openwrt/target/linux
Magnus Frühling 36234df96c ipq40xx: add support for ZyXEL WRE6606
Specifications:
SOC:	Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core
RAM:	128 MB Nanya NT5CC64M16GP-DI
FLASH:	16 MiB Macronix MX25L12845EMI-12G
ETH:	Qualcomm QCA8072
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2
INPUT:  WPS, Mode-toggle-switch
LED:	Power, WLAN 2.4GHz, WLAN 5GHz, LAN, WPS
        (LAN not controllable by software)
        (WLAN each green / red)
SERIAL:	Header next to eth-phy.
        VCC, TX, GND, RX (Square hole is VCC)
        The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet (Correct MAC-address)
 - 2.4 GHz WiFi (Correct MAC-address)
 - 5 GHz WiFi (Correct MAC-address)
 - Factory installation from tftp
 - OpenWRT sysupgrade
 - LEDs
 - WPS Button

Not Working:
 - Mode-toggle-switch

Install via TFTP:

Connect to the devices serial. Hit Enter-Key in bootloader to stop
autobooting. Command `tftpboot` will pull an initramfs image named
`C0A86302.img` from a tftp server at `192.168.99.08/24`.
After successfull transfer, boot the image with `bootm`.

To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`.

append-cmdline patch taken from chunkeeys work on the NBG6617.

Signed-off-by: Magnus Frühling <skorpy@frankfurt.ccc.de>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Christian Lamparter <chunkeey@googlemail.com>
(cherry picked from commit 4b280ad91a)
2018-06-21 07:02:37 +02:00
..
apm821xx kernel: bump 4.14 to 4.14.48 for 18.06 2018-06-07 09:03:24 +02:00
ar7 kernel: bump 4.9 to 4.9.102 for 18.06 2018-05-24 16:03:58 +02:00
ar71xx ar71xx: add support for OCEDO Koala 2018-06-21 07:02:30 +02:00
arc770 arc770: remove source-only 2018-05-24 17:24:30 +02:00
archs38 kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
armvirt arm64: enable harden branch predictor 2018-04-27 21:34:18 +02:00
at91 kernel: bump 4.9 to 4.9.102 for 18.06 2018-05-24 16:03:58 +02:00
ath25 ath25: drop 4.9 kernel support 2018-05-24 17:24:30 +02:00
bcm53xx kernel: bump 4.14 to 4.14.48 for 18.06 2018-06-07 09:03:24 +02:00
brcm47xx kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
brcm63xx kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
brcm2708 kernel: bump 4.9 to 4.9.109 for 18.06 2018-06-18 15:28:48 +02:00
cns3xxx kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
gemini kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
generic kernel: atm: pppoatm fix vc-mux connection failures 2018-06-18 21:29:34 +02:00
imx6 kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
ipq40xx ipq40xx: add support for ZyXEL WRE6606 2018-06-21 07:02:37 +02:00
ipq806x ipq806x: add support for NEC Aterm WG2600HP 2018-06-19 22:44:27 +02:00
ixp4xx kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
kirkwood kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
lantiq kernel: bump 4.14 to 4.14.48 for 18.06 2018-06-07 09:03:24 +02:00
layerscape kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mediatek mediatek: mt7622: Do not deactivate CONFIG_BLK_DEV 2018-06-18 21:21:55 +02:00
mpc85xx kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
mvebu mvebu: reduce speed to gen1 for espressobin pcie 2018-06-19 12:54:24 +02:00
mxs kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
octeon kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
octeontx kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
omap kernel: enable EXPORTFS by default 2018-05-24 17:24:31 +02:00
orion orion: remove linux 4.4 support 2018-04-19 14:38:57 +02:00
oxnas oxnas: reboot target 2018-06-18 18:44:14 +02:00
pistachio kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
ramips ramips: Add support for Mikrotik RouterBOARD RBM33g 2018-06-21 06:55:10 +02:00
rb532 treewide: move nand_do_upgrade call to platform_do_upgrade 2018-02-16 14:44:02 +01:00
sunxi kernel: bump 4.9 to 4.9.108 for 18.06 2018-06-18 06:42:18 +02:00
uml kernel: bump 4.9 to 4.9.102 for 18.06 2018-05-24 16:03:58 +02:00
x86 kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
Makefile