mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
9703a2adcc
Refresh all patches on top of kernel 5.10.138. The following patches were applied upstream: bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more. bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch Fixes:89956c6532
("kernel: bump 5.10 to 5.10.138") Fixes:4209c33ae2
("kernel: bump 5.10 to 5.10.137") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
120 lines
3.7 KiB
Diff
120 lines
3.7 KiB
Diff
From 29e5bf9305e98a57a895d6806fafa6e67f257fd8 Mon Sep 17 00:00:00 2001
|
|
From: Matthias Reichl <hias@horus.com>
|
|
Date: Tue, 17 Mar 2020 12:12:22 +0100
|
|
Subject: [PATCH] drm/vc4: add iec958 controls to vc4_hdmi
|
|
|
|
Although vc4 get an IEC958 formatted stream passed in from userspace
|
|
the driver needs the info from the channel status bits to properly
|
|
set up the hardware, eg for HBR passthrough.
|
|
|
|
Add iec958 controls so the channel status bits can be passed in
|
|
from userspace.
|
|
|
|
Signed-off-by: Matthias Reichl <hias@horus.com>
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_hdmi.c | 60 ++++++++++++++++++++++++++++++++++
|
|
drivers/gpu/drm/vc4/vc4_hdmi.h | 2 ++
|
|
2 files changed, 62 insertions(+)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
@@ -44,6 +44,7 @@
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/rational.h>
|
|
#include <linux/reset.h>
|
|
+#include <sound/asoundef.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
#include <sound/pcm_drm_eld.h>
|
|
#include <sound/pcm_params.h>
|
|
@@ -1176,6 +1177,47 @@ static int vc4_hdmi_audio_eld_ctl_get(st
|
|
return 0;
|
|
}
|
|
|
|
+static int vc4_spdif_info(struct snd_kcontrol *kcontrol,
|
|
+ struct snd_ctl_elem_info *uinfo)
|
|
+{
|
|
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
|
|
+ uinfo->count = 1;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int vc4_spdif_playback_get(struct snd_kcontrol *kcontrol,
|
|
+ struct snd_ctl_elem_value *ucontrol)
|
|
+{
|
|
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
|
|
+ struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
|
|
+
|
|
+ memcpy(ucontrol->value.iec958.status, vc4_hdmi->audio.iec_status,
|
|
+ sizeof(vc4_hdmi->audio.iec_status));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int vc4_spdif_playback_put(struct snd_kcontrol *kcontrol,
|
|
+ struct snd_ctl_elem_value *ucontrol)
|
|
+{
|
|
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
|
|
+ struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
|
|
+
|
|
+ memcpy(vc4_hdmi->audio.iec_status, ucontrol->value.iec958.status,
|
|
+ sizeof(vc4_hdmi->audio.iec_status));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int vc4_spdif_mask_get(struct snd_kcontrol *kcontrol,
|
|
+ struct snd_ctl_elem_value *ucontrol)
|
|
+{
|
|
+ memset(ucontrol->value.iec958.status, 0xff,
|
|
+ sizeof_field(struct vc4_hdmi_audio, iec_status));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = {
|
|
{
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
@@ -1185,6 +1227,19 @@ static const struct snd_kcontrol_new vc4
|
|
.info = vc4_hdmi_audio_eld_ctl_info,
|
|
.get = vc4_hdmi_audio_eld_ctl_get,
|
|
},
|
|
+ {
|
|
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
|
|
+ .info = vc4_spdif_info,
|
|
+ .get = vc4_spdif_playback_get,
|
|
+ .put = vc4_spdif_playback_put,
|
|
+ },
|
|
+ {
|
|
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
|
|
+ .info = vc4_spdif_info,
|
|
+ .get = vc4_spdif_mask_get,
|
|
+ },
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = {
|
|
@@ -1305,6 +1360,11 @@ static int vc4_hdmi_audio_init(struct vc
|
|
vc4_hdmi->audio.dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
vc4_hdmi->audio.dma_data.maxburst = 2;
|
|
|
|
+ vc4_hdmi->audio.iec_status[0] = IEC958_AES0_CON_NOT_COPYRIGHT;
|
|
+ vc4_hdmi->audio.iec_status[1] =
|
|
+ IEC958_AES1_CON_ORIGINAL | IEC958_AES1_CON_PCM_CODER;
|
|
+ vc4_hdmi->audio.iec_status[3] = IEC958_AES3_CON_FS_48000;
|
|
+
|
|
ret = devm_snd_dmaengine_pcm_register(dev, &pcm_conf, 0);
|
|
if (ret) {
|
|
dev_err(dev, "Could not register PCM component: %d\n", ret);
|
|
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
|
|
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
|
|
@@ -107,6 +107,8 @@ struct vc4_hdmi_audio {
|
|
struct snd_pcm_substream *substream;
|
|
|
|
bool streaming;
|
|
+
|
|
+ unsigned char iec_status[4];
|
|
};
|
|
|
|
/* General HDMI hardware state. */
|