openwrt/target/linux/ramips/image
NOGUCHI Hiroshi a1c6a316d2 ramips: add support for Fon FON2601
FON2601 is a wireless router.

Specification:
- SoC: Mediatek MT7620A (580MHz)
- RAM: 128 MiB
- ROM: 16 MiB SPI Flash
- Wireless:
   for 11b/g/n (upto 300 Mbps):  MT7620A built-in WMAC
   for 11a/n/ac (upto 867 Mbps): MT7662E
- Ethernet LAN: 1 port, upto 100 Mbps
- Ethernet WAN: 1 port, upto 1000 Mbps
- USB: 1 port (USB 2.0 host)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 1 (Displayed as "WPS" on enclosure)
- serial port: 57600n8
 pins: Vcc(3.3V), Rx, Tx, GND
(left to right, viewed from outside of board)

Installation (only available via UART):
  1. download sysupgrade binary image by wget command
  2. write sysupgrade binary image to Flash
     command is:
       mtd write sysupgrade.bin firmware
  3. reboot

Important Notice:
  Only one button is displayed as "WPS" on enclosure.
  However, it is configured as "reset" (factory resetting feature).

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
..
lzma-loader ramips: Add support for mt7621 to lzma-loader 2018-06-21 06:54:42 +02:00
Makefile ramips: add support for Fon FON2601 2019-07-26 08:09:16 +02:00
mt76x8.mk ramips: remove ralink_default_fw_size_xxx variables 2019-07-25 14:31:30 +02:00
mt7620.mk ramips: add support for Fon FON2601 2019-07-26 08:09:16 +02:00
mt7621.mk ramips: use kiB instead of B for IMAGE_SIZE 2019-07-25 14:31:34 +02:00
rt288x.mk ramips: use kiB instead of B for IMAGE_SIZE 2019-07-25 14:31:34 +02:00
rt305x.mk ramips: use kiB instead of B for IMAGE_SIZE 2019-07-25 14:31:34 +02:00
rt3883.mk ramips: remove ralink_default_fw_size_xxx variables 2019-07-25 14:31:30 +02:00