mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
384 lines
9.8 KiB
Diff
384 lines
9.8 KiB
Diff
From 322899a48088cb09b3f2a068f78c93a63615da9e Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Sat, 20 Nov 2021 10:48:36 +0000
|
|
Subject: [PATCH] dt: Create static regulators and clocks for camera
|
|
nodes
|
|
|
|
Unloading regulators through dynamic device tree doesn't work
|
|
as the regulators will unregister whilst clients are still
|
|
registered. Whilst the regulator framework does WARN when that
|
|
happens, the client putting the regulator then typically results
|
|
in a NULL dereference and badness.
|
|
|
|
Instead of creating regulators and clocks from the overlays,
|
|
create regulators and clocks for the sensors in the base DT.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2708-rpi-b.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 21 ++++--------
|
|
arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2708-rpi-zero.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm270x.dtsi | 33 +++++++++++++++++++
|
|
arch/arm/boot/dts/bcm2710-rpi-2-b.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 21 ++++--------
|
|
arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++-
|
|
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 1 -
|
|
.../boot/dts/bcm283x-rpi-cam1-regulator.dtsi | 10 ------
|
|
16 files changed, 80 insertions(+), 50 deletions(-)
|
|
delete mode 100644 arch/arm/boot/dts/bcm283x-rpi-cam1-regulator.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
@@ -5,7 +5,6 @@
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
|
|
@@ -116,6 +115,9 @@
|
|
gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
|
|
@@ -4,7 +4,6 @@
|
|
#include "bcm2708-rpi.dtsi"
|
|
#include "bcm283x-rpi-smsc9512.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-b", "brcm,bcm2835";
|
|
@@ -123,6 +122,9 @@ i2c_csi_dsi: &i2c1 {
|
|
gpio = <&gpio 27 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
@@ -5,7 +5,6 @@
|
|
#include "bcm283x-rpi-smsc9512.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-b", "brcm,bcm2835";
|
|
@@ -110,6 +109,9 @@
|
|
gpio = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
@@ -8,21 +8,14 @@
|
|
/ {
|
|
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
|
|
model = "Raspberry Pi Compute Module";
|
|
+};
|
|
+
|
|
+&cam1_reg {
|
|
+ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
|
|
- cam1_reg: cam1_reg {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "cam1-regulator";
|
|
- gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
|
- enable-active-high;
|
|
- status = "disabled";
|
|
- };
|
|
- cam0_reg: cam0_reg {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "cam0-regulator";
|
|
- gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
|
|
- enable-active-high;
|
|
- status = "disabled";
|
|
- };
|
|
+cam0_reg: &cam0_regulator {
|
|
+ gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&uart0 {
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
@@ -5,7 +5,6 @@
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
#include "bcm2708-rpi-bt.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
@@ -167,6 +166,9 @@
|
|
gpio = <&gpio 44 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-zero.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts
|
|
@@ -4,7 +4,6 @@
|
|
#include "bcm2708-rpi.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
|
|
@@ -114,6 +113,9 @@
|
|
gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
@@ -5,7 +5,6 @@
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
|
|
@@ -116,6 +115,9 @@
|
|
gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm270x.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm270x.dtsi
|
|
@@ -153,6 +153,39 @@
|
|
};
|
|
};
|
|
|
|
+ cam1_reg: cam1_regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "cam1-reg";
|
|
+ enable-active-high;
|
|
+ /* Needs to be enabled, as removing a regulator is very unsafe */
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ cam1_clk: cam1_clk {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ cam0_regulator: cam0_regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "cam0-reg";
|
|
+ enable-active-high;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ cam0_clk: cam0_clk {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ cam_dummy_reg: cam_dummy_reg {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "cam-dummy-reg";
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
__overrides__ {
|
|
cam0-pwdn-ctrl;
|
|
cam0-pwdn;
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
|
|
@@ -5,7 +5,6 @@
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
|
|
@@ -116,6 +115,9 @@
|
|
gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
@@ -6,7 +6,6 @@
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
#include "bcm271x-rpi-bt.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
|
|
@@ -188,6 +187,9 @@
|
|
gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
@@ -6,7 +6,6 @@
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
#include "bcm271x-rpi-bt.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
|
|
@@ -197,6 +196,9 @@
|
|
gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
@@ -8,21 +8,14 @@
|
|
/ {
|
|
compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
|
|
model = "Raspberry Pi Compute Module 3";
|
|
+};
|
|
+
|
|
+&cam1_reg {
|
|
+ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
|
|
- cam1_reg: cam1_reg {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "cam1-regulator";
|
|
- gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
|
- enable-active-high;
|
|
- status = "disabled";
|
|
- };
|
|
- cam0_reg: cam0_reg {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "cam0-regulator";
|
|
- gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
|
|
- enable-active-high;
|
|
- status = "disabled";
|
|
- };
|
|
+cam0_reg: &cam0_regulator {
|
|
+ gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&uart0 {
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts
|
|
@@ -5,7 +5,6 @@
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
#include "bcm2708-rpi-bt.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
|
|
@@ -188,6 +187,9 @@
|
|
gpio = <&gpio 40 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
@@ -279,7 +279,6 @@
|
|
#include "bcm2711-rpi-ds.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
@@ -548,6 +547,9 @@
|
|
gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
+cam0_reg: &cam_dummy_reg {
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
|
@@ -297,7 +297,6 @@
|
|
#include "bcm283x-rpi-csi0-2lane.dtsi"
|
|
#include "bcm283x-rpi-csi1-4lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
-#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
--- a/arch/arm/boot/dts/bcm283x-rpi-cam1-regulator.dtsi
|
|
+++ /dev/null
|
|
@@ -1,10 +0,0 @@
|
|
-// SPDX-License-Identifier: GPL-2.0
|
|
-
|
|
-/ {
|
|
- cam1_reg: cam1_reg {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "cam1-reg";
|
|
- enable-active-high;
|
|
- status = "disabled";
|
|
- };
|
|
-};
|