mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
76d079204d
Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
523 lines
16 KiB
Diff
523 lines
16 KiB
Diff
Content-Type: text/plain; charset="utf-8"
|
|
MIME-Version: 1.0
|
|
Content-Transfer-Encoding: 7bit
|
|
Subject: spi: qup: Add DMA capabilities
|
|
From: Andy Gross <agross@codeaurora.org>
|
|
X-Patchwork-Id: 4432401
|
|
Message-Id: <1403816781-31008-1-git-send-email-agross@codeaurora.org>
|
|
To: Mark Brown <broonie@kernel.org>
|
|
Cc: linux-spi@vger.kernel.org, Sagar Dharia <sdharia@codeaurora.org>,
|
|
Daniel Sneddon <dsneddon@codeaurora.org>,
|
|
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
|
|
"Ivan T. Ivanov" <iivanov@mm-sol.com>,
|
|
linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
|
|
linux-arm-msm@vger.kernel.org, Andy Gross <agross@codeaurora.org>
|
|
Date: Thu, 26 Jun 2014 16:06:21 -0500
|
|
|
|
This patch adds DMA capabilities to the spi-qup driver. If DMA channels are
|
|
present, the QUP will use DMA instead of block mode for transfers to/from SPI
|
|
peripherals for transactions larger than the length of a block.
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
|
|
---
|
|
.../devicetree/bindings/spi/qcom,spi-qup.txt | 10 +
|
|
drivers/spi/spi-qup.c | 361 ++++++++++++++++++--
|
|
2 files changed, 350 insertions(+), 21 deletions(-)
|
|
|
|
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
|
|
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
|
|
@@ -27,6 +27,11 @@ Optional properties:
|
|
- spi-max-frequency: Specifies maximum SPI clock frequency,
|
|
Units - Hz. Definition as per
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
+- dmas : Two DMA channel specifiers following the convention outlined
|
|
+ in bindings/dma/dma.txt
|
|
+- dma-names: Names for the dma channels, if present. There must be at
|
|
+ least one channel named "tx" for transmit and named "rx" for
|
|
+ receive.
|
|
- num-cs: total number of chipselects
|
|
- cs-gpios: should specify GPIOs used for chipselects.
|
|
The gpios will be referred to as reg = <index> in the SPI child
|
|
@@ -51,6 +56,10 @@ Example:
|
|
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
|
|
+ dmas = <&blsp2_bam 2>,
|
|
+ <&blsp2_bam 3>;
|
|
+ dma-names = "rx", "tx";
|
|
+
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi8_default>;
|
|
|
|
--- a/drivers/spi/spi-qup.c
|
|
+++ b/drivers/spi/spi-qup.c
|
|
@@ -22,6 +22,8 @@
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/spi/spi.h>
|
|
+#include <linux/dmaengine.h>
|
|
+#include <linux/dma-mapping.h>
|
|
|
|
#define QUP_CONFIG 0x0000
|
|
#define QUP_STATE 0x0004
|
|
@@ -116,6 +118,8 @@
|
|
|
|
#define SPI_NUM_CHIPSELECTS 4
|
|
|
|
+#define SPI_MAX_XFER (SZ_64K - 64)
|
|
+
|
|
/* high speed mode is when bus rate is greater then 26MHz */
|
|
#define SPI_HS_MIN_RATE 26000000
|
|
#define SPI_MAX_RATE 50000000
|
|
@@ -143,6 +147,17 @@ struct spi_qup {
|
|
int tx_bytes;
|
|
int rx_bytes;
|
|
int qup_v1;
|
|
+
|
|
+ int use_dma;
|
|
+
|
|
+ struct dma_chan *rx_chan;
|
|
+ struct dma_slave_config rx_conf;
|
|
+ struct dma_chan *tx_chan;
|
|
+ struct dma_slave_config tx_conf;
|
|
+ dma_addr_t rx_dma;
|
|
+ dma_addr_t tx_dma;
|
|
+ void *dummy;
|
|
+ atomic_t dma_outstanding;
|
|
};
|
|
|
|
|
|
@@ -266,6 +281,221 @@ static void spi_qup_fifo_write(struct sp
|
|
}
|
|
}
|
|
|
|
+static void qup_dma_callback(void *data)
|
|
+{
|
|
+ struct spi_qup *controller = data;
|
|
+
|
|
+ if (atomic_dec_and_test(&controller->dma_outstanding))
