mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
9703a2adcc
Refresh all patches on top of kernel 5.10.138. The following patches were applied upstream: bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more. bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch Fixes:89956c6532("kernel: bump 5.10 to 5.10.138") Fixes:4209c33ae2("kernel: bump 5.10 to 5.10.137") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
29 lines
850 B
Diff
29 lines
850 B
Diff
From b4e6e3b95c4f41b415d9d7fed7f121a1850af042 Mon Sep 17 00:00:00 2001
|
|
From: Michael Zoran <mzoran@crowfest.net>
|
|
Date: Sat, 11 Feb 2017 01:18:31 -0800
|
|
Subject: [PATCH] ARM64: Force hardware emulation of deprecated
|
|
instructions.
|
|
|
|
---
|
|
arch/arm64/kernel/armv8_deprecated.c | 5 +++++
|
|
1 file changed, 5 insertions(+)
|
|
|
|
--- a/arch/arm64/kernel/armv8_deprecated.c
|
|
+++ b/arch/arm64/kernel/armv8_deprecated.c
|
|
@@ -183,10 +183,15 @@ static void __init register_insn_emulati
|
|
|
|
switch (ops->status) {
|
|
case INSN_DEPRECATED:
|
|
+#if 0
|
|
insn->current_mode = INSN_EMULATE;
|
|
/* Disable the HW mode if it was turned on at early boot time */
|
|
run_all_cpu_set_hw_mode(insn, false);
|
|
+#else
|
|
+ insn->current_mode = INSN_HW;
|
|
+ run_all_cpu_set_hw_mode(insn, true);
|
|
insn->max = INSN_HW;
|
|
+#endif
|
|
break;
|
|
case INSN_OBSOLETE:
|
|
insn->current_mode = INSN_UNDEF;
|