This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Go to file
Felix Fietkau 3b3bf4d24a ath9k: fix ath9k_hw_apply_gpio_override so that it's effective
I discovered another bug in the ath9k WNDR3700 quirk fix from r23822.
ath9k_hw_apply_gpio_override was testing the original value of gpio_mask
to determine which bits were appropriate, instead of testing the shifted
value. Because bit 0 is always clear in the original value, this
resulted in no calls to set the GPIOs, an improperly-configured radio,
and reduced RSSI on other systems listening to the radio.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23890
2010-11-05 18:05:50 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include InstallDev: Move the "find" out of the lock critical section. 2010-11-04 12:42:37 +00:00
package ath9k: fix ath9k_hw_apply_gpio_override so that it's effective 2010-11-05 18:05:50 +00:00
scripts deptest: Capitalize failure message. Makes it easier to spot in the logs. 2010-11-04 11:30:10 +00:00
target target/linux: fix a wrong 2.6.37 patch (thank you acinonyx) 2010-11-05 17:41:13 +00:00
toolchain use gcc 4.3.5 for avr32 2010-11-04 14:18:04 +00:00
tools target/linux/orion: create subtargets (closes #8154) 2010-11-04 22:10:11 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in make the display support feature flag selectable 2010-11-02 16:26:57 +00:00
feeds.conf.default Add lxde feed to feeds.conf.default 2010-08-12 19:03:44 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk remove an obsolete comment for the flock template 2010-10-31 15:36:47 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org