openwrt/target/linux/bcm27xx/patches-5.15/950-0580-drm-vc4-Ensure-vc4_hdmi-doesn-t-use-2711-HPD-registe.patch
John Audia d6d8851d12 kernel: bump 5.15 to 5.15.100
Manually rebased:
        bcm27xx/patches-5.15/950-0421-Support-RPi-DPI-interface-in-mode6-for-18-bit-color.patch
        bcm27xx/patches-5.15/950-0706-media-i2c-imx219-Scale-the-pixel-clock-rate-for-the-.patch
        ramips/patches-5.15/810-uvc-add-iPassion-iP2970-support.patch

Removed upstreamed:
        bcm27xx/patches-5.15/950-0707-drm-vc4-For-DPI-MEDIA_BUS_FMT_RGB565_1X16-is-mode-1-.patch[1]
        bcm27xx/patches-5.15/950-0596-drm-vc4-dpi-Add-option-for-inverting-pixel-clock-and.patch[2]
        ipq807x/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch [3]
        ipq807x/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch [4]
        ipq807x/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch [5]
        ipq807x/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch [6]
        ipq807x/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch [7]
        ipq807x/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch [8]
        ipq807x/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch [9]
        ipq807x/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch [10]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.99&id=d2991e6b30020e286f2dd9d3b4f43548c547caa6
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/gpu/drm/vc4/vc4_dpi.c?h=v5.15.100&id=8e04aaffb6de5f1ae61de7b671c1531172ccf429
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=a55a645aa303a3f7ec37db69822d5420657626da
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=d9df682bcea57fa25f37bbf17eae56fa05662635
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=7e6eeb5fb3aa9e5feffdb6e137dcc06f5f6410e1
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=e88204931d9a60634cd50bbc679f045439c4b91d
7.  https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=1563af0f28afd3b6d64ac79a2aecced3969c90bf
8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=feb8c71f015d416f1afe90e1f62cf51e47376c67
9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=69c7a270357a7d50ffd3471b14c60250041200e3
10. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=dd3d021ae5471d98adf81f1e897431c8657d0a18

Build system: x86_64
Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3
Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Tested-by: Robert Marko <robimarko@gmail.com> #ipq807x/Dynalink WRX36
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x/ax3600, x86_64/FW-7543B, ath79/tl-wdr3600, ipq806x/g10, ipq806x/nbg6817
2023-03-18 12:52:17 +01:00

86 lines
2.6 KiB
Diff

From 3542a39c5655242ba89bb4f51e9237cbb7e8cf09 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Fri, 19 Nov 2021 16:16:40 +0000
Subject: [PATCH] drm/vc4: Ensure vc4_hdmi doesn't use 2711 HPD
registers on Pi0-3
The existing logic was flawed in that it could try reading the
2711 specific registers for HPD on a CM1/3 where the HPD GPIO
hadn't been defined in DT.
Ensure we don't do the 2711 register read on invalid hardware,
and then
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 24 ++++++++++++++++--------
drivers/gpu/drm/vc4/vc4_hdmi.h | 3 +++
2 files changed, 19 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -206,14 +206,8 @@ vc4_hdmi_connector_detect(struct drm_con
if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
connected = true;
} else {
- unsigned long flags;
- u32 hotplug;
-
- spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
- hotplug = HDMI_READ(HDMI_HOTPLUG);
- spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
-
- if (hotplug & VC4_HDMI_HOTPLUG_CONNECTED)
+ if (vc4_hdmi->variant->hp_detect &&
+ vc4_hdmi->variant->hp_detect(vc4_hdmi))
connected = true;
}
@@ -1356,6 +1350,18 @@ static u32 vc5_hdmi_channel_map(struct v
return channel_map;
}
+static bool vc5_hdmi_hp_detect(struct vc4_hdmi *vc4_hdmi)
+{
+ unsigned long flags;
+ u32 hotplug;
+
+ spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
+ hotplug = HDMI_READ(HDMI_HOTPLUG);
+ spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
+
+ return !!(hotplug & VC4_HDMI_HOTPLUG_CONNECTED);
+}
+
/* HDMI audio codec callbacks */
static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi,
unsigned int samplerate)
@@ -2778,6 +2784,7 @@ static const struct vc4_hdmi_variant bcm
.phy_rng_disable = vc5_hdmi_phy_rng_disable,
.channel_map = vc5_hdmi_channel_map,
.supports_hdr = true,
+ .hp_detect = vc5_hdmi_hp_detect,
};
static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = {
@@ -2806,6 +2813,7 @@ static const struct vc4_hdmi_variant bcm
.phy_rng_disable = vc5_hdmi_phy_rng_disable,
.channel_map = vc5_hdmi_channel_map,
.supports_hdr = true,
+ .hp_detect = vc5_hdmi_hp_detect,
};
static const struct of_device_id vc4_hdmi_dt_match[] = {
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -102,6 +102,9 @@ struct vc4_hdmi_variant {
/* Enables HDR metadata */
bool supports_hdr;
+
+ /* Callback for hardware specific hotplug detect */
+ bool (*hp_detect)(struct vc4_hdmi *vc4_hdmi);
};
/* HDMI audio information */