Pawel Dembicki 3843c641d8 kirkwood: add support for Ctera C200 V1 NAS ... 2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 256MB (Samsung 216 K9F2G08U0C) - Lan: 1x GBE (Marvell 88E1116R-NNC1) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 2.0 port - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ctera_c200-v1_back_to_factory Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [apply sorting to device recipe] Signed-off-by: Sungbo Eo <mans0n@gorani.run>		2021-12-04 09:39:11 +09:00
..
01_leds	treewide: remove execute bit and shebang from board.d files	2021-03-06 11:30:06 +01:00
02_network	kirkwood: add support for Ctera C200 V1 NAS	2021-12-04 09:39:11 +09:00
03_gpio_switches	treewide: remove execute bit and shebang from board.d files	2021-03-06 11:30:06 +01:00
05_compat-version	kirkwood: increase kernel size of Linksyses	2021-09-13 18:36:15 +02:00