Andrew Cameron d93da0d016 ath79: add support for TP-Link CPE610 v2 ... TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector - Power, LAN, WLAN5G green LEDs - 3x green RSSI LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>		2020-06-20 13:03:39 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add mikrotik subtarget	2020-03-17 11:50:47 +01:00
dts	ath79: add support for TP-Link CPE610 v2	2020-06-20 13:03:39 +02:00
files	ath79: add Mikrotik rb4xx series drivers	2020-06-15 21:16:18 +02:00
generic	ath79: add support for TP-Link CPE610 v2	2020-06-20 13:03:39 +02:00
image	ath79: add support for TP-Link CPE610 v2	2020-06-20 13:03:39 +02:00
mikrotik	treewide: drop shebang from non-executable target files	2020-06-16 14:26:33 +02:00
nand	ath79/nand: add support for Netgear WNDR4300SW	2020-05-24 14:44:00 +02:00
patches-4.19	ath79: add Mikrotik rb4xx series drivers	2020-06-15 21:16:18 +02:00
patches-5.4	ath79: add Mikrotik rb4xx series drivers	2020-06-15 21:16:18 +02:00
tiny	ath79: add support for TP-Link TL-WA801ND v3/v4	2020-06-19 15:50:29 +02:00
config-4.19	ath79: define CONFIG_MFD_RB4XX_CPLD to fix build breakage	2020-06-17 19:50:54 +02:00
config-5.4	ath79: define CONFIG_MFD_RB4XX_CPLD to fix build breakage	2020-06-17 19:50:54 +02:00
Makefile	ath79: add mikrotik subtarget	2020-03-17 11:50:47 +01:00
modules.mk