ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 18:19:02 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
3843c641d8
openwrt/target/linux/kirkwood/image/Makefile
Pawel Dembicki 3843c641d8 kirkwood: add support for Ctera C200 V1 NAS 
2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
  - NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
  - Lan: 1x GBE (Marvell 88E1116R-NNC1)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 2.0 port
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run: ctera_c200-v1_back_to_factory

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[apply sorting to device recipe]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-12-04 09:39:11 +09:00

286 lines
8.2 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2009-2013 OpenWrt.org
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR:=0x8000
# Some info about Ctera firmware:
# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
# 2. It contains two images: kernel and romdisk. Both are required.
# 3. Every image has header and trailer file.
# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
# 5. In header file are some strings used to describe image. It was decoded from
# factory image.
# 6. Version format in header file is restricted by Original FW.
# 7. Trailer file contains MD5 sum string of header and image file.
# 8. Firmware file must have <=24MB size.
define Build/ctera-firmware
mkdir -p $@.tmp
# Prepare header and trailer file for kernel
echo "# CTera firmware information file" > $@.tmp/header
echo "image_type=kernel" >> $@.tmp/header
echo "arch=Kirkwood" >> $@.tmp/header
echo "board=Any" >> $@.tmp/header
echo "version=3.1.22.30669" >> $@.tmp/header
echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
>> $@.tmp/header
cp $@ $@.tmp/kernel
echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
> $@.tmp/trailer
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-H gnu -C $@.tmp -cf $@.tar header kernel trailer
# Prepare header and trailer file for fake romdisk
echo "# CTera firmware information file" > $@.tmp/header
echo "image_type=romdisk" >> $@.tmp/header
echo "initrd=yes" >> $@.tmp/header
echo "arch=Kirkwood" >> $@.tmp/header
echo "board=Any" >> $@.tmp/header
echo "version=3.1.22.30669" >> $@.tmp/header
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
>> $@.tmp/header
rm -f $@
touch $@
$(call Build/append-uImage-fakehdr, ramdisk)
cp $@ $@.tmp/romdisk
echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
> $@.tmp/trailer
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-H gnu -C $@.tmp -rf $@.tar header romdisk trailer
mv $@.tar $@
rm -rf $@.tmp
endef
define Device/kernel-size-migration
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \
older versions (up to 21.02) due to kernel size restrictions. \
Upgrade via sysupgrade mechanism is not possible, so new \
installation via factory style image is required.
endef
define Device/Default
PROFILES := Default
DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL := kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
KERNEL_SUFFIX := -uImage
KERNEL_IN_UBI := 1
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-ubi
endef
define Device/checkpoint_l-50
DEVICE_VENDOR := Check Point
DEVICE_MODEL := L-50
DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-wolfssl
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += checkpoint_l-50
define Device/cisco_on100
DEVICE_VENDOR := Cisco Systems
DEVICE_MODEL := ON100
KERNEL_SIZE := 5376k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
DEVICE_PACKAGES := kmod-mvsdio
SUPPORTED_DEVICES += on100
endef
TARGET_DEVICES += cisco_on100
define Device/cloudengines_pogoe02
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug E02
DEVICE_DTS := kirkwood-pogo_e02
SUPPORTED_DEVICES += pogo_e02
endef
TARGET_DEVICES += cloudengines_pogoe02
define Device/cloudengines_pogoplugv4
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug V4
DEVICE_DTS := kirkwood-pogoplug-series-4
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
kmod-gpio-button-hotplug
endef
TARGET_DEVICES += cloudengines_pogoplugv4
define Device/ctera_c200-v1
DEVICE_VENDOR := Ctera
DEVICE_MODEL := C200
DEVICE_VARIANT := V1
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
KERNEL_IN_UBI :=
KERNEL_SUFFIX := -factory.firm
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += ctera_c200-v1
define Device/globalscale_sheevaplug
DEVICE_VENDOR := Globalscale
DEVICE_MODEL := Sheevaplug
DEVICE_PACKAGES := kmod-mvsdio
endef
TARGET_DEVICES += globalscale_sheevaplug
define Device/iom_iconnect-1.1
DEVICE_VENDOR := Iomega
DEVICE_MODEL := Iconnect
DEVICE_DTS := kirkwood-iconnect
SUPPORTED_DEVICES += iconnect
endef
TARGET_DEVICES += iom_iconnect-1.1
define Device/iom_ix2-200
DEVICE_VENDOR := Iomega
DEVICE_MODEL := StorCenter ix2-200
DEVICE_DTS := kirkwood-iomega_ix2_200
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm63
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 3072k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE_SIZE := 31744k
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
endef
TARGET_DEVICES += iom_ix2-200
define Device/linksys
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-mwl8k wpad-basic-wolfssl kmod-gpio-button-hotplug
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
endef
define Device/linksys_e4200-v2
$(Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := E4200
DEVICE_VARIANT := v2
KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_e4200-v2
define Device/linksys_ea3500
$(Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := EA3500
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,audi linksys-audi
endef
TARGET_DEVICES += linksys_ea3500
define Device/linksys_ea4500
$(Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := EA4500
KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_ea4500
define Device/raidsonic_ib-nas62x0
DEVICE_VENDOR := RaidSonic
DEVICE_MODEL := ICY BOX IB-NAS62x0
DEVICE_DTS := kirkwood-ib62x0
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
SUPPORTED_DEVICES += ib62x0
endef
TARGET_DEVICES += raidsonic_ib-nas62x0
define Device/seagate_blackarmor-nas220
DEVICE_VENDOR := Seagate
DEVICE_MODEL := Blackarmor NAS220
DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
mdadm kmod-gpio-button-hotplug
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
UBINIZE_OPTS := -e 1
endef
TARGET_DEVICES += seagate_blackarmor-nas220
define Device/seagate_dockstar
DEVICE_VENDOR := Seagate
DEVICE_MODEL := FreeAgent Dockstar
SUPPORTED_DEVICES += dockstar
endef
TARGET_DEVICES += seagate_dockstar
define Device/seagate_goflexnet
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexNet
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
SUPPORTED_DEVICES += goflexnet
endef
TARGET_DEVICES += seagate_goflexnet
define Device/seagate_goflexhome
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexHome
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
SUPPORTED_DEVICES += goflexhome
endef
TARGET_DEVICES += seagate_goflexhome
define Device/zyxel_nsa310b
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA310b
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm85
SUPPORTED_DEVICES += nsa310b
endef
TARGET_DEVICES += zyxel_nsa310b
define Device/zyxel_nsa310s
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA310S
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
endef
TARGET_DEVICES += zyxel_nsa310s
define Device/zyxel_nsa325
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA325
DEVICE_VARIANT := v1/v2
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
SUPPORTED_DEVICES += nsa325
endef
TARGET_DEVICES += zyxel_nsa325
$(eval $(call BuildImage))
Reference in New Issue View Git Blame Copy Permalink