|
|
+ complete(&controller->done);
|
|
+}
|
|
+
|
|
+static int spi_qup_do_dma(struct spi_qup *controller, struct spi_transfer *xfer)
|
|
+{
|
|
+ struct dma_async_tx_descriptor *rxd, *txd;
|
|
+ dma_cookie_t rx_cookie, tx_cookie;
|
|
+ u32 xfer_len, rx_align = 0, tx_align = 0, n_words;
|
|
+ struct scatterlist tx_sg[2], rx_sg[2];
|
|
+ int ret = 0;
|
|
+ u32 bytes_to_xfer = xfer->len;
|
|
+ u32 offset = 0;
|
|
+ u32 rx_nents = 0, tx_nents = 0;
|
|
+ dma_addr_t rx_dma = 0, tx_dma = 0, rx_dummy_dma = 0, tx_dummy_dma = 0;
|
|
+
|
|
+
|
|
+ if (xfer->rx_buf) {
|
|
+ rx_dma = dma_map_single(controller->dev, xfer->rx_buf,
|
|
+ xfer->len, DMA_FROM_DEVICE);
|
|
+
|
|
+ if (dma_mapping_error(controller->dev, rx_dma)) {
|
|
+ ret = -ENOMEM;
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ /* check to see if we need dummy buffer for leftover bytes */
|
|
+ rx_align = xfer->len % controller->in_blk_sz;
|
|
+ if (rx_align) {
|
|
+ rx_dummy_dma = dma_map_single(controller->dev,
|
|
+ controller->dummy, controller->in_fifo_sz,
|
|
+ DMA_FROM_DEVICE);
|
|
+
|
|
+ if (dma_mapping_error(controller->dev, rx_dummy_dma)) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_map_rx_dummy;
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (xfer->tx_buf) {
|
|
+ tx_dma = dma_map_single(controller->dev,
|
|
+ (void *)xfer->tx_buf, xfer->len, DMA_TO_DEVICE);
|
|
+
|
|
+ if (dma_mapping_error(controller->dev, tx_dma)) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_map_tx;
|
|
+ }
|
|
+
|
|
+ /* check to see if we need dummy buffer for leftover bytes */
|
|
+ tx_align = xfer->len % controller->out_blk_sz;
|
|
+ if (tx_align) {
|
|
+ memcpy(controller->dummy + SZ_1K,
|
|
+ xfer->tx_buf + xfer->len - tx_align,
|
|
+ tx_align);
|
|
+ memset(controller->dummy + SZ_1K + tx_align, 0,
|
|
+ controller->out_blk_sz - tx_align);
|
|
+
|
|
+ tx_dummy_dma = dma_map_single(controller->dev,
|
|
+ controller->dummy + SZ_1K,
|
|
+ controller->out_blk_sz, DMA_TO_DEVICE);
|
|
+
|
|
+ if (dma_mapping_error(controller->dev, tx_dummy_dma)) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_map_tx_dummy;
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+
|
|
+ atomic_set(&controller->dma_outstanding, 0);
|
|
+
|
|
+ while (bytes_to_xfer > 0) {
|
|
+ xfer_len = min_t(u32, bytes_to_xfer, SPI_MAX_XFER);
|
|
+ n_words = DIV_ROUND_UP(xfer_len, controller->w_size);
|
|
+
|
|
+ /* write out current word count to controller */
|
|
+ writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
|
|
+ writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
|
|
+
|
|
+ reinit_completion(&controller->done);
|
|
+
|
|
+ if (xfer->tx_buf) {
|
|
+ /* recalc align for each transaction */
|
|
+ tx_align = xfer_len % controller->out_blk_sz;
|
|
+
|
|
+ if (tx_align)
|
|
+ tx_nents = 2;
|
|
+ else
|
|
+ tx_nents = 1;
|
|
+
|
|
+ /* initialize scatterlists */
|
|
+ sg_init_table(tx_sg, tx_nents);
|
|
+ sg_dma_len(&tx_sg[0]) = xfer_len - tx_align;
|
|
+ sg_dma_address(&tx_sg[0]) = tx_dma + offset;
|
|
+
|
|
+ /* account for non block size transfer */
|
|
+ if (tx_align) {
|
|
+ sg_dma_len(&tx_sg[1]) = controller->out_blk_sz;
|
|
+ sg_dma_address(&tx_sg[1]) = tx_dummy_dma;
|
|
+ }
|
|
+
|
|
+ txd = dmaengine_prep_slave_sg(controller->tx_chan,
|
|
+ tx_sg, tx_nents, DMA_MEM_TO_DEV, 0);
|
|
+ if (!txd) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_unmap;
|
|
+ }
|
|
+
|
|
+ atomic_inc(&controller->dma_outstanding);
|
|
+
|
|
+ txd->callback = qup_dma_callback;
