openwrt/target/linux/brcm63xx/dts/hg655b.dts
Jonas Gorski 509c3211d6 brcm63xx: Add Huawei HG655b support
This patch adds support for the Huawei HG655b.

Nothing much special in this router, it's just another BCM6368 with
a Ralink RT3062 wifi chip and the calibration data embedded in the
main flash chip at offset 0x7c0000. There is also configuration data
used by the OEM firmware before the cal_data partition, this area is
protected by the board_data partition in this patch.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45708
2015-05-21 19:31:54 +00:00

111 lines
1.8 KiB
Plaintext

/dts-v1/;
/include/ "bcm6368.dtsi"
/ {
model = "Huawei HG655b";
compatible = "huawei,hg655b", "brcm,bcm6368";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
wps {
label = "wps";
gpios = <&gpio0 12 1>;
linux,code = <0x211>;
};
wlan {
label = "wlan";
gpios = <&gpio0 23 1>;
linux,code = <0xee>;
};
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl_green {
label = "HW65x:green:dsl";
gpios = <&gpio0 2 1>;
};
internet_green {
label = "HW65x:green:internet";
gpios = <&gpio0 5 1>;
};
lan1_green {
label = "HW65x:green:lan1";
gpios = <&gpio0 6 1>;
};
lan2_green {
label = "HW65x:green:lan2";
gpios = <&gpio0 7 1>;
};
lan3_green {
label = "HW65x:green:lan3";
gpios = <&gpio0 8 1>;
};
lan4_green {
label = "HW65x:green:lan4";
gpios = <&gpio0 9 1>;
};
usb_green {
label = "HW65x:green:usb";
gpios = <&gpio0 14 1>;
};
power_green {
label = "HW65x:green:power";
gpios = <&gpio0 22 1>;
default-state = "on";
};
voip_green {
label = "HW65x:green:voip";
gpios = <&gpio0 25 1>;
};
wps_green {
label = "HW65x:green:wps";
gpios = <&gpio0 27 1>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
};
linux@20000 {
label = "linux";
reg = <0x020000 0x770000>;
};
board_data@790000 {
label = "board_data";
reg = <0x790000 0x030000>;
};
cal_data@7c0000 {
label = "cal_data";
reg = <0x7c0000 0x020000>;
read-only;
};
nvram@7d0000 {
label = "nvram";
reg = <0x7e0000 0x020000>;
};
};