Leon M. George 3501db9b9b ramips: add support for cudy WR2100 ... Specifications SoC: MT7621 CPU: 880 MHz Flash: 16 MiB RAM: 128 MiB WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac MT7603E / MT7615E Ethernet: 5x Gbit ports Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. R4 & R5 need to be shorted (0-100Ω) for the UART to work. Signed-off-by: Leon M. George <leon@georgemail.eu> [remove non-required switch-port node - remove trgmii phy-mode] Signed-off-by: David Bauer <mail@david-bauer.net>		2021-05-26 23:10:37 +02:00
..
etc	ramips: add support for cudy WR2100	2021-05-26 23:10:37 +02:00
lib	ramips: mt7621: Add support for ZyXEL NR7101	2021-05-09 09:15:44 +02:00
sbin