|
|
+ txd->callback_param = controller;
|
|
+
|
|
+ tx_cookie = dmaengine_submit(txd);
|
|
+
|
|
+ dma_async_issue_pending(controller->tx_chan);
|
|
+ }
|
|
+
|
|
+ if (xfer->rx_buf) {
|
|
+ /* recalc align for each transaction */
|
|
+ rx_align = xfer_len % controller->in_blk_sz;
|
|
+
|
|
+ if (rx_align)
|
|
+ rx_nents = 2;
|
|
+ else
|
|
+ rx_nents = 1;
|
|
+
|
|
+ /* initialize scatterlists */
|
|
+ sg_init_table(rx_sg, rx_nents);
|
|
+ sg_dma_address(&rx_sg[0]) = rx_dma + offset;
|
|
+ sg_dma_len(&rx_sg[0]) = xfer_len - rx_align;
|
|
+
|
|
+ /* account for non block size transfer */
|
|
+ if (rx_align) {
|
|
+ sg_dma_len(&rx_sg[1]) = controller->in_blk_sz;
|
|
+ sg_dma_address(&rx_sg[1]) = rx_dummy_dma;
|
|
+ }
|
|
+
|
|
+ rxd = dmaengine_prep_slave_sg(controller->rx_chan,
|
|
+ rx_sg, rx_nents, DMA_DEV_TO_MEM, 0);
|
|
+ if (!rxd) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_unmap;
|
|
+ }
|
|
+
|
|
+ atomic_inc(&controller->dma_outstanding);
|
|
+
|
|
+ rxd->callback = qup_dma_callback;
|
|
+ rxd->callback_param = controller;
|
|
+
|
|
+ rx_cookie = dmaengine_submit(rxd);
|
|
+
|
|
+ dma_async_issue_pending(controller->rx_chan);
|
|
+ }
|
|
+
|
|
+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
|
|
+ dev_warn(controller->dev, "cannot set EXECUTE state\n");
|
|
+ goto err_unmap;
|
|
+ }
|
|
+
|
|
+ if (!wait_for_completion_timeout(&controller->done,
|
|
+ msecs_to_jiffies(1000))) {
|
|
+ ret = -ETIMEDOUT;
|
|
+
|
|
+ /* clear out all the DMA transactions */
|
|
+ if (xfer->tx_buf)
|
|
+ dmaengine_terminate_all(controller->tx_chan);
|
|
+ if (xfer->rx_buf)
|
|
+ dmaengine_terminate_all(controller->rx_chan);
|
|
+
|
|
+ goto err_unmap;
|
|
+ }
|
|
+
|
|
+ if (rx_align)
|
|
+ memcpy(xfer->rx_buf + offset + xfer->len - rx_align,
|
|
+ controller->dummy, rx_align);
|
|
+
|
|
+ /* adjust remaining bytes to transfer */
|
|
+ bytes_to_xfer -= xfer_len;
|
|
+ offset += xfer_len;
|
|
+
|
|
+
|
|
+ /* reset mini-core state so we can program next transaction */
|
|
+ if (spi_qup_set_state(controller, QUP_STATE_RESET)) {
|
|
+ dev_err(controller->dev, "cannot set RESET state\n");
|
|
+ goto err_unmap;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ ret = 0;
|
|
+
|
|
+err_unmap:
|
|
+ if (tx_align)
|
|
+ dma_unmap_single(controller->dev, tx_dummy_dma,
|
|
+ controller->out_fifo_sz, DMA_TO_DEVICE);
|
|
+err_map_tx_dummy:
|
|
+ if (xfer->tx_buf)
|
|
+ dma_unmap_single(controller->dev, tx_dma, xfer->len,
|
|
+ DMA_TO_DEVICE);
|
|
+err_map_tx:
|
|
+ if (rx_align)
|
|
+ dma_unmap_single(controller->dev, rx_dummy_dma,
|
|
+ controller->in_fifo_sz, DMA_FROM_DEVICE);
|
|
+err_map_rx_dummy:
|
|
+ if (xfer->rx_buf)
|
|
+ dma_unmap_single(controller->dev, rx_dma, xfer->len,
|
|
+ DMA_FROM_DEVICE);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
|
|
{
|
|
struct spi_qup *controller = dev_id;
|
|
@@ -315,11 +545,13 @@ static irqreturn_t spi_qup_qup_irq(int i
|
|
error = -EIO;
|
|
}
|
|
|
|
- if (opflags & QUP_OP_IN_SERVICE_FLAG)
|
|
- spi_qup_fifo_read(controller, xfer);
|
|
+ if (!controller->use_dma) {
|
|
+ if (opflags & QUP_OP_IN_SERVICE_FLAG)
|
|
+ spi_qup_fifo_read(controller, xfer);
|
|
|
|
- if (opflags & QUP_OP_OUT_SERVICE_FLAG)
|
|
- spi_qup_fifo_write(controller, xfer);
|
|
+ if (opflags & QUP_OP_OUT_SERVICE_FLAG)
|
|
+ spi_qup_fifo_write(controller, xfer);
|
|
+ }
|
|
|
|
spin_lock_irqsave(&controller->lock, flags);
|
|
controller->error = error;
|
|
@@ -339,6 +571,8 @@ static int spi_qup_io_config(struct spi_
