openwrt/target/linux/ramips/dts/mt7621_iptime_ax2004m.dts
Sungbo Eo ec45f2f246 ramips: rename mtd partition of ipTIME NAND devices
Contrary to common ipTIME NOR devices, the "Config" partition of T5004
and AX2004M contain normal U-Boot environment variables. Renaming the
partition into "u-boot-env" serves for better description, and it also
conforms to common naming practice in OpenWrt.

This patch might also be extended to A3004T, but its u-boot-env
partition layout has not been confirmed yet.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2024-03-10 16:32:14 +09:00

193 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "iptime,ax2004m", "mediatek,mt7621-soc";
model = "ipTIME AX2004M";
aliases {
led-boot = &led_cpu;
led-failsafe = &led_cpu;
led-running = &led_cpu;
led-upgrade = &led_cpu;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_cpu: cpu {
function = LED_FUNCTION_CPU;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "amber:wlan2g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0radio";
};
wlan5g {
label = "amber:wlan5g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1radio";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&nand {
status = "okay";
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
mediatek,bmt-remap-range = <0x000000 0x580000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x80000>;
};
partition@100000 {
label = "factory";
reg = <0x100000 0x80000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0xe00>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
precal_factory_e10: precal@e10 {
reg = <0xe10 0x19c10>;
};
};
};
partition@180000 {
label = "firmware";
reg = <0x180000 0x7680000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7280000>;
};
};
/* last 8 MiB is reserved for NMBM bad block table */
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "wdt";
function = "gpio";
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_4 3>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_factory_4 1>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan4";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan2";
};
port@4 {
status = "okay";
label = "lan1";
};
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>;
nvmem-cell-names = "eeprom", "precal";
};
};