openwrt/target
Piotr Dymacz 3959110c5b ar71xx: add support for ALFA Network AP121F
ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users.
Device is based on Atheros AR9331 WiSoC and is running a custom version
(updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware.

Specification:

- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR1)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz
- 1x microSD (optional, on separate PCB)
- 3x LED, 1x button, 1x switch
- UART header on PCB

Flash instruction (under U-Boot web recovery mode):

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
   wait for first blink of all LEDs (indicates network setup), then keep
   button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-23 00:26:51 +02:00
..
imagebuilder imagebuilder: fix bundling of DTS sources 2017-05-16 17:38:33 +02:00
linux ar71xx: add support for ALFA Network AP121F 2017-07-23 00:26:51 +02:00
sdk sdk: emit proper tag references for base URLs 2017-02-19 20:50:24 +01:00
toolchain target/toolchain: Fix toolchain packaging without package build 2016-09-06 11:40:12 +02:00
Config.in kernel: add plan 9 fs package 2016-08-11 10:45:33 +02:00
Makefile sdk: depend on linux/install 2016-11-04 16:14:51 +01:00