openwrt/target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

167 lines
2.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7240.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "D-Link DIR-615 E4";
compatible = "dlink,dir-615-e4", "qca,ar7240";
aliases {
led-boot = &led_power_amber;
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_pins>;
led_power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
led_power_amber: power_amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "green:lan4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan_amber {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
wan_green {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <33000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x30000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "nvram";
read-only;
};
partition@40000 {
compatible = "denx,uimage";
reg = <0x40000 0x3b0000>;
label = "firmware";
};
partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth1 {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002b";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&pinmux {
switch_led_pins: pinmux_switch_led_pins {
pinctrl-single,bits = <0x0 0x0 0xf8>;
};
};