mirror of
https://github.com/openwrt/openwrt.git
synced 2025-03-12 23:44:26 +00:00
7560af7647
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
This commit switches the control of the leds connected to the Maxlinear GPY211C PHY to an upstream solution. There should be no functional changes. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
463 lines
8.3 KiB
Plaintext
463 lines
8.3 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "ASUS TUF-AX6000";
|
|
compatible = "asus,tuf-ax6000", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
label-mac-device = &gmac0;
|
|
led-boot = &led_system;
|
|
led-failsafe = &led_system;
|
|
led-running = &led_system;
|
|
led-upgrade = &led_system;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-override = "";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x20000000>;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
mesh {
|
|
label = "wps";
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
wlan {
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
led_system: system {
|
|
label = "white:system";
|
|
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wan-red {
|
|
function = LED_FUNCTION_WAN;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
cover-blue {
|
|
label = "blue:cover";
|
|
gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
cover-red {
|
|
label = "red:cover";
|
|
gpios = <&pio 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
cover-green {
|
|
label = "green:cover";
|
|
gpios = <&pio 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
/* LAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
nvmem-cells = <&macaddr_factory_4>;
|
|
nvmem-cell-names = "mac-address";
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
/* WAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy6>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <50000>;
|
|
reset-post-delay-us = <20000>;
|
|
|
|
phy5: phy@5 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led-0 {
|
|
reg = <0>;
|
|
active-high;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
function = LED_FUNCTION_LAN;
|
|
};
|
|
};
|
|
};
|
|
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led-0 {
|
|
reg = <0>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
};
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
conf-pu {
|
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
drive-strength = <8>;
|
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
};
|
|
conf-pd {
|
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
drive-strength = <8>;
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
wf_dbdc_pins: wf-dbdc-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_dbdc";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_flash_pins>;
|
|
status = "okay";
|
|
|
|
spi_nand_flash: flash@0 {
|
|
compatible = "u-boot-dont-touch-spi-nand";
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
spi-max-frequency = <20000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
/*
|
|
* ASUS bootloader tries to replace the partitions defined in
|
|
* Device Tree and by that also deletes all additional properties
|
|
* needed for UBI and NVMEM-on-UBI.
|
|
* Prevent this from happening by tricking the loader to delete and
|
|
* replace a bait node instead (works with older bootloaders).
|
|
*/
|
|
partitions: dummy {
|
|
compatible = "u-boot-dummy-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x0>;
|
|
label = "remove_me";
|
|
};
|
|
};
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x400000>;
|
|
label = "bootloader";
|
|
read-only;
|
|
};
|
|
|
|
partition@400000 {
|
|
compatible = "linux,ubi";
|
|
reg = <0x400000 0xfc00000>;
|
|
label = "UBI_DEV";
|
|
|
|
volumes {
|
|
ubi_factory: ubi-volume-factory {
|
|
volname = "Factory";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ubi_factory {
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
macaddr_factory_4: macaddr@4 {
|
|
reg = <0x4 0x6>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan4";
|
|
phy-handle = <&swphy1>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
phy-handle = <&swphy2>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan2";
|
|
phy-handle = <&swphy3>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan1";
|
|
phy-handle = <&swphy4>;
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan5";
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy5>;
|
|
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
swphy1: phy@1 {
|
|
reg = <1>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy2: phy@2 {
|
|
reg = <2>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy3: phy@3 {
|
|
reg = <3>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy4: phy@4 {
|
|
reg = <4>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
nvmem-cells = <&eeprom_factory_0>;
|
|
nvmem-cell-names = "eeprom";
|
|
pinctrl-names = "default", "dbdc";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
pinctrl-1 = <&wf_dbdc_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|