|
|
struct spi_qup *controller = spi_master_get_devdata(spi->master);
|
|
u32 config, iomode, mode;
|
|
int ret, n_words, w_size;
|
|
+ size_t dma_align = dma_get_cache_alignment();
|
|
+ u32 dma_available = 0;
|
|
|
|
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
|
|
dev_err(controller->dev, "too big size for loopback %d > %d\n",
|
|
@@ -367,6 +601,11 @@ static int spi_qup_io_config(struct spi_
|
|
n_words = xfer->len / w_size;
|
|
controller->w_size = w_size;
|
|
|
|
+ if (controller->rx_chan &&
|
|
+ IS_ALIGNED((size_t)xfer->tx_buf, dma_align) &&
|
|
+ IS_ALIGNED((size_t)xfer->rx_buf, dma_align))
|
|
+ dma_available = 1;
|
|
+
|
|
if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
|
|
mode = QUP_IO_M_MODE_FIFO;
|
|
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
|
|
@@ -374,19 +613,31 @@ static int spi_qup_io_config(struct spi_
|
|
/* must be zero for FIFO */
|
|
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
|
|
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
|
|
- } else {
|
|
+ controller->use_dma = 0;
|
|
+ } else if (!dma_available) {
|
|
mode = QUP_IO_M_MODE_BLOCK;
|
|
writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
|
|
writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
|
|
/* must be zero for BLOCK and BAM */
|
|
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
|
|
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
|
|
+ controller->use_dma = 0;
|
|
+ } else {
|
|
+ mode = QUP_IO_M_MODE_DMOV;
|
|
+ writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
|
|
+ writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
|
|
+ controller->use_dma = 1;
|
|
}
|
|
|
|
iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
|
|
/* Set input and output transfer mode */
|
|
iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
|
|
- iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
|
|
+
|
|
+ if (!controller->use_dma)
|
|
+ iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
|
|
+ else
|
|
+ iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
|
|
+
|
|
iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
|
|
iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
|
|
|
|
@@ -419,6 +670,14 @@ static int spi_qup_io_config(struct spi_
|
|
config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
|
|
config |= xfer->bits_per_word - 1;
|
|
config |= QUP_CONFIG_SPI_MODE;
|
|
+
|
|
+ if (controller->use_dma) {
|
|
+ if (!xfer->tx_buf)
|
|
+ config |= QUP_CONFIG_NO_OUTPUT;
|
|
+ if (!xfer->rx_buf)
|
|
+ config |= QUP_CONFIG_NO_INPUT;
|
|
+ }
|
|
+
|
|
writel_relaxed(config, controller->base + QUP_CONFIG);
|
|
|
|
/* only write to OPERATIONAL_MASK when register is present */
|
|
@@ -452,25 +711,29 @@ static int spi_qup_transfer_one(struct s
|
|
controller->tx_bytes = 0;
|
|
spin_unlock_irqrestore(&controller->lock, flags);
|
|
|
|
- if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
|
|
- dev_warn(controller->dev, "cannot set RUN state\n");
|
|
- goto exit;
|
|
- }
|
|
+ if (controller->use_dma) {
|
|
+ ret = spi_qup_do_dma(controller, xfer);
|
|
+ } else {
|
|
+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
|
|
+ dev_warn(controller->dev, "cannot set RUN state\n");
|
|
+ goto exit;
|
|
+ }
|
|
|
|
- if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
|
|
- dev_warn(controller->dev, "cannot set PAUSE state\n");
|
|
- goto exit;
|
|
- }
|
|
+ if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
|
|
+ dev_warn(controller->dev, "cannot set PAUSE state\n");
|
|
+ goto exit;
|
|
+ }
|
|
|
|
- spi_qup_fifo_write(controller, xfer);
|
|
+ spi_qup_fifo_write(controller, xfer);
|
|
|
|
- if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
|
|
- dev_warn(controller->dev, "cannot set EXECUTE state\n");
|
|
- goto exit;
|
|
- }
|
|
+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
|
|
+ dev_warn(controller->dev, "cannot set EXECUTE state\n");
|
|
+ goto exit;
|
|
+ }
|
|
|
|
- if (!wait_for_completion_timeout(&controller->done, timeout))
|
|
- ret = -ETIMEDOUT;
|
|
+ if (!wait_for_completion_timeout(&controller->done, timeout))
|
|
+ ret = -ETIMEDOUT;
|
|
+ }
|
|
exit:
|
|
spi_qup_set_state(controller, QUP_STATE_RESET);
|
|
spin_lock_irqsave(&controller->lock, flags);
|
|
@@ -554,6 +817,7 @@ static int spi_qup_probe(struct platform
|
|
master->transfer_one = spi_qup_transfer_one;
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
master->auto_runtime_pm = true;
|
|
+ master->dma_alignment = dma_get_cache_alignment();
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
@@ -619,6 +883,56 @@ static int spi_qup_probe(struct platform
|
|
QUP_ERROR_INPUT_UNDER_RUN | QUP_ERROR_OUTPUT_UNDER_RUN,
|
|
base + QUP_ERROR_FLAGS_EN);
|
|
|
|
+ /* allocate dma resources, if available */
|
|
+ controller->rx_chan = dma_request_slave_channel(&pdev->dev, "rx");
|
|
+ if (controller->rx_chan) {
|
|
+ controller->tx_chan =
|
|
+ dma_request_slave_channel(&pdev->dev, "tx");
|
|
+
|
|
+ if (!controller->tx_chan) {
|
|
+ dev_err(&pdev->dev, "Failed to allocate dma tx chan");
|
|
+ dma_release_channel(controller->rx_chan);
|
|
+ }
|
|
+
|
|
+ /* set DMA parameters */
|
|
+ controller->rx_conf.device_fc = 1;
|
|
+ controller->rx_conf.src_addr = res->start + QUP_INPUT_FIFO;
|
|
+ controller->rx_conf.src_maxburst = controller->in_blk_sz;
|
|
+
|
|
+ controller->tx_conf.device_fc = 1;
|
|
+ controller->tx_conf.dst_addr = res->start + QUP_OUTPUT_FIFO;
|
|
+ controller->tx_conf.dst_maxburst = controller->out_blk_sz;
|
|
+
|
|
+ if (dmaengine_slave_config(controller->rx_chan,
|
|
+ &controller->rx_conf)) {
|
|
+ dev_err(&pdev->dev, "failed to configure RX channel\n");
|
|
+
|
|
+ dma_release_channel(controller->rx_chan);
|
|
+ dma_release_channel(controller->tx_chan);
|
|
+ controller->tx_chan = NULL;
|
|
+ controller->rx_chan = NULL;
|
|
+ } else if (dmaengine_slave_config(controller->tx_chan,
|
|
+ &controller->tx_conf)) {
|
|
+ dev_err(&pdev->dev, "failed to configure TX channel\n");
|
|
+
|
|
+ dma_release_channel(controller->rx_chan);
|
|
+ dma_release_channel(controller->tx_chan);
|
|
+ controller->tx_chan = NULL;
|
|
+ controller->rx_chan = NULL;
|
|
+ }
|
|
+
|
|
+ controller->dummy = devm_kmalloc(controller->dev, PAGE_SIZE,
|
|
+ GFP_KERNEL);
|
|
+
|
|
+ if (!controller->dummy) {
|
|
+ dma_release_channel(controller->rx_chan);
|
|
+ dma_release_channel(controller->tx_chan);
|
|
+ controller->tx_chan = NULL;
|
|
+ controller->rx_chan = NULL;
|
|
+ }
|
|
+ }
|
|
+
|
|
+
|
|
writel_relaxed(0, base + SPI_CONFIG);
|
|
writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
|
|
|
|
@@ -731,6 +1045,11 @@ static int spi_qup_remove(struct platfor
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ if (controller->rx_chan)
|
|
+ dma_release_channel(controller->rx_chan);
|
|
+ if (controller->tx_chan)
|
|
+ dma_release_channel(controller->tx_chan);
|
|
+
|
|
clk_disable_unprepare(controller->cclk);
|
|
clk_disable_unprepare(controller->iclk);
|
|
|