mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
14940aee45
Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
55 lines
1.9 KiB
Diff
55 lines
1.9 KiB
Diff
From b2f7c18c351737c2a053c39c09ef50870fd78c06 Mon Sep 17 00:00:00 2001
|
|
From: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
Date: Thu, 14 Nov 2019 17:03:25 +0200
|
|
Subject: [PATCH] net: mscc: ocelot: adjust MTU on the CPU port in NPI mode
|
|
|
|
When using the NPI port, the DSA tag is passed through Ethernet, so the
|
|
switch's MAC needs to accept it as it comes from the DSA master. Increase
|
|
the MTU on the external CPU port to account for the length of the
|
|
injection header.
|
|
|
|
Without this patch, MTU-sized frames are dropped by the switch's CPU
|
|
port on xmit, which is especially obvious in TCP sessions.
|
|
|
|
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
|
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/ethernet/mscc/ocelot.c | 9 +++++++++
|
|
drivers/net/ethernet/mscc/ocelot.h | 2 ++
|
|
2 files changed, 11 insertions(+)
|
|
|
|
--- a/drivers/net/ethernet/mscc/ocelot.c
|
|
+++ b/drivers/net/ethernet/mscc/ocelot.c
|
|
@@ -2229,9 +2229,18 @@ void ocelot_set_cpu_port(struct ocelot *
|
|
* Only one port can be an NPI at the same time.
|
|
*/
|
|
if (cpu < ocelot->num_phys_ports) {
|
|
+ int mtu = VLAN_ETH_FRAME_LEN + OCELOT_TAG_LEN;
|
|
+
|
|
ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
|
|
QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu),
|
|
QSYS_EXT_CPU_CFG);
|
|
+
|
|
+ if (injection == OCELOT_TAG_PREFIX_SHORT)
|
|
+ mtu += OCELOT_SHORT_PREFIX_LEN;
|
|
+ else if (injection == OCELOT_TAG_PREFIX_LONG)
|
|
+ mtu += OCELOT_LONG_PREFIX_LEN;
|
|
+
|
|
+ ocelot_port_set_mtu(ocelot, cpu, mtu);
|
|
}
|
|
|
|
/* CPU port Injection/Extraction configuration */
|
|
--- a/drivers/net/ethernet/mscc/ocelot.h
|
|
+++ b/drivers/net/ethernet/mscc/ocelot.h
|
|
@@ -65,6 +65,8 @@ struct frame_info {
|
|
#define IFH_REW_OP_ORIGIN_PTP 0x5
|
|
|
|
#define OCELOT_TAG_LEN 16
|
|
+#define OCELOT_SHORT_PREFIX_LEN 4
|
|
+#define OCELOT_LONG_PREFIX_LEN 16
|
|
|
|
#define OCELOT_SPEED_2500 0
|
|
#define OCELOT_SPEED_1000 1
|