openwrt/target/linux/ramips
David Bauer 3b013dcdf8 ramips: fix Archer C20i wireless MAC address
The TP-Link Archer C20i previously had a generic Ralink MAC address set
for both radios, as the caldata does only contain a generic MAC address.

Set the MAC address from the vendor firmware for both radios to assign
unique MAC addresses to every device.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-02 21:41:58 +01:00
..
base-files ramips: allow to set switchdev by board in ramips_set_preinit_iface 2019-12-17 15:09:48 +01:00
dts ramips: fix Archer C20i wireless MAC address 2020-01-02 21:41:58 +01:00
files-4.14/drivers ramips: ethernet: Replace random_ether_addr with eth_hw_addr_random 2019-10-27 14:13:47 +01:00
image ramips: add support for TP-Link RE200 v1 2019-12-31 13:23:55 +01:00
mt76x8 ramips: fix switch setup for Xiaomi MiWiFi Nano 2019-12-31 12:59:23 +01:00
mt7620 ramips: convert TP-Link MT7620 boards to tpt trigger 2020-01-02 21:41:58 +01:00
mt7621 ramips: add label MAC address for Mikrotik RB750Gr3 2019-12-23 02:24:55 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
rt288x ramips: rt288x: use flash location for wan_mac in 02_network 2019-12-12 13:11:49 +01:00
rt305x ramips: rt305x: use flash location for wan_mac in 02_network 2019-12-12 13:11:58 +01:00
rt3883 ramips: fix USB LED for Belkin F9K1109v1 2019-12-20 15:54:33 +01:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk kernel: Fix kmod-regmap split 2019-01-27 11:07:14 +01:00