Rosen Penev
360c181dd7
kernel: backport GPIO LED patch for MT7530 ...
This allows to specify and control switch LEDs on devices using mt7530
(typically mediatek and ramips targets).
Normally these LED GPIOs are 0, 3, 6, 9, and 12. wan/lan assignment is
per device. GPIO 9 is normally inverted. so GPIO_ACTIVE_HIGH instead of
GPIO_ACTIVE_LOW.
Tested on Linksys E7350.
Refreshed all patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-23 18:50:31 +02:00
2021-10-22 21:25:18 +02:00
2021-08-29 17:07:19 +02:00
2021-09-13 13:04:21 +02:00
2021-10-12 19:22:08 -10:00
2021-06-13 23:30:10 +02:00
2021-10-21 00:17:36 +02:00
2021-10-22 21:25:18 +02:00
2021-10-21 00:17:36 +02:00
2021-10-21 17:38:17 +02:00
2021-10-22 13:46:22 +02:00
2021-10-21 00:17:36 +02:00
2021-10-21 00:17:36 +02:00
2021-10-21 00:17:36 +02:00
2021-10-10 16:44:15 +02:00
2021-10-23 18:50:31 +02:00
2021-10-05 23:54:18 +02:00
2021-10-23 18:50:25 +02:00
2021-10-02 18:15:23 +02:00
2021-09-09 20:24:12 +02:00
2021-10-09 18:44:55 +02:00
2021-10-21 00:17:36 +02:00
2021-10-22 22:12:24 +02:00
2021-10-02 18:13:46 +02:00
2021-10-21 00:17:36 +02:00
2021-10-05 23:54:48 +02:00
2021-10-09 19:27:11 +02:00
2021-04-21 10:31:10 +01:00
2021-08-29 17:07:19 +02:00
2021-10-03 01:13:18 +02:00
2021-08-29 17:07:19 +02:00
2021-10-10 00:09:22 +01:00
2021-08-29 17:07:19 +02:00
2021-10-21 00:17:36 +02:00
2021-10-21 00:17:36 +02:00
2021-10-10 00:57:56 +02:00
2021-10-03 01:13:18 +02:00
2021-10-18 21:32:36 +02:00
2021-04-21 10:31:10 +01:00
2021-10-21 00:17:36 +02:00
2021-10-17 14:13:22 +02:00
2021-02-10 15:47:18 +01:00
360c181dd7