mcast_rate=$mc_rate" "$N$T"
}
if [ "$key_mgmt" = "WPS" ]; then
echo "wps_cred_processing=1" >> "$_config"
else
cat >> "$_config" <<EOF
network={
$scan_ssid
ssid="$ssid"
key_mgmt=$key_mgmt
$network_data
}
EOF
fi
return 0
}
wpa_supplicant_run() {
local ifname="$1"
local hostapd_ctrl="$2"
_wpa_supplicant_common "$ifname"
ubus wait_for wpa_supplicant
local supplicant_res="$(ubus call wpa_supplicant config_add "{ \
\"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
\"iface\": \"$ifname\", \"config\": \"$_config\" \
${network_bridge:+, \"bridge\": \"$network_bridge\"} \
${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
}")"
ret="$?"
[ "$ret" != 0 -o -z "$supplicant_res" ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
wireless_add_process "$(jsonfilter -s "$supplicant_res" -l 1 -e @.pid)" "/usr/sbin/wpa_supplicant" 1 1
return $ret
}
hostapd_common_cleanup() {
killall meshd-nl80211
}