mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
62b7f5931c
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry-picked from commit f07e572f64)
124 lines
2.6 KiB
Diff
124 lines
2.6 KiB
Diff
From 01f45f7d4403e40f28f626296bec3ccae1b1f65b Mon Sep 17 00:00:00 2001
|
|
From: Matthias Reichl <hias@horus.com>
|
|
Date: Sat, 30 Nov 2019 23:10:26 +0100
|
|
Subject: [PATCH] rpi-cirrus-wm5102-overlay: fix pinctrl configuration
|
|
|
|
Separate GPIOs connected to wm5102 and wm8804 into 2 pinctrl
|
|
blocks and properly reference them from the DT nodes to have
|
|
correct pinmux owners.
|
|
|
|
Setup spi0 to use only one CS line on GPIO7 so that GPIO8 is
|
|
no longer claimed by spi0 but can be used by wm8804.
|
|
|
|
Signed-off-by: Matthias Reichl <hias@horus.com>
|
|
---
|
|
.../overlays/rpi-cirrus-wm5102-overlay.dts | 40 ++++++++++++++-----
|
|
1 file changed, 30 insertions(+), 10 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts
|
|
@@ -18,19 +18,31 @@
|
|
fragment@1 {
|
|
target = <&gpio>;
|
|
__overlay__ {
|
|
- wlf_pins: wlf_pins {
|
|
- brcm,pins = <17 22 27 8>;
|
|
+ wlf_5102_pins: wlf_5102_pins {
|
|
+ brcm,pins = <17 22 27>;
|
|
brcm,function = <
|
|
BCM2835_FSEL_GPIO_OUT
|
|
BCM2835_FSEL_GPIO_OUT
|
|
BCM2835_FSEL_GPIO_IN
|
|
- BCM2835_FSEL_GPIO_OUT
|
|
>;
|
|
};
|
|
+ wlf_8804_pins: wlf_8804_pins {
|
|
+ brcm,pins = <8>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
|
+ };
|
|
};
|
|
};
|
|
|
|
fragment@2 {
|
|
+ target = <&spi0_cs_pins>;
|
|
+ __overlay__ {
|
|
+ brcm,pins = <7>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+
|
|
+ fragment@3 {
|
|
target-path = "/";
|
|
__overlay__ {
|
|
rpi_cirrus_reg_1v8: rpi_cirrus_reg_1v8 {
|
|
@@ -43,30 +55,34 @@
|
|
};
|
|
};
|
|
|
|
- fragment@3 {
|
|
+ fragment@4 {
|
|
target = <&spidev0>;
|
|
__overlay__ {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
- fragment@4 {
|
|
+ fragment@5 {
|
|
target = <&spidev1>;
|
|
__overlay__ {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
- fragment@5 {
|
|
+ fragment@6 {
|
|
target = <&spi0>;
|
|
__overlay__ {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
+ cs-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
|
|
|
- wm5102@1{
|
|
+ wm5102@0{
|
|
compatible = "wlf,wm5102";
|
|
- reg = <1>;
|
|
+ reg = <0>;
|
|
+
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&wlf_5102_pins>;
|
|
|
|
spi-max-frequency = <500000>;
|
|
|
|
@@ -123,7 +139,7 @@
|
|
};
|
|
};
|
|
|
|
- fragment@6 {
|
|
+ fragment@7 {
|
|
target = <&i2c1>;
|
|
__overlay__ {
|
|
status = "okay";
|
|
@@ -134,6 +150,10 @@
|
|
compatible = "wlf,wm8804";
|
|
reg = <0x3b>;
|
|
status = "okay";
|
|
+
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&wlf_8804_pins>;
|
|
+
|
|
PVDD-supply = <&vdd_3v3_reg>;
|
|
DVDD-supply = <&vdd_3v3_reg>;
|
|
wlf,reset-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
|
|
@@ -141,7 +161,7 @@
|
|
};
|
|
};
|
|
|
|
- fragment@7 {
|
|
+ fragment@8 {
|
|
target = <&sound>;
|
|
__overlay__ {
|
|
compatible = "wlf,rpi-cirrus